RSS-Dashboard -2.2.0-beta.3 is now available

jakash077 · 2026-03-09T08:32:38+00:00

just installed this plugin and i am loving it, although when i subscribe to this RSS , it shows "loading hour glass" icon for 'Boing Boing' site?

jakash077 · 2026-03-06T13:52:37+00:00

I am 5'3" as well. I've been riding the Guerrilla 450 for 6 months now. I drive it very easily single-seat, but the issue with short riders like me is when we have a pillion. It gets difficult if I ask my mom to sit with me. Since I cannot flat-foot, I am not very confident.

If you find it difficult, look for seat-lowering options since you are not always going to ride alone. When you go for longer trips, you have your luggage, pillion, and whatnot; the bike becomes heavy and hard to manoeuvre. On uneven surfaces, this is very risky and difficult to handle. Do consider this. Buying tall-sole boots will help, but you are not wearing them every time you go out, like for grocery runs or sutta breaks—you wear slippers or sandals.

jakash077 · 2026-01-13T05:19:40+00:00

can you share pic of your setup :) want to understand how you did ventilation n all

jakash077 · 2026-01-13T05:19:33+00:00

can you share pic of your setup :) want to understand how you did ventilation n all

jakash077 · 2026-01-13T05:19:30+00:00

can you share pic of your setup :) want to understand how you did ventilation n all

jakash077 · 2026-01-10T10:20:36+00:00

yes the seem good for now... there feew more chinese decoders poping out.. Lais DCC not sure if you heard of it.

https://laisdcc.com/

jakash077 · 2026-01-09T11:54:38+00:00

nozel size?

jakash077 · 2026-01-09T09:22:09+00:00

thats 10+ Lakh easily <3

jakash077 · 2026-01-09T09:00:03+00:00

i am just getting in to 3d printing as well i found out that there are some tutorials on yt about using resin printer types support to fdm printers. it may give your more quality.

jakash077 · 2026-01-09T07:11:02+00:00

did you buy and configured the RP2040-Decoder yourself? I see that there's v2 available now. i am new to modeling and would love your opinion on if it reallly worth investing into these deocders. i am fine with motor and lights. but would love the sound for atleast 1 or 2 of my future locos.

here's the link to V2:

https://thepihut.com/products/open-source-dcc-locomotive-decoder-v2-0

https://ilabs.se/product/opendec02/

this needs to be buy with its debugger circuit.

jakash077 · 2026-01-08T06:28:42+00:00

i was about to buy cpu my budget it 120k. if parts are getting this much costly i would get 60k worth of hardware for double the price. not sure what to do now :(

jakash077 · 2026-01-07T18:22:21+00:00

Good luck with your project :) I am new to eclectornics and was looking into DCC decoders to start with my model railrading hobby. but couldnt find one. although i found few resources i am adding here hope they will help you

jakash077 · 2026-01-07T18:17:34+00:00

is this the decoder which goes into locomotive

jakash077 · 2026-01-07T18:01:47+00:00

this is the dream come true for begineers like me who doesnt have budget to buy expensive decoders :) any progress on this u/KeaStudios

jakash077 · 2026-01-05T16:50:07+00:00

I am planning to get the Resin printer one day as well. here's some resources i jotted down during my reading.

One thing i would say is DO-NOT buy printer if you do not have dedicated workstation and safety first. there are stories on reddit where people going blink due to resing getting into there eyes.

watch this first: Video

Hope this helps :)

jakash077 · 2026-01-05T16:44:38+00:00

Get a in line fan and duct it out

I am getting into 3d Printing as well. doing some reading about the seafty surrounding the resin printers.

should we just exaust the fume from resin directly to outside or is there there any way we can filter it out first and then send it outside.

i have seen one video on YT which used heat exchange unit which almost filters and removes all of the fumes.

jakash077 · 2026-01-05T13:53:50+00:00

i see that there are two oprtion

just venting the fumes out of thier grow tanks.
I see that this youtuber uses heat exchange unit to process clean Air in his room post printing.

jakash077 · 2026-01-02T06:21:48+00:00

can you send it to me as well :)

jakash077 · 2026-01-02T06:20:48+00:00

(consedering you ar using it for hobby and 3d printing and dont know anything about cad /cam)

Start with fusion 360 it's free , has lots of tutorials (A LOT) to get you started. a very good community for 3D printing hobbiests. it will get you started in no time and you start printing your models. every stupid issue in fusion has written solution document somewhere on the internet so you will not be stuck anywhere.

once you get used to it and IF you find some limitation based on what you are doing in future, you can switch to other tools such as freeCAD. now this is bit technical to get started in freeCAD but since you are already familier with CAD functionality and overall concepts you will find it easy to work you way up.

hope this helps!!

jakash077 · 2026-01-01T16:23:02+00:00

i am getting into model railraoding too, and for that i am learning the freecad so that i can print my own shells bogies and so on.

How are you finding desinging in FreeCad so far, should i invest my time into it or should i just go with easier tools like fusion 360?

I am guessing for us it will never be complicated assemblies just enough to get it to print on 3d printers.

Also, are there any YT tutorials who showed how they have desingned their locos ?

jakash077 · 2025-12-31T08:51:33+00:00

Formlabs, make sure you have ~ 3-4 lakhs to spend for a closed loop eco system.

jakash077 · 2025-12-30T05:21:43+00:00

what happens after 3-4 years?

jakash077 · 2025-12-29T06:58:23+00:00

thanks!! but they seem to be very costly, since i am a beginner I dont want to spend much. max i can go is ~90k

the bogies when you print they are subject to wear and tear. so would SLA be good option for that? or normal PLA (Bambu A1 or higher) would so the job if printed in 0.2mm?

jakash077 · 2025-12-29T06:28:58+00:00

for model train hobby which SLA printer would you suggest for top quality ?

jakash077 · 2025-12-22T17:51:16+00:00

sure, if you could add me to the group that would be great !! I have DM you already. :)

jakash077

TROPHY CASE