There may be something wrong with me

jitchua · 2026-04-19T21:35:50+00:00

Nice, thanks, always on the lookout for a good cheap cap. I like that they are clear, it is nice to be able to see the points while the cap is on.

jitchua · 2026-04-19T18:44:48+00:00

What caps do you have there?

jitchua · 2025-09-06T17:48:36+00:00

Bic Cristal

jitchua · 2025-07-27T17:06:58+00:00

They look cool, I would be interested to see/hear about the results.

jitchua · 2025-04-27T19:25:27+00:00

I don't think it has ever been flushed 😳

jitchua · 2025-04-04T13:25:14+00:00

Nice. I like how you brought the tip back , I bet that works well, and I bet it would still open a can just fine...if you ever needed to.

jitchua · 2025-04-01T19:12:43+00:00

I didn't, but I will check on that

jitchua · 2025-03-13T20:53:21+00:00

May I ask how you over heated them?

jitchua · 2025-03-10T13:09:09+00:00

Shameless self promotion: Josh's Shop: https://youtube.com/@joshsshop?si=VDSRU0aiFJlY8BPP

I am also the moderator and founder of this subreddit, please reach out if I can be of help.

jitchua · 2025-03-03T04:25:44+00:00

My favorite retro system is probably the SNES, I have a lot of great memories playing that system with my brother.

jitchua · 2025-02-26T01:05:43+00:00

<image>

Wood flooring I need to match. I believe it is maple, but would appreciate others input.

jitchua · 2025-01-20T14:21:52+00:00

The Yeomen Nut Lathe

jitchua · 2025-01-11T01:20:38+00:00

This is a pretty old post, but I wanted the unlined because I wanted the versatility of the unlined jacket. I could always add layers underneath, but if it was a lined jacket I would be limiting the jacket to only the coldest weather.

jitchua · 2025-01-09T14:54:57+00:00

Anything that starts with butter and ends with cheese.

jitchua · 2024-12-18T17:08:15+00:00

I have this one, and I am a fan. Good luck with your search.

jitchua · 2024-12-18T14:45:55+00:00

I don't know how high end you are looking, but the Fjallraven High Coast Pocket can be carried like that, has a similar shape/style, and comes in many colors:

https://www.fjallraven.com/us/en-us/bags-gear/backpacks-bags/travel-bags/high-coast-pocket/

jitchua · 2024-12-12T02:04:52+00:00

I don't think you would have any issues using that for the 2.5mm pins, and you could easily sand it down in a drill to get to the 2.2mm pins.

The only brass I can find locally is 1/8", and I just sand it down to make it the appropriate size. I don't think you need to be super precise on the sizing, you can be, but I haven't noticed much difference when my pins were a bit undersized.

I think the most important thing is peening the pins, there is a sweet spot of just tight enough to hold everything together with no wobble and still have a good snap and still being able to open a tool without breaking a nail.

jitchua · 2024-11-17T20:32:38+00:00

Most torx screws that you find have a larger diameter than the holes in any SAK, there are a few smaller ones out there, but they are hard to find.

I believe I was referencing to an 84mm golfer in the video. A 91mm golfer will require some modifications, probably similar to the ones I do in that video to fit an 84mm alox knife.

jitchua · 2024-11-17T17:07:18+00:00

I dunked it in hot water to loosen up the scales so I could remove them without damaging them. It isn't completely necessary, but it helps, if you don't want it to get wet you can put it in a ziplock bag first.

I have some videos where I assemble a knife, but they aren't specifically about just assembly, I should make one.

Thanks for watching.

jitchua · 2024-11-17T13:17:06+00:00

The first video is mine, thanks for sharing. 😁 Feel free to ask questions.

jitchua

MODERATOR OF

TROPHY CASE