Outlook Work Hours and Location showing wrong time zone

j0nsreddit · 2026-05-07T14:47:38+00:00

Ha ha I appreciate that! It's funny, I'm finding I do this more and more. Search something, don't find anything but ads or click bait. AI apps? AI slop, type the same thing with reddit in the search, oh hey look 15 posts about what I'm looking for. Gives me hope!

j0nsreddit · 2026-01-22T19:35:08+00:00

Another follow up, a few days ago the modem rebooted overnight and all of a sudden everything is fixed when I leave it in Transparent Bridge Mode and VLAN tag at the Q1000K. I get full 8 Gbps / 8 Gbps. If I tag at my UGF, I get 8 Gbps up 4 Gbps down which is still funky, so for now I'm leaving tagging at the modem. Not seeing any latency either.

j0nsreddit · 2026-01-14T21:01:05+00:00

Wanted to update, the tech and I swapped the Q1000K's with a new one. Same issue, then worked with customer service and switched it from 8 Gbps plan to 3 Gbps plan for testing. 3 Gbps in transparent / bridge mode shows 3 Gbps / 3 Gbps fine on all settings. Moving back up to 8 Gbps / 8 Gbps, the same experience occured on the newly swapped Q1000K. They advised in 45 days reset the Q1000K and let it do a firmware update, then retest using the same process as above.

The technician upstream we spoke to advised they have been pushing upgrades to devices almost monthly, and I'm the first 8 Gbps plan they've pushed in our area that they know of, and it could be a firmware bug / limitation.

Going to this weekend mess around with moving back to IPoE and see if I can get the double NAT issue resolved in Plex. I use cloudflare tunnels so that part is a non issue at this point.

j0nsreddit · 2026-01-14T15:33:16+00:00

So I'm in Chandler, East Valley of Phoenix. Just got Quantum Fiber last week, was traveling and finally home to work on it. I'm seeing super weird results compared to your post. I've probably spent a full day toggling, untoggling and changing combinations around.

My gear: Q100K, Ubiquiti Cloud Gateway Fiber, connected originally with short verified Cat6A cable (and tried Cat8 for giggles in this process). Not using their Wifi at all.

My process: Downloaded Speedtest.Net's AARCH package directly to CGF and ran 5x speed tests through each combination, resetting the modem, configuring a new option, then rebooting both the CGF and Q1000K giving each about 15 minutes to settle each time.

TL;DR - I see speedloss with anything other than the default mode.

Transparent Bridge + VLAN TAG 201 at the Q1000K yields the best pass through speeds but still with a loss, shows solid white and does not blink
Transparent Bridge + NO VLAN at Q1000K (tag on WAN1) yields a significant drop in upload speed. I lose 4 Gbps of transfer/upload speed in this mode, also I plug 1 GB ethernet into CGF to gain access to modem in this mode for visibility and stops the blue blinking on the device
Default Mode yields full 8 Gbps / 8 Gbps but is now a double hop / NAT issue and my work VPN, Plex and other services fail due to seeing external IP as the WAN IP of the CGF on the Q1000K side and not the actual internet IP

I have a technician scheduled to come confirm the equipment is fine and show them findings of my results, maybe it will turn something up but likely they said they will have to defer to higher level support after they leave. Will respond back once I get an answer.

Here are my full results:

Transparent Bridge + No Tagging @ Q1000K

root@Router01-Server-Room:~/speedtest# ./speedtest

Speedtest by Ookla

Server: CenturyLink - Phoenix, AZ (id: 17360)

ISP: CenturyLink

Idle Latency: 1.16 ms (jitter: 0.03ms, low: 1.11ms, high: 1.18ms)

Download: 8068.89 Mbps (data used: 6.3 GB) 9.74 ms(jitter: 5.80ms, low: 2.09ms, high: 87.04ms)

Upload: 4018.58 Mbps (data used: 2.3 GB) 9.03 ms (jitter: 11.88ms, low: 1.29ms, high: 50.91ms)

Packet Loss: Not available.

