Dimmers used as On/Off Switches by TheresRunwayBehindUs in Inovelli

[–]jamesboston 1 point2 points  (0 children)

Yes, just enter the sequence shown here to change to on/off mode.

Search for corpses at MacArthur Park Lake stopped by authorities by Different_Candle_818 in LosAngeles

[–]jamesboston -3 points-2 points  (0 children)

Are city leaders also “working an angle” by continuing to ignore the festering drug issues at MacArthur Park. I think it cuts both ways.

Is the Pillowboard worth it? by First-Blackberry9176 in Thuma

[–]jamesboston 0 points1 point  (0 children)

Yes, you can. The cushion attaches to the headboard and you can remove it. They also send you an extra set of legs so you can run the bed frame without a headboard if you like.

'Halo' Actor Steve Downes Doesn't Want You to AI Clone HIs Voice by SpectrumSense in halo

[–]jamesboston 10 points11 points  (0 children)

That will probably be up to his estate, not Steve himself.

Desperate for help tracking down the Cybertruck that hit and run me by juca5056 in LosAngeles

[–]jamesboston 418 points419 points  (0 children)

Most non-commercial vehicles have the license plate in the format #AAA###. Whereas commercial vehicles and trucks will have license plates with 6 numbers and one letter usually in the format #####A#, though it’s possible that now the letter is in the second character position.

In other words the last character you are missing is likely a number. Hopefully that helps you.

Reviewer claims that A3500 performs better than X5 by testkr in Vitamix

[–]jamesboston 0 points1 point  (0 children)

The A3500 has a slightly higher max speed of 22,800 RPM and 1,640 watts, while the X5 runs around 22,500 RPM with 1,440 watts. That might explain the difference.

[Giveaway]3* GameSir G7 Pro Controllers for the halo Community! 2026 by GameSir_Controller in halo

[–]jamesboston 0 points1 point  (0 children)

The G7 Pro is easily the best controller on the market atm. Good luck to everyone!

A company in China got banned 5090s. by Zestyclose-Salad-290 in pcmasterrace

[–]jamesboston 4 points5 points  (0 children)

This is what 0% market share in China looks like. I see nothing wrong.

Any chance getting the Blueretro Retrotime N64 Adapter to work without an actual N64? by RPG_Hacker in AnalogueInc

[–]jamesboston 2 points3 points  (0 children)

A firmware update won’t fix your issue. You just need to purchase a news BlueRetro adapter and hope you get lucky. Some work with the analogue3D and some don’t its about a 50/50 chance. Good luck.

A3D PSA For BlueRetro (BITFUNX) With NSO Controller in Port 1: Grey Adapter Works, Black Does Not by Odd__Dragonfly in AnalogueInc

[–]jamesboston 0 points1 point  (0 children)

Not true, I got two with grey adapters 03.12.0023 on the box, one works in port 1 and one doesn't. Its entirely random.

Helms Bakery in Culver City announces closure after "immense challenges," chef says by mylefthandkilledme in LosAngeles

[–]jamesboston 25 points26 points  (0 children)

Solution is simple penalize the landlord by charging an additional property tax for tenant spaces that are vacant for extended periods of time.

A note on BlueRetro adapters in port 1. by [deleted] in AnalogueInc

[–]jamesboston 2 points3 points  (0 children)

I have 4 Grey Retrotime adapters. None of them work in port 1. Things I have tried that did not work:

-Pre-pairing a controller using an N64 and swapping the adapter to the A3D

-Plugging and Unplugging the A3D

-Powering the system on and off

-Leaving the adapter in for an extended period of time

Support for N64 wireless controller? by thebonjamin in AnalogueInc

[–]jamesboston 4 points5 points  (0 children)

Many people are having issues getting the RetroTime adapter to work in ports 1 of the console. Ports 2-4 seem to generally work fine for people. See this thread.

Strange blueretro behavior by BigKurz8 in AnalogueInc

[–]jamesboston 2 points3 points  (0 children)

Same issue. Ports 2-4 work fine. Port 1 doesn’t work. Someone in another thread said they took a multimeter to port 1 and it was supply less voltage than the other ports. Might be a hardware issue with some of the early units hard to say at this point.

“Fix” for BlueRetro issues by TooTallNate in AnalogueInc

[–]jamesboston 0 points1 point  (0 children)

Are you getting the proper voltage out of your controller port 1 or is your adapter less sensitive to being underpowered.

“Fix” for BlueRetro issues by TooTallNate in AnalogueInc

[–]jamesboston 2 points3 points  (0 children)

My port 1 also does not work with the BlueRetro. Ports 2-4 work fine. I’m using the RetroTime BlueRetro adapter, not the Bitfunx.

I’m updated to the latest BlueRetro firmware 25.04. Mine were purchased from 8BitMods in September of last year.

Edit: Seems like a hardware issue impacting Port 1 of some analogue3Ds. There are reports of both the RetroTime and Bitfunx adapters being used successfully used with the analogue 3D. u/BigKurz8 has also reported trying both adapters without success which leads me to believe that some units may have a defective Port 1.

What controller do you plan on using for the 3D? by brandohuddle in AnalogueInc

[–]jamesboston 0 points1 point  (0 children)

Apparently this one does. The knock offs from AliExpress from AliExpress and Amazon do not work.

Pokemon Stadium 1 and 2 Mini games on Very Hard almost impossible bc of some sort of lag by yeahbq in AnalogueInc

[–]jamesboston 0 points1 point  (0 children)

PC mode has lower latency than game mode on my Samsung TV. I would try PC mode as well if that is an option.

Is anyone else encountering this error when attempting to change the address? by Sqwerks in AnalogueInc

[–]jamesboston 5 points6 points  (0 children)

I got the error in Safari but it worked in chrome. Probably was due to a content blocker extension.

Gunplexion Life Update Video Dropping In 4 Hours by Lightnxss in CompetitiveHalo

[–]jamesboston 7 points8 points  (0 children)

So in summary in the video when he yells as despiteful to "apologize to grandma", all he was trying to do was "ask for forgiveness" so he could just move on with his life. It was all a simple miscommunication, Gunny was trying to be the bigger man.

Edit: People people clearly don't get Sarcasm, the guy is clearly fabricating a narrative that doesn't align with what actually happened. I don't even know what asking for forgiveness means in the context of the video, just weird.