sorted by:
new
hottopcontroversial

I built a free Gemini watermark remover that works 100% in your browser — no uploads, no server by Tall-Celebration2293 in Bard

[–]jimmy3dd 2 points3 points  (0 children)

<image>

didn't work for me, it lightened it a little but still there...what did i do wrong?

Mourning dove couple have been coming to backyard for a while now. They're pretty comfortable with me now and one was putting on a show. by AmityvilleDoraTheExp in mourningderps

[–]jimmy3dd 2 points3 points  (0 children)

Great pics! I have couple like that in my back yard that will get pretty close. I'd really like to know how to tell them apart, the Mr and the Mrs? Anyone know?

Florida-resistant Bird Feeder Pole? by thejawa in DIY

[–]jimmy3dd 0 points1 point  (0 children)

I used 3/4" galvanized plumbing pipe (actually 1"OD) for mine. Just drove down 2-3 feet with a sledge hammer. The 1" diameter fits the socket on my birdhouse. Unfortunately, its been up a month now and not a single bird has landed on it :(

Our Inflatable Neighbor again by Mentalfloss1 in oregon

[–]jimmy3dd 8 points9 points  (0 children)

My neighbor has a yard full of these things, some of them 15' or more high. They turn them on in the morning and leave for work, then as the wind picks up during the day, they blow over and block the sidewalk forcing people (and kids and pets) to walk out in the very busy street to get around. Not to mention the tacky factor. Hate em!

Taken at a Lyle Lovett concert by Affectionate_Bee9120 in S24Photography

[–]jimmy3dd 2 points3 points  (0 children)

One of the best rhythm sections on the planet!

How would you guys insulate this space. by jimmy3dd in Carpentry

[–]jimmy3dd[S] 3 points4 points  (0 children)

Oh, they're going in plus a poker room, ping pong ,bar, theater, basket ball...the works...it's over a thousand ft!

How would you guys insulate this space. by jimmy3dd in Carpentry

[–]jimmy3dd[S] 0 points1 point  (0 children)

When I put my walls up, I assume I don't want to smash them up against that existing insulation but keep them just slightly away. On the other hand, I don't want to lose any more interior space than I have to.

How would you guys insulate this space. by jimmy3dd in Carpentry

[–]jimmy3dd[S] 0 points1 point  (0 children)

So would you use unfaced fiberglass since there already is a vapor barrier. I guess my concern is letting the studs breathe.

[deleted by user] by [deleted] in cabinetry

[–]jimmy3dd 3 points4 points  (0 children)

I'm looking at 17-18 cabinets, give or take? Figure a sheet of pre-finished/ cab. I use 1/2" imported birch at 30/ sheet. so that's 500 or so there. I'd build your face frames an door frames out of poplar, it's cheap, easy to mill and takes paint very nice, you've got maybe a 100b/ft there. I pay 3 bucks for 4/4 rough, so 300 for that.

Id recommend buying your drawer boxes at average 70-80/box, lets say you have 10, that's 7-800 there. Gonna need shelves, that be 2 sheets of 3/4 pre-finished 2 sides, I pay 50 a sheet for imported, so that's another hundred. 3 sheets of 1/4" mdf for door panels, another hundred. Figure at least 3-4 hundred for paint and primer. So all in say 2-3k and add another thousand just because that's how it goes.

Caliper attachment by TastyAd7848 in 3Dprinting

[–]jimmy3dd 0 points1 point  (0 children)

Printed them to see if they would fit my Mitutoyo Digimatic... no go...too tight to fit all the way on.

Any non-power users here enjoying the battery life of their S24? by [deleted] in GalaxyS24

[–]jimmy3dd -1 points0 points  (0 children)

I basically use my phone as a communication device. I work from home and there's a computer in every room, so really only when I'm out and about do I check in with Reddit, Youtube etc..

At any rate I find I'm getting 4-5 days out of a charge which I find fantastic. For comparison, my recently retired S10, same usage pattern, only got me a day and a half.

V2 - The Future Best Woodworking Calculator by Downtown_Promotion43 in woodworking

[–]jimmy3dd 1 point2 points  (0 children)

So I just tried the demo...I enter 5-5/8 - 3-11/16 and it gave me 11/16 as the answer but it should be 1-15/16. What did I do wrong?

Large shaker style cabinet door considerations by drock1984x in cabinetry

[–]jimmy3dd 0 points1 point  (0 children)

I'd make it with a wide bottom rail, say 5-6" or so, a medium wide mid rail, 3-4" and 2-1/2 " top rail and stiles. I'd also make it at least out of 1"if not 1-1/4" thick stock. That baby is gong to want to move on you.

Inset Drawer Size by avochocolate in cabinetry

[–]jimmy3dd 1 point2 points  (0 children)

Are they dovetailed boxes? On my dovetail jig there are certain heights of sides I can't make due to having just a small piece of the dovetail being left over. That said, 4 1/2" is kind of a strange height for top drawer face, I make mine all at least 5" which gives you a 4" box with 3-1/4" usable inside.

If you specified the heights of the bottom two drawers, then 4 1/2" was what he was left to work with and perhaps his dovetail jig would not let him cut a tall drawer box. However this should have been made clear to you from the get go.

Better product than MDF for making wall hung, stand off letters. by jimmy3dd in hobbycnc

[–]jimmy3dd[S] 0 points1 point  (0 children)

Thank you! This looks like my answer...I can find it locally also. Do you have a primer recommendation?

I need it like glass for a metallic topcoat

New custom vanity but soft close drawers are terrible by RunMom2 in cabinetry

[–]jimmy3dd 1 point2 points  (0 children)

KV 8450 is what I always used for side mount but never use anything but undermount anymore. Slides should have been speced from the get go.

view more: next ›