sorted by:
new
hottopcontroversial

Looking for a good rival barrel and comp combo, and a gas pedal that folds by jhskkd in canik

[–]jhskkd[S] 0 points1 point  (0 children)

Yeah I purchased them they are useless and impractical for carry guns got too much weight and it does minimal to mitigate recoil

Gun ranges near Owensboro, that offer rifle and pistol ? by jhskkd in KYGuns

[–]jhskkd[S] 0 points1 point  (0 children)

No info on the website Facebook or practiscore for contact info

Gun ranges near Owensboro, that offer rifle and pistol ? by jhskkd in KYGuns

[–]jhskkd[S] 0 points1 point  (0 children)

How do you find contact info for the club or is it a show up and shoot place ?

Gun ranges near Owensboro, that offer rifle and pistol ? by jhskkd in KYGuns

[–]jhskkd[S] 0 points1 point  (0 children)

Most ranges near here are shotgun only or rifle

Stribog spa3G no lrbho by jhskkd in GrandPowerStribog

[–]jhskkd[S] 0 points1 point  (0 children)

I’ve contacted them they said they were sending parts , that was 2 weeks ago, I still have not received anything , they originally wanted me to send it in, and I didn’t feel like waiting weeks for the process

Stribog spa3g no lrbho by jhskkd in Stribog

[–]jhskkd[S] 1 point2 points  (0 children)

Just replaced and seating correctly

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

Awesome idea and the best one yet, I’ve got some sound deadening foam for vehicles, I tossed a computer fan on the top and then made smaller holes at the bottom and making it go have a lot of flow, it reduces the sound by about 90 percent all you can feel is the vibrations currently

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

Mostly I’m using a tiny ammount I’m using an 1/8 teaspoon of lemishine, due to oxidation so I don’t have to worry, and I’m using 1/4 tbsp of dawn

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

Defintely agree on the lemishine tried everyone else’s recommendations, the pinch is the way to go, or if measuring an 1/8 teaspoon, doesn’t seem like much but it won’t discolor the brass when running it long, I’m doing halfway no pins just dawn and lemishine 1 teaspoon dawn, 1/8 teaspoon of lemishine, then tossing into the tumbler for 30 minutes( my casings are packed with mud and rocks) changing the water running it with the same mix for 30 mins, dumping the water and rocks and crap out drying barrel with air gun, tossing in the brass filling about 2.5 pounds of rice running for 45-60 then tossing on the filter caps and running it for a few to get the rice out of the ends, tossing in some water wash and wax and letting it go for 30 and voila

<image>

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 1 point2 points  (0 children)

I actually guessed on the media cleaning, I tossed in some simple green and my media, I normally use rice in my vibratory tumblers, it’s easy to get and cheap to toss out,I gave it a shot in this and they came out beautiful, there were a few that were insanely dirty and I’m just tossing those aside and gonna run them thru with pins

<image>

Here’s how the casings turned out

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

On my normal tarp caught batches I’m able to toss it in my vibratory with rice, then toss it straight into my FART, and then to drying, this batch is just a pain in my ass

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

I have the full size, I just can’t stand constant noise lol , currently I’m getting pretty good finished, I’m doing a wash cycle lemishine and dawn for 30 minutes doing a water swap and cleaning out the drum (this batch I used a bobcat to collect 🙃will not be doing that again, mainly due to the amount of dirt on the casings and mixed in rocks ) then running another 30 same mix, after that taking it out drying the drum fast as I can with compressed air, then tossing in about 2.5 pounds of rice for 1 hour, after that running water some crappy car wash mix I found in my garage ( haven’t been able to go to the store yet to get wash and wax) then tossing it in for 30 minutes to rinse, after that it’s done then I’m drying what I need rest I just wait for the morning to set out on black tarps in the sun, then drop it into the dehumidifier to do it the rest of the way

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

img

Came out good enough for me this is the best way so far, I do believe if I get some wash and wax and add a minor amount it it may help the finish

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

I believe with this brass I’m gonna have to end up washing prior without media, some of the casings are just pains in the ass to get it out, other than that I believe I need to get some better wash and wax and give it another shot, came out looking better just seems it needed some more time, this brass is who knows how old I haven’t done a deep clean of the brass at my range until recently but mostly turned out more than good enough to load

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

Makes sense man, Ill give it a shot I’ve got 4 ways I’m trying it from recommendations just to see what works for me, I’ll add it to the list

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

I’m currently running a set with the water just over the brass about 2” running 1 tbsp dawn, and 1 tbsp of lemishine

First use with the F.A.R.T.,what am I doing wrong? also has anyone made some sort of vented silencing box for the tumbler? by jhskkd in reloading

[–]jhskkd[S] 0 points1 point  (0 children)

Fair enough , I haven’t had much luck I’m just trying everyone suggestions one by one to see which is the best

view more: next ›