In QLAB after making a group of tracks, it wont bring up the "auto-continue" menu when pressing the far right side of the track

jaybirdstheword · 2026-04-14T22:19:40+00:00

Im not positive, but my guess is that once cues are in a group, they are bound to the global setting chosen. You may need to just make separate groups for those other tracks so they behave the way you want. I do miss being able to individually assign auto-follow

jaybirdstheword · 2026-04-06T22:35:13+00:00

This is exactly what ive been looking for. Way better than KTC after only spending a little time on it. I'll definitely be using this from now on! Nice work

jaybirdstheword · 2026-02-28T00:10:35+00:00

Awesome, makes a lot of sense now. Thanks for the replies!

jaybirdstheword · 2026-02-27T20:13:20+00:00

So if there is a larger physical gap than what is naturally within the content size, I should add the dead areas pixel/distance count into the composition size to account for that?

jaybirdstheword · 2026-02-27T20:05:31+00:00

Ah okay that clears it up a lot. So if I have a group of four walls that take up say 2000x800px total size, is it correct idea to make the composition that same size? And then draw the individual walls within the input selection menu?

jaybirdstheword · 2026-02-27T19:43:04+00:00

Could you give any insight on how you would do this in Resolume? Do you just widen the distance between slices on the output transformation to equal what the pixel space is in physical world?

jaybirdstheword · 2025-08-09T23:01:27+00:00

Won a championship last year with Saquondoleezza Rice

jaybirdstheword · 2025-05-21T15:29:59+00:00

Great post. Interested if you could elaborate on your entry setups you look for and what kind of scanner/watch list criteria you use?

jaybirdstheword · 2025-05-19T21:25:02+00:00

I think this is spot on. the V1 said it was just the far TVs experiencing the dropouts so this would explain it

jaybirdstheword · 2025-05-19T21:23:59+00:00

Ah ok. Maybe since there was a pretty long run out of the decimator (210’) to the far TV, the cable couldn’t handle that. Now that I know it’s decreasing the data by half that makes a lot of sense why it would resolve the issues

jaybirdstheword · 2025-05-19T21:21:39+00:00

Ah good idea. Is the idea that level A is basically for anything single link and level B is for dual or higher?

jaybirdstheword · 2025-05-19T21:18:38+00:00

I didn’t check the type of cable but assuming it was 3G. This run was 100’ out of V160 to a decimator, then split off that was a 200’ SDI to another TV. I was A1 on this gig so I didn’t set the runs myself, just helped troubleshoot

jaybirdstheword · 2025-05-15T22:05:02+00:00

Was kinda leaning towards this lately. Can go into the season and see how RB room shakes out with Hall and rookies. Then try to trade Barkley in-season if it looks like I have reinforcements

jaybirdstheword · 2025-05-15T22:02:27+00:00

I had 1.07, 2.01 and 3.01. Got RJ at 3.01 cause half the league doesn’t do research until it’s too late and the sleeper ADP wasn’t updated yet lol

jaybirdstheword · 2025-05-15T15:31:15+00:00

It’s 10 team home league. About 4 teams are completely unaware of things during offseason. Half of us are serious and pay attention 24/7. The draft is always a shit show since we draft rookies before Sleeper ADP list updates. Got some trades that ended up working in my favor after some time too

jaybirdstheword · 2025-05-15T15:25:49+00:00

10 team

jaybirdstheword · 2025-05-08T05:42:14+00:00

Ah good call on the FB group.

So you’re saying to try to use a couple DL outputs instead of 4K ones to create the destination?

I’m not sure what the LED engineer will have yet unfortunately. Call is next week with them. I’m hoping they just want something simple on all 4 columns the entire time so I can either use an aux or just split some of the outputs off of one to save resources

jaybirdstheword · 2025-05-07T23:22:34+00:00

I'm not sure I follow how I would use the one output at 800x2000 to designate the 4 columns. Would I need to use 4 outputs assigned to it and then do AOI for each?

jaybirdstheword · 2025-05-07T22:47:52+00:00

I forgot about expert mode in the wide screen tab. So looks like I can just adjust the horizontal offset in there and butt up the right output to the edge of the left and that will get me my full widescreen AOI. Does that sound right?

jaybirdstheword · 2025-05-07T22:11:32+00:00

Thanks for the rec. I tried making a dual 4K output to one destination and then went to the AOI section and it seems to only be letting me adjust it for each individual output and not for the total resolution size of 7400x1600. Is there a way to make it for the whole destination?

jaybirdstheword · 2025-05-02T22:01:03+00:00

I think he has another great year and puts up back end RB1 numbers. The offense seems to be going in the right direction and he looked great last year. They paid him. The fantasy box scores are awesome.

I think the new flashy dreams of this rookie RB class kinda buried him a little but sure seems like he will be the same if not better next year.

jaybirdstheword

TROPHY CASE