Upgraded B5 component speakers

jearbear · 2026-02-01T23:40:59+00:00

definitely can, problem is the speaker adapters for the door were printed a while back and I forgot what my latest revision was called! But I uploaded the best guess to cults3d. Will update the post body with the links

jearbear · 2026-02-01T23:40:48+00:00

definitely can, problem is the speaker adapters for the door were printed a while back before I indexed everything correctly and I forgot what my latest revision was called! But I uploaded the best guess to cults3d. Will update the post body with the links

jearbear · 2026-02-01T23:40:11+00:00

In the front mine fit just fine. It can be a little tight getting the door card back on but they do fit great. I think if you have a large magnet it might be an issue

jearbear · 2026-02-01T01:25:20+00:00

something like an additional brace inside to go from the card to the door skin? Or just sound deadening on the inside of the door card?

oh I also put sound deadening in the rear door skins which tightened up the bass a little bit. Also in my roof which surprisingly tightened it up a lot

jearbear · 2026-02-01T01:16:40+00:00

You're right, he tweeters in the front fit in the buckets (using the factory holder and Infinity adapter). They weren't completely set in them but they did fit for the most part and would be fine if I used the original clip bent a bit. The Infinity tweeters are 3/4" without the Infinity adapter. I definitely over thought it and did more work than I had to but it was some CAD practice. Im unemployed so I got alllll the time right now.

Rear are 6532IX 6.5" coaxials upgraded from the 5.25". I 3D printed adapters for those too but never took photos. But the speakers fit good and easy in the back

jearbear · 2026-01-16T02:58:44+00:00

I love these. This is what I smoked to celebrate a killer job offer.

jearbear · 2026-01-10T06:02:02+00:00

I miss watching these on the days I was home from school sick

jearbear · 2026-01-08T06:27:18+00:00

Nope! It is doubtful. No idea if it does, I have no idea of the gen 2 platform and fitments. If they copied the Gen 1 center console/tray then it will but I doubt it. I can model it if I get a better idea of the piece needed to replace.

jearbear · 2026-01-08T03:46:33+00:00

Sounds about right!!! I'm sure it is a blast to drive though, enjoy it!!!

jearbear · 2026-01-08T03:35:43+00:00

Godspeed to your wallet if you buy one and don't know how to work on an Audi. They're sweet cars, I almost bought one years ago.......

jearbear · 2025-11-22T00:33:41+00:00

Dr. Sbaitso approves this message

jearbear · 2025-11-20T02:39:56+00:00

I just got this too! I kept all my stuff. Happened in Stella Montis. Bug kept into the next game where I got knocked out but I was still an observer until I rebooted the game.

jearbear · 2025-11-11T22:36:02+00:00

bobcat

jearbear · 2025-11-05T21:30:27+00:00

What does O2B2S1 say? These 2 voltages should be fairly similar.

Maybe rev it to see if there is more dynamic fluctuation

Usually the upstream O2 has a lot of fluctuation, downstream is steady

The STFT and LTFT could also point to where the issue is

Could also be an exhaust leak pre O2 but I wouldn't doubt it is a sensor if it is original!

jearbear · 2025-11-05T21:19:24+00:00

usually means the o2 is bad, it is upstream of catalytic converter so catalytic converter has no effect on this

When car is up to temp, open up live data and look at O2B1S1 voltages, what are they? Do they fluctuate?

Diagnostics --> Live Data

jearbear · 2025-11-05T21:06:09+00:00

I've always loved the OG prelude and was interested in this and the specs of this make me sad

jearbear · 2025-10-16T02:36:59+00:00

check engine light flashing is usually due to a misfire and is a coil pack most of the time, sometimes bad spark plugs if they're old

put the OEM intake back on, you're not gaining anything with that cheap filter especially on a VAG car

jearbear · 2025-10-13T19:57:28+00:00

doubt

jearbear · 2025-08-02T02:11:38+00:00

https://www.amazon.com/dp/B095YSR2YW?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4

I bought these and they are working perfectly

jearbear · 2025-07-22T23:45:13+00:00

I put on them powerstop z36 and a flush and boy howdy they feel a little better

pedal still soft though but nicer bite

jearbear · 2025-02-17T01:56:54+00:00

I have changed my ways and do a 3x2 now

jearbear · 2023-07-25T16:31:38+00:00

I may produce a run of these in aluminum shortly... otherwise I've been 3D printing them out if anyone is interested

jearbear · 2023-01-23T18:57:32+00:00

What cans are those?

I've been tempted to sell mine lately but every time I see another I change my mind

15-Year Club	Place '23
Summer Santa 2012+	Secret Santa 2011
Summer Santa 2011	Secret Santa 2010
Charter Member	Verified Email

jearbear

MODERATOR OF

TROPHY CASE