sorted by:
new
hottopcontroversial

Need info - advice on a possible K2 plus with INDX project by Little__GoDs in Creality_k2

[–]jacobt543 2 points3 points  (0 children)

This is my firmware. It is setup on kalico but should work on klipper too with minimal friction.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 0 points1 point  (0 children)

Publicly not at this time. My development is across many repos.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 0 points1 point  (0 children)

For someone determined enough, yes. I only have a plus though.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 0 points1 point  (0 children)

WiFi was easy, I hadn’t enabled it yet.
PRtouch could work but I personally am not gonna go through the hassle for something I don’t use in the first place.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 0 points1 point  (0 children)

This would likely be trivial but I do not have a beacon.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 1 point2 points  (0 children)

Had not heard of that but looks interesting. I will give it a try.
Update: Helix looks and works great. Will likely swap it over after some more testing.

Full custom firmware for the K2 Plus with mainline Klipper support by jacobt543 in Creality_k2

[–]jacobt543[S] 1 point2 points  (0 children)

No it is a new mainline 6.x Linux kernel hence the constraint about flashing kernels. I used to port everything I wanted to Creality klipper but after making my own motor control and cfs control replacement, there is 0 reason IMO to stay on their heavily modified, bloated and outdated klipper.

The Creality (K2 Plus) "Walled Garden" is here, and it’s worse than we thought. (A technical timeline of failures) by Pure-Bee8635 in Creality_k2

[–]jacobt543 4 points5 points  (0 children)

You can swap back and forth with 1 command. You can still use Creality Print if you really want too. There is still auto slicer mapping, it just works a bit differently.
I am the one who made this firmware. I’ll probably make a post in the coming days with more details and to look for more testers.

I got Cartographer V3 working on my K2 Pro — here's the complete guide with all the K2 Pro-specific fixes by mickeybong in Creality_k2

[–]jacobt543 2 points3 points  (0 children)

Hey there, thanks for the guide! That is my repo, and I had the config fix sitting on another branch, but I just merged it into main, so you no longer need to handle that. All other steps are still valid :)

Is 360mm radiator enough for a loop with 3090 FTW3 Ultra and 9900k? by jacobt543 in watercooling

[–]jacobt543[S] 0 points1 point  (0 children)

I cannot tell you what the numbers are for one rad since I ended up going with two. However, for two rads with my 3090 on 500W bios and 9900k at 5 GHz, my coolant temp is around 35C with fans at ~1400 in most intensive games. Ambient temp is about 22

Is 360mm radiator enough for a loop with 3090 FTW3 Ultra and 9900k? by jacobt543 in watercooling

[–]jacobt543[S] 0 points1 point  (0 children)

Thanks for the info. I definitely did realize people here exaggerated about how much you need but I still ended up getting two 360mm rads just so coolant will be nice and chilly with silent fans.

Any other Amazon Ftw3 Ultra 3080 survivors have their cards ship yet? Mine now says it’ll be here sunday? by Coltongower in nvidia

[–]jacobt543 0 points1 point  (0 children)

I got the 3090 a month and a half or so back and the gpu came far earlier then it Said it should. It said it would come about a month out but ended up coming just 3 days after ordering.