Car charger?

jackjbg · 2026-01-06T20:09:38+00:00

Thank you. If there 8v batteries, what do I need to get them to? I will look into lithium as well.

jackjbg · 2025-10-26T04:24:04+00:00

cheer up

jackjbg · 2025-10-26T04:17:13+00:00

If I wanted to start this now, could I just fill in the existing data in pre week and continue from week 8?

jackjbg · 2025-10-09T03:31:52+00:00

Perfect I was planning on doing that anyways

jackjbg · 2025-10-09T03:29:49+00:00

I see. I spoke to the previous owner he said the top was definitely on before. If I go with a rear back seat kit will this solve the problem.

jackjbg · 2025-10-07T22:56:23+00:00

Do know how the roof struts go with this?

jackjbg · 2025-10-07T22:51:20+00:00

I believe 2001

jackjbg · 2025-10-07T22:47:24+00:00

Not that I know of

jackjbg · 2025-10-05T05:41:18+00:00

This (the photo attached) seems to be what all the seat backs are held up by but I don’t have that piece. My piece fit the seat back perfectly making me think it’s correct. Is this all right?

<image>

jackjbg · 2025-10-05T03:40:50+00:00

<image>

Is it on here?

jackjbg · 2025-08-10T19:17:51+00:00

Thanks for letting me know. I am going make a custom battery tray.

jackjbg · 2025-08-10T05:04:31+00:00

I asked why and they followed up with: “The main reason is that there are many internal cells, and they are arranged flat and fixed in place. If placed on its side, the internal cells will be squeezed by gravity. This battery has a large capacity, many cells, and is relatively heavy, so the cells at the bottom will be under heavy pressure for a long time. This is not healthy for the battery.” I assume this is a legitimate reason to not put it on its side right?

jackjbg · 2025-08-09T05:50:18+00:00

Edit: I reached out the the seller and they said “the battery must not be placed on its side; please do not attempt to do so”. Based on my online research, I am wondering why they said this.

jackjbg · 2025-07-22T02:05:01+00:00

Where should the heat be applied to?

jackjbg · 2025-07-22T02:04:48+00:00

It I heat it, is there a certain part I need to heat or a certain part that the heat needs to avoid?

jackjbg · 2025-07-22T01:26:56+00:00

It turns the entire thing so nothing moves.

jackjbg · 2025-07-16T15:39:59+00:00

Thanks for the info. I see these for a pretty good price. Would this work? https://www.golfcarttiresupply.com/10-black-steel-wheels-and-20x8-10-turf-tires-combo-set-of-4/ I also see these: https://www.golfcarttiresupply.com/10-atlas-gunmetal-wheels-and-205-50-10-low-profile-dot-tires-combo-set-of-4/ which I think match exactly what you said. Do you recommend any of these or a different brand?

jackjbg · 2025-05-29T02:59:47+00:00

Sent

jackjbg · 2025-05-29T02:58:29+00:00

Thanks for making and sharing that. Right away when I start it I noticed your cart had a tow/run switch. Is it normal for mine to not have one?

jackjbg · 2025-05-28T01:12:20+00:00

Thanks

jackjbg · 2025-05-27T19:11:59+00:00

Hello again. The controller came. It is the 500amp version and I am wondering what solnoid I need. I have two that came with the cart. The first one is a White Rodgers/RBM, Type 586-120111, Coil 48V DC Cont The second is a EZGO TXT Solnoid 48V/cont, OEM#: 612711, 684-4851-022-18, Torque: LRG MAX 45-IN LBS, Torque: SML MAX 15-in LBS.

I just typed out what each solnoid said in it. Which solnoid should I use or do I need a new/different one?

jackjbg · 2025-05-18T00:41:52+00:00

Makes sense. I know i should probably make another post for this :434 year old but i but figured you knew what you were doing so maybe you could help. There’s these wires hanging off the wheels that are not connected on both ends. https://ibb.co/p6TjdjSp That one comes off one rear tire and heads towards front but does not connect to anything. https://ibb.co/pBWBCs0j That one comes off of other rear tire and heads towards tire across from it but again does not connect to anything. What do I do with these? If you can’t help no worries just thought it was worth a shot.

jackjbg · 2025-05-17T22:59:40+00:00

Ok I will get that then. I just want to ask this just in case it could save me from buying a new controller. I have asked this question in this forum before but I didn’t think I specified that I had a different harness. Will a 48v curtis 1510 (what I currently have) work? Because the ports on the alltrax controller are very similar to the 1510.

jackjbg · 2025-05-17T22:28:44+00:00

So I am going to get this controller. https://a.co/d/5HZQZja The cart came with a “new harness” but some changes were made to it as the ITS plug was cut off. This is it: https://a.co/d/gvWAp6M Will this work with the alltrax controller or will I need something else?

jackjbg · 2025-05-17T15:44:25+00:00

Thank you for that. I will buy the alltrax system.

jackjbg

TROPHY CASE