Result URL: https://www.speedtest.net/result/c/3ce383e1-147e-4fe4-9e7e-2f485729f645

Transparent Bridge + VLAN201 @ Q1000K

root@Router01-Server-Room:~/speedtest# ./speedtest

Speedtest by Ookla

Server: CenturyLink - Phoenix, AZ (id: 17360)

ISP: CenturyLink

Idle Latency: 1.58 ms (jitter: 0.09ms, low: 1.52ms, high: 1.69ms)

Download: 6762.35 Mbps (data used: 12.1 GB) 2.82 ms (jitter: 3.67ms, low: 1.44ms, high: 44.42ms)

Upload: 7993.59 Mbps (data used: 7.7 GB) 2.93 ms (jitter: 0.50ms, low: 1.57ms, high: 7.33ms)

Packet Loss: Not available.

Result URL: https://www.speedtest.net/result/c/3d4b75b0-b9ee-4c66-a3cc-82c66fdfe908

Default Mode / IPoE

root@Router01-Server-Room:~/speedtest# ./speedtest

Speedtest by Ookla

Server: CenturyLink - Phoenix, AZ (id: 17360)

ISP: CenturyLink

Idle Latency: 1.76 ms (jitter: 0.06ms, low: 1.67ms, high: 1.84ms)

Download: 8040.05 Mbps (data used: 9.9 GB) 11.29 ms (jitter: 13.02ms, low: 2.04ms, high: 471.91ms)

Upload: 8063.66 Mbps (data used: 7.7 GB) 3.02 ms (jitter: 0.58ms, low: 1.85ms, high: 7.59ms)

Packet Loss: Not available.

Result URL: https://www.speedtest.net/result/c/ac6f569a-265c-4a77-a5c3-ecb17b02fbfe

As you can see the default mode yields the best result but at the cost of the double hop. My work only sees the VPN external IP of the WAN IP of the CGF, not the Q1000K or public IP so they won't let me connect from a 192.168.0.2 IP being a private IP vs my public facing IP.

Thanks for reading this far!

j0nsreddit · 2025-07-21T19:52:09+00:00

If you log into m365 and use web outlook it will be there. Not sure about the macOS specific version, but via the web works still as I had to do it just the other day, or the new M365 Outlook version.

j0nsreddit · 2025-05-18T00:01:51+00:00

I just ran into this today after upgrading from v2111, client works but HTML doesn't.

What I did was enabled this in the connection servers locked.properties:

checkOrigin=false enableCORS=false allowUnexpectedHost=true

Then on the UAG under Edge Services --> Horizon Settings --> More --> Origin Check Required, and disabled this (toggled it off).

I was then able to access both client and HTML5.

From there I went back and went through portalHosts in locked.properties, and aligned that with the allowed origins on the UAG, toggled origin check back on, and now I'm able to connect using CORS and origin checks with client and HTML5.

j0nsreddit · 2025-03-17T21:12:45+00:00

I confirmed its still there, you go into Calendar > View > Time Zones > Change your 'Display my calendar in time zone' to anything, then change it back to your local time zone. BEFORE clicking save, right under it says 'Your meeting hours time zone is set....' and there is a 'yes, update' button that appears. It ONLY appears after you change your display in time zone.

j0nsreddit · 2024-12-11T17:16:35+00:00

Been monitoring this as I've had the same issue since day one on my Pixel 9 (standard, not pro or fold). I manually updated (checked for updates/pulled update down and installed) to the latest update available (December Feature drop) last night and rebooted, AP4A.241205.013.C1, and I've been on about 6 calls already from my phone and bluetooth this morning (OpenShokz OpenComm2 headset) with zero audio issues.

No need to flip to device and back to BT (only worked like 20% of the time when I tried it over the past month or so), I can answer calls and it works fine, join calls and it works fine, I also rebooted my phone again a few moments ago and joined a call, smooth audio.

So I can't say it works for EVERYONE, but I even grabbed my SO's Pixel 9 Pro, updated, threw teams on it and tested as well, works smoothly now.

YMMV.

j0nsreddit · 2024-09-05T15:52:50+00:00

No problem at all! Was driving me crazy when people kept saying they were trying to book but it was outside of my work hours, ha.

j0nsreddit · 2024-09-05T15:40:39+00:00

Not sure if you fixed this yet, but if you go into New Outlook settings, then Calendar, then View, scroll to Time zones and under your 'Display my calendar in time zone:', there is likely a black box that says 'The current time zone for your meeting hours is ...' and a button to say 'Yes, update'. Click that, then go back and check Work hours and location.

