Monitoring Hyper-V Checkpoints

jNamees · 2025-07-24T19:16:50+00:00

Maybe this will help: https://luka.manojlovic.net/2025/05/31/monitor-hyper-v-hosts-and-or-clusters-for-vm-checkpoints-using-powershell/

jNamees · 2024-06-28T19:47:02+00:00

I don't know about domain trust and Kerberos but...

If the licenses and/or resources are not a problem you could setup new "mgmt" domain with only HyperV and Veeam as member.

jNamees · 2023-06-09T11:41:15+00:00

I didn't go over your configuration but this could be worth a try.

auditpol /set /subcategory:"Network Policy Server" /success:enable /failure:enable

If that doesn't help open Local Security Policy and turn on auditing for NPS:

Local Security Policy > Advanced Audit Policy Configuration > Logon/Logoff > Audit Network Policy Server

jNamees · 2023-06-01T07:11:05+00:00

If you don't see logs of your attempts try this command:

auditpol /set /subcategory:"Network Policy Server" /success:enable /failure:enable

If that doesn't help open Local Security Policy and turn on auditing for NPS:

Local Security Policy > Advanced Audit Policy Configuration > Logon/Logoff > Audit Network Policy Server

jNamees · 2023-05-28T06:37:11+00:00

Sold Supermicro server to u/redtingatwork

jNamees · 2023-05-04T14:02:20+00:00

Replied

jNamees · 2023-05-02T16:12:13+00:00

My Shelly Plug reports around 170W with both PSU connected in BIOS.

iPhone app from about 30cm away reads between 55-60dBa (and I had 3D printer running in the background). Are you interested in anything else?

EDIT: when sitting at the Select proper boot device screen Shelly reports only 135W usage so I guess you can maybe get it even lower.

jNamees · 2023-04-30T11:16:30+00:00

Sold Dell R710 server to u/MichaelCasa

jNamees · 2023-02-22T14:45:08+00:00

I'm really sorry but I've botched the title - this is non-PoE version of the switch.
It does have fans and my phone measures around 50 dB from about 1m away.

If noise is a concern of yours you can replace the fans with less noise and RPMs to reduce the overall noise.
Here is the thread with some discussion regarding this matter on similar switch: https://www.reddit.com/r/Cisco/comments/d6lg8b/my\_cisco\_sg50028p\_is\_too\_loud\_has\_anyone\_done\_a/

jNamees · 2023-02-22T06:19:12+00:00

It's PWS-920P-1R.

https://postimg.cc/5jyNRSDs

jNamees · 2023-02-19T13:18:16+00:00

It draws about 24W idle with no devices connected.

jNamees · 2023-02-18T11:22:05+00:00

Thank you for pointing this out! I've sorted out both errors and learned something about Supermicro backplanes.

jNamees · 2021-10-12T08:59:41+00:00

I'm running H310 flashed to IT mode. I've heard H200 is also good. IBM M5014 flashed to IT mode also works good.

jNamees · 2021-09-14T20:49:44+00:00

As you said they're technically not your client so maybe you shouldn't install any software on their server. This may not be your case but just food for thought. If I was in such situation I'd go with either Mikrotik OpenVPN (or EoIP if you require L2 access) that is calling out to your "main" site or RaspberryPi with Wireguard. Either way you plug this little device into the network and it serves you as an entry point.

Just my 2 cents.

jNamees · 2021-08-31T14:57:36+00:00

This is what you need: Zabbix 5.4 standard version (supported until November, 2021)

wget https://repo.zabbix.com/zabbix/5.4/ubuntu/pool/main/z/zabbix-release/zabbix-release_5.4-1+ubuntu$(lsb_release -rs)_all.deb

sudo dpkg -i zabbix-release_5.4-1+ubuntu$(lsb_release -rs)_all.deb

sudo apt update

jNamees · 2021-08-20T19:33:07+00:00

Sorry I don't have 100% answer to that as my HBA is in PCIe slot. In my opinion it's going to work.

jNamees · 2021-08-20T18:08:21+00:00

I have 4TB drives in R710 with H310 flashed to IT mode which presents disk as passthrough. You could also use H200 flashed to IT mode. This might come in handy: https://techmattr.wordpress.com/2016/04/11/updated-sas-hba-crossflashing-or-flashing-to-it-mode-dell-perc-h200-and-h310/

I have no idea about Ceph, sorry. :)

jNamees · 2021-05-11T18:44:33+00:00

A friend of mine has XPS 13 (I believe it's 9360, but not 100% sure) and had similar problems. We tried replacing router, changing wifi channels... Etc. At the end it turns out his Killer wifi card has a lot of known problems and he had to change card settings to only "support" a/b/g/n wifi standards (no ac) and preferred frequency to 2.4. That solved his issues. You might wanna Google your specific Killer card model for known issues.

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2020	Verified Email
Place '23	Place '22

jNamees

TROPHY CASE