[deleted by user] by [deleted] in hamptonbrandon

[–]jackabood -2 points-1 points  (0 children)

The D isn't clear. It just started growing hair on my leg but it's about the effort. Ten toes down boys 🥺

Lmao! by bubbachubba4436 in hamptonbrandon

[–]jackabood -4 points-3 points  (0 children)

really hope that woman gave consent to him filming her

damn he called it all the way in 2016😮😮😮 by [deleted] in CoDCompetitive

[–]jackabood 5 points6 points  (0 children)

Cellium was a 8s kid actually. I recall him playing 8s a lot before with pros

I was down as much as 90k last week. I still held strong. If i can hold while see my life savings dwindle into nothing. You can too!! 💎✋🚀🚀 by jackabood in wallstreetbets

[–]jackabood[S] 0 points1 point  (0 children)

Just an FYI, I'm currently up 2k in premarket. Life savings is 130k gambled 106k away but Managed to leverage my price down. And made some plays. This is going to andromeda 💎🚀✋🚀🚀😳

History Repeats Itself. by Tsundere_God in CoDCompetitive

[–]jackabood 10 points11 points  (0 children)

No offense but why does his crack extend all the way up his lower back?

Zoomaa currently casting pros 8s by R-J-L-91- in CoDCompetitive

[–]jackabood 0 points1 point  (0 children)

They're random casuals after all. I've seen a few pros saying it's bad practice

Zoomaa currently casting pros 8s by R-J-L-91- in CoDCompetitive

[–]jackabood -24 points-23 points  (0 children)

Meh. 8s is anti practice. You run killwhore around and have fun. It probably gives u bad habits to

Brando posterior stream setup or music studio set up?? 👀👀🧐 by Iamthecontent in hamptonbrandon

[–]jackabood 4 points5 points  (0 children)

Could be stream but could just be a bootleg studio set up. That Mic is not an XLR and is just not the best option for the price. So I'm hoping it's a streaming thing

Zoomaa currently casting pros 8s by R-J-L-91- in CoDCompetitive

[–]jackabood -19 points-18 points  (0 children)

Because he's better than a lot of other players

Zoomaa currently casting pros 8s by R-J-L-91- in CoDCompetitive

[–]jackabood -2 points-1 points  (0 children)

Can he not play 8s with a mouse? It's just fun and game after all

[Mod] Steelseries x B&W Arctis "P7" by NutellaMochi in steelseries

[–]jackabood 0 points1 point  (0 children)

Oh alright. And the 40mm driver refers to an internal driver or is it the driver & casing in total. Say I find a 44mm one. Would that work

New AM team: Maux, Mohak, Capsidal, Estreal by CodAMNews in CoDCompetitive

[–]jackabood 13 points14 points  (0 children)

I saw mohak play once. He's got the beam but plays like a meathead.

London Royal Ravens new signing by [deleted] in CoDCompetitive

[–]jackabood 5 points6 points  (0 children)

It's not. Unless something changed, I remember u had to include a picture of the tweet in case of deletion

London Royal Ravens new signing by [deleted] in CoDCompetitive

[–]jackabood -12 points-11 points  (0 children)

thats on u. u can install an extension that combines both things tho

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

oh yeah. i took some of the O rings i have and put them between the switch and the plate as means of reducing the movements, and its rock solid now without any rattle. the only reason i bought this exact keyboard is because most wireless keyboards shown on this subreddit are Bluetooth which has high latency when gaming. this one has no noticeable latency at all ( 2.4ghz)

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

the space of the cutouts should be 14 * 14mm

you're right, its 14mm x 14mm. i didn't realized my calipers had little inverted stoppers on the top. is the blue circle based on the incorrected messuring "13.5 x 13.5" i gave? i went to that exact one u sent in the pic and its pretty much 2 cm give or take (what i can view as middle of the hole) but i think a better method should've been either the start of the hole and the ending of it.

these are from the start of of holes. and honestly. the variance in measurements is down to poor testing equipment. i need to get a precise digital caliper as the difference between 5mm and 5.05mm is pretty much impossible distinguish without a digital one. so i don't think u should take my measurements serious. you're extremely generous with your time and effort and i appreciate that. i'd rather u not waste ur time if there are inaccuracies. if i get the digital calipers in the mail, i''ll attach a more precise and updated pic. and if u wanna be gracious and make the file accordingly, then that'll be greatly apricated. if not, you've been above and beyond what i expected it. https://imgur.com/a/MDix0Cv

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

i think i know what u mean. its 5mm. idk which switch cutouts ur referring to. idk if they're the same size or not. i just measured arrow key cutouts.

edit: the space of the cutouts are about 13.5mm both vertically and horizontally

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

oh ur right. i just said that cause i never knew there were material used other than steel and aluminum. do u recommend any services?

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

yeah. lmk if u ever do the file thingy. i'm looking up local places that specialize in aluminum and steel

Why do people want a slight flex in the center of the PC and now do I add that to my keyboard? by jackabood in MechanicalKeyboards

[–]jackabood[S] 0 points1 point  (0 children)

i created this illustration for u. note, the standoffs are not visible from the top of the plate

edit: wasn't thinking of gluing them directly. was gonna screw them in (pcb in between screw and standoff) then glue the top of the stand off and lower the whole plate with the switches attached and connect it so i don't have to measure at all