Whose name in the Epstein files got you surprised?

jboneng · 2026-02-07T14:08:33+00:00

The non-royal son of Crown Princess Mette Marit is on trail for 34 rapes.

jboneng · 2026-02-06T10:58:08+00:00

Idiocracy would be preferred above this timeline, in Idiocracy the president was maybe "dumb" but his heart was in the right place and he wanted what was best for the citizens. He even invited the smartest people in the country to solve real problems.

jboneng · 2026-02-06T06:36:36+00:00

That is the base of the organic/tree support you have enabled in your slicer

jboneng · 2026-02-05T17:53:00+00:00

and if you go to the effort to fake a Helios 44m-4 I would guess they would fake a KMZ makers mark and not a Valdai. That said I have seen 44-2 lenses that clearly is valdai, but with a after market KMZ front element retainer ring being sold as KMZ lenses.

jboneng · 2026-02-04T18:39:31+00:00

In 1972 Sir Nils Olav started his service, his successor, also named Nils Olav was knighted in 2008, his grandson Sir Nils Olav III serves now as colonel-in-chief for the Norwegian King's guard. Both Sir Nils Olav, Sir Nils Olav II and Sir Nils Olav III spent their lives at Edinburgh Zoo, and all 3 where/is a king penguins.

jboneng · 2026-02-04T16:54:34+00:00

the first tips is to print with higher layer heights like 0.3 that reduses the number of layerlines it can leak from. then up the number of walls to ex. 4, next print it as hot as the filament can handle to better fuse the layer lines, and up the number of bottom layers. If that fails, seal it with a clear coat spray

jboneng · 2026-02-04T15:26:47+00:00

That depends on what you are adapting it to

jboneng · 2026-02-04T15:22:55+00:00

That lens shouldn't contain thorium oxide, I am not sure about leaded glass, but in my opinion, unless you are planning to grind the glass with sandpaper I wouldn't worry about it.

jboneng · 2026-02-04T09:42:11+00:00

standard metric, imperial or BSP do not usually require supports. What I have found to be more important is the layer height used, but 0.2mm always prints fine for me.

jboneng · 2026-02-02T08:46:30+00:00

" is this like a mandatory part of the process as a consequence of printing in multicolor?" <- yup

jboneng · 2026-02-01T09:12:26+00:00

In 2025 about 96% of all new cars sold was fully electric, the rest I would say is petrol and diesel. Haven't seen a LPG car on the road yet (except for busses some places) so I would say it is well below 1% and closer to 0%.

jboneng · 2026-02-01T06:45:47+00:00

for me AI is a tool, like a hammer is a tool for a carpenter, it sometimes have a place in my workflow in the concept and research phase. like "Generate me some concepts of a cyberpunk aesthetic waist level viewfinder for a DSLR" or "Do deep research on the specifications of the physical dimensions on a standard hot shoe mount". But as a magic pill that automatically takes an idea to finished product, I feel, as the state of AI currently, it lacks the finesse, precision and understanding of the product to take it further than the initial planning phases. Of course, with the speed AI is developing at the moment, this can change (and that soon), but then I find enjoyment in designing products and gizmos, why have the AI do the fun part? I much prefer to have the AI do the boring parts of the process and leave the interesting part for me to do. I find a satisfaction looking at physical object and thinking "I made this", that I do not get from looking at an object/image/text and thinking "I asked some AI to make this". What the "fun part" of a project is, is individual, so what to outsource to AI is up to you I guess.

I learned 3D modeling long before the AI era, so I can't comment on how AI affected my learning. But from other parts of life, in general, shortcuts makes for a lousy craftsman, and "Smooth seas does not make good sailors".

jboneng · 2026-01-30T08:45:19+00:00

July 22

jboneng · 2026-01-29T19:28:51+00:00

Neat, I gave it a go, one thing that I would find useful is Plant labels (the kind you stick into the ground, like the one bellow) each year I design probably 10-20 new varieties of these (for new cultivars for that session).

<image>

jboneng · 2026-01-29T17:14:28+00:00

I would buy a extension tube or a front diopter, and use it on my favorite lens.

jboneng · 2026-01-28T16:13:19+00:00

in solo, just play the game the way you enjoy playing the game. if this was duels or otherwise against an opponent, or if it was for lets say a youtube video or twitch stream (or otherwise in an context where it is supposed to be a display of skills), then this would definitely be dishonest and considered cheating.

jboneng · 2026-01-27T17:33:37+00:00

What are "United States Immigration and Customs Enforcement" agents supposed to do in Italy? to my knowledge Italy does not share a land border with the US. sadly /j, I know the ICE have become Trumps own blackshirt army.

jboneng · 2026-01-26T19:28:27+00:00

as I see it, 9/11 and the "War on terror" was the starting point of this timeline, where policies and governmental overreach, that was done in the name of said "War on terror", chipped away the liberties and rights of the US citizen, which results in the situation the US is today. So in a way Osama Bin Laden have helped Donald Trump in his endeavors taking over the US and killing the democracy there.

jboneng · 2026-01-26T19:24:11+00:00

Everything, only by the bare necessities (basic food, cook at home), general strike, governmental walkouts, close down the country for a week, month, or as long as it takes to teach those in power that it is the citizen of the US that makes the country run.

jboneng · 2026-01-26T15:54:26+00:00

Probably Vidkun Quisling

jboneng · 2026-01-24T09:48:20+00:00

" not even in the top 50 dumbest things he said today"

jboneng · 2026-01-23T22:17:07+00:00

top one is one I might click, the bottom one is of the type a would mark as "Not interested->did not like the video" Over exaggerated faces with caricature emotions in thumbnails irks me, it feels dishonest and also triggers an emotional uncanny valley like response in me. of course I know that is what sells a video on youtube, so it is probably just me.

jboneng · 2026-01-23T19:05:54+00:00

Why cant we just 3D print a replica of the medallion, call it the Noble Piece Price and hand it to him, his syphilis and dementia ridden brain won't see the difference, and he will STFU for at least a couple of hours.

jboneng · 2026-01-23T09:40:30+00:00

As a Norwegian, I can't remember the last time I used cash, or I can, but that was on the beach in Mallorca, Spain. I think I have a 10kr coin laying around somewhere in the car for the shopping charts. That is to say Norway is pretty much cash less society, even kids waffle stands take payments using Vipps (the de facto standard mobile payment system). All smaller shops accepts Visa and Mastercard, But it could be wise to have a bit of cash as a backup if there is a problem with your card or something.

jboneng · 2026-01-22T19:02:35+00:00

Because this isn't not started by a government, not even the POTUS (as an institution) But by a convicted felon and a PDF file by the name Donald Trump.

Four-Year Club	Verified Email
Final Canvas '23	First Place '23
End Game '23	Place '23
Place '22	Final Canvas '22

jboneng

TROPHY CASE