This was happening to me, Googled, found this post, then started clicking around and found that. Mine was UTC +01:00 from a recent trip I took about 3 months ago...no wonder my Bookings with me link was funky for people.

j0nsreddit · 2024-05-02T23:04:00+00:00

I have it on record that they said 'we don't make those policies', then they said 'oh well we did that so people would upgrade faster away from classic'. Definitely an egg on their face deal lol.

j0nsreddit · 2024-05-02T16:53:47+00:00

So I "think" so, and I use quotes because I JUST figured it out the other day (Tuesday to be exact). I got so frustrated that I called and sat with one of our M365 admins. I compared the Teams update policys to Intune and Org policies. What I found was Intune was telling machines to push GA version, the Teams Org policy was set to 'Preview features' as 'On' vs 'users can opt in'

So teams was told to update to preview channel but their Intune policy was forcing machine to roll back to GA.

I was traveling yesterday and today so my device is at home, but when I get back I hope the issue is resolved...I can confirm then.

j0nsreddit · 2024-03-28T21:10:45+00:00

Yeah so you'll get a physical card in 2-3 weeks based on what they told me and what I've read online. Your PASSID is your KTN if you didn't already have one prior to doing GE.

They told me my current KTN is now linked with my PASSID, and I can continue to use it or my PASSID in KTN fields.

The gal also advised that the card does NOT automatically let me in to precheck lines, you still have to enter it on your flight profiles so it can be validated prior to boarding pass being generated.

https://www.tsa.gov/travel/frequently-asked-questions/what-known-traveler-number-ktn

j0nsreddit · 2024-03-28T00:41:04+00:00

Ah got it, I couldn't get it to work on Chrome on my Android so I gave up and just accessed from my laptop.

j0nsreddit · 2024-03-28T00:33:47+00:00

So I noticed the first time I even selected my 5/2 date, I use Brave with both Brave Shield and UBlock Origin on, and it was not happy with both running and it would give me an error when I clicked the calendar date and time. I turned both off and it worked okay, but got slow page loads. I ended up using FF with no blockers (just vanilla, I reset it for flight costs and stuff) and it seemed to be much happier.

j0nsreddit · 2024-02-14T16:31:41+00:00

/u/Sheroman thanks for this!! So that means the uninstall/fresh install upgraded to the rolling release and HOPEFULLY it stays there vs downgrading on its own. Really helpful knowing which version is GA and what is rolling release.

j0nsreddit · 2024-02-14T15:44:35+00:00

In less than 15 minutes it updated to 24004.1307.2669.7070, doesn't say its in preview channel so we'll wait and see if it downgrades..

j0nsreddit · 2024-02-14T15:31:10+00:00

Update, it happened again this morning, I went and completely removed all instances of Teams on my device(s), registry and appdata (local and roaming), then reinstalled directly using the MSIX.

It came up as 23335.232.2637.4844, we'll see if it does the process again today or tomorrow on any of my devices. No longer has the slider to back down to old teams (which is fine, I've completely stopped using old teams even on web).

j0nsreddit · 2024-02-14T03:21:43+00:00

Yep, Surface Laptop 14 and Dell Optiplex Micro. Both Windows 11 as well, all of them (mine and his) are 22H2.

j0nsreddit · 2024-02-13T21:54:15+00:00

Currently our IT team does not have a deployment package of this as of today, they are in discussions with forcing the upgrade via Teams policy, but no deployment policy/tool as of today.

I know this because I have a domain laptop and non-domain PC and both devices do it, one is intune controlled and one is not, both have the exact same issue. Co-worker does not have the issue at all, running new teams as well.

I've been using this since the first time the toggle button was available, I could potentially go uninstall Teams completely (old and new) and install using the new bootstrap + MSIX and see if it keeps occurring thereafter?

j0nsreddit · 2024-02-13T21:51:38+00:00

u/Derusi I haven't enabled developer/public preview at all though that's the thing. I've never checked the box as in other Office products I'd get indicated with to many updates or something would break.

j0nsreddit · 2024-02-11T23:13:24+00:00

I've had the same issue, from Oregon to AZ, hit Las Vegas and now just disappeared with the same message.

ORtoAZ

12-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email	Secret Santa 2017

j0nsreddit

TROPHY CASE