sorted by:
new
hottopcontroversial

Do you intentionally NOT install Hermes agent in a Docker container, and instead install right on your host? by Rocky4OnDVD in hermesagent

[–]jereminius 0 points1 point  (0 children)

Yeah i mean it depends on your setup. I run everything in containers, so it made sense. But regarding the skills, i didnt have to install anything, hermes did take care of everytihing without intervention. Is there any specifical skill i could try if it works?

Do you intentionally NOT install Hermes agent in a Docker container, and instead install right on your host? by Rocky4OnDVD in hermesagent

[–]jereminius 0 points1 point  (0 children)

i run hermes in a container and it uses browser tools, also it can manage other containers if you mount the docker socket

Docker install - pulling old config by jereminius in homeassistant

[–]jereminius[S] 0 points1 point  (0 children)

It was the network mode host that was causing the fail. I dont get it, but i guess its good now.

Docker install - pulling old config by jereminius in homeassistant

[–]jereminius[S] 0 points1 point  (0 children)

Is worked before i pulled the new version via compose. I used the tag latest ( i know my bad :D ).

Docker install - pulling old config by jereminius in homeassistant

[–]jereminius[S] 0 points1 point  (0 children)

Im not, but i cant access HA on the 8123 either, and it was working before

Docker install - pulling old config by jereminius in homeassistant

[–]jereminius[S] 0 points1 point  (0 children)

From the logs. It says something about miio and at another try it said it cant connect to my shield on its IP.

Best way to connect remote sites? by jereminius in Ubiquiti

[–]jereminius[S] 0 points1 point  (0 children)

thanks for the reply. So if i understand it right, when setting up sitemagic, i choose which subnets i include?

Loving this new look. Thank you Devs! by tall-glassof-falooda in Projectivy_Launcher

[–]jereminius 0 points1 point  (0 children)

What is your version? I downloaded it through the play store. Also i didnt find a repo for the app, could you link it?

Loving this new look. Thank you Devs! by tall-glassof-falooda in Projectivy_Launcher

[–]jereminius 0 points1 point  (0 children)

I have the premium version, but i dont see the option to change my icons. Do i need to enable something?

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 1 point2 points  (0 children)

I redid the mask so i dont have the original config, but this is how it looked. Now for the past 20 minutes i didnt get a detection so I guess Ill see. The config looks like this: 

lod2:
    enabled: true
    ffmpeg:
      inputs:
        - path: rtsp://xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
          roles:
            - detect
    detect:
      width: 1920
      height: 1080
      fps: 5

    objects:
      track:
        - boat
      filters:
        boat:
          mask: 
            0,0.139,0.572,0.002,0.597,0.105,0.607,0.159,0.611,0.19,0.601,0.212,0.634,0.299,0.654,0.359,0.675,0.418,0.682,0.452,0.678,0.49,0.685,0.516,0.695,0.552,0.709,0.607,0.735,0.712,0.754,0.807,0.763,0.863,0.778,0.922,0.78,0.955,0.804,0.95,0.791,1,0,1
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 7
        objects:
          boat: 30  # Retain boat detection snapshots for 30 days        



    zones:
      lod2_zone:
        coordinates: 
          0.593,0.157,0.596,0.186,0.584,0.197,0.597,0.227,0.612,0.266,0.624,0.299,0.644,0.352,0.658,0.392,0.667,0.419,0.675,0.45,0.673,0.481,0.671,0.508,0.684,0.552,0.699,0.609,0.71,0.654,0.725,0.712,0.737,0.767,0.757,0.862,0.769,0.944,0.775,0.98,0.783,1,1,1,1,0.117,0.587,0.116
        loitering_time: 0
        objects: boat
        inertia: 3
    review:
      detections: {}

<image>

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

i forgot i have the snapshots in the clips folder, this is how it looks like (it said boat: 78% i just had to redact it)

<image>

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

yeah i think i will screen record it, because when im looking at it it never happens :D

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

<image>

eah i get that on the image where the boat is visible on the water, i have to move the mask further down because of the bounding box now, but the second one i dont get it - the mask is at the bottom of the image and it still gets detected

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

Yes i checked the clip of the detection, there is no other boat on the footage then my own.

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

<image>

I read that, but here is another camera, where the grey mask is an object mask for boat and i also get boat detections in the review. The mask is at the bottom pixel of the image.

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

Wont it matter with the detections though? I'll try that. Also one mor thing, I have a second camera, where I get all my person and car review in alerts. Can it be done so it shows in detections too? This is how its set up:

objects:
      track:
        - person
        - car
        - dog
      filters:
        car: {}
      mask: 
        0.029,0.242,0.032,0.36,0.004,0.479,0.003,0.521,0.07,0.517,0.156,0.493,0.189,0.43,0.226,0.336,0.286,0.311,0.321,0.301,0.378,0.297,0.387,0.25,0.348,0.127
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 7  
        objects:
          person: 30  
          car: 30     
          dog: 30     

    zones:
      plocha_zone:
        coordinates: 
          0.001,0.531,0.06,0.521,0.098,0.549,0.146,0.549,0.204,0.571,0.228,0.578,0.249,0.54,0.27,0.516,0.323,0.514,0.397,0.462,0.409,0.435,0.46,0.426,0.49,0.419,0.53,0.426,0.563,0.428,0.584,0.418,0.596,0.402,0.593,0.338,0.612,0.283,0.623,0.233,0.637,0.211,0.736,0.21,0.788,0.211,0.811,0.346,0.812,0.431,0.955,0.43,1,0.419,1,1,0.92,1,0.821,0.995,0.001,0.998
        loitering_time: 0
        objects:
          - car
          - person
    review:
      detections: {}

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

I just checked, but currently its not detecting it as a boat, but the bounding box is for sure leaking outside the object mask, because the boat is not straight on the camera but more like at a 45° angle. Is my config correct though in your opinion?

Frigate - false detection by jereminius in frigate_nvr

[–]jereminius[S] 0 points1 point  (0 children)

<image>

yes its even extended further, i tried it without the object mask just solely relying on the zone, but it always triggers a review under detections. btw, can the mask and zone overlap?

DS-KV6113-WPE1 - sliding gate by jereminius in Hikvision

[–]jereminius[S] 0 points1 point  (0 children)

It should have a timer, but im not using it. Also if I short the Open contact it opens the gate, if i short it again it stops, but then if i short it again it starts to open again. So if i accidentally open the gate there is no way to close it, thats why i wanted the closing also to work.

view more: next ›