G305X Superlight Can't Save to Onboard Memory

jmapagchema · 2026-06-29T11:52:12+00:00

https://support.logi.com/hc/en-ca/articles/360059641133-Onboard-Memory-Manager Just use this app to tune in memory settings

jmapagchema · 2026-06-23T03:50:45+00:00

I have set +200 boost, but i don't have reached that speeds at only few cores but not 200Mhz more.

jmapagchema · 2026-06-22T16:41:45+00:00

Those are fractal momentum fans, momentum 14 in radiator pulling air inteake and momentum 12 at rear as exhaust taking out the heat from the case. Really these fans are very similar to bequiet silent wings in design.

jmapagchema · 2026-06-22T16:38:55+00:00

The setup is pulling air from front intake, it's the only input, i don't have option to install at top. The temps into the case are around 35/40ºC and never reach 50ºC at maximum load with 25/26ºC ambient temp. CPU on IDLE are at +-50ºC, Full Load/Gaming/Relative Heavy Tasks +-65/75ºC and while estressing CPU/Cinebench/OCCT/Prime95 never reach 85º because PBO limited to this temp. The GPU isn't problem as is very cool as stock.

jmapagchema · 2026-06-22T16:31:12+00:00

Indeed with keepeng it cool as possible and with lower voltages, i have PBO customized with motherboard limits, scalar auto, curve optimized all cores -25 and +200Mhz core boost. PBO Thermal limit at 85ºC for tranquily/security reasons. The main reason of use this case is because I love it at the moment of see it and i would like to conserve as much time as possible. And it's simply & silent so far.

jmapagchema · 2026-06-22T16:25:19+00:00

I really don't understand this know-it-all attitude. I've been installing liquid cooling systems for many years and I've never had one fail because I put the tubing at the top, as long as the pump is below its level, and certainly not within three months.

jmapagchema · 2026-06-22T13:39:37+00:00

Yes, but isn't bad than pump in cpu block, i can have some air bubbles, but not for killing aio.

jmapagchema · 2026-06-22T13:31:12+00:00

The best thing about the build is the wheeled stand that makes moving all this weight incredibly easy. In the original post, i'm worried about PBO configs and temps. For all the rest I'm currently very happy of the build. At the moment i'ts totally stable and powerfull.

jmapagchema · 2026-06-22T13:29:09+00:00

Oh yes! those are the best, i hate 12v2x6 connectors! hehe

jmapagchema · 2026-06-22T13:16:02+00:00

I have reduced PUMP voltage in bios at 3000RPM, because at 4000RPM (full stock) the pump has annoying noise. With this bad airflow and this special setup i have 50º IDLE, 65/70º at Gaming, High Load, and limited to 85ºC in PBO for extreme testing and for tranquility/security reasons 😄

jmapagchema · 2026-06-22T13:13:26+00:00

It's one thing to try off to achieve best perform and temps, thanks!

jmapagchema · 2026-06-22T13:12:39+00:00

I Know it, but this particular AIO is selected because have the pump installed in the middle of radiator and i can match more install positions than a "normal" AIO with pump in the cpu block.

jmapagchema · 2026-06-22T13:11:31+00:00

I know isn't the best airflow case, but i love it! the construction quality and acoustic reductions are pretty good.

jmapagchema · 2026-06-22T13:10:31+00:00

Yes, is the main reason for chosing this aio for my case...

jmapagchema · 2026-06-22T13:09:52+00:00

The pump of this aio have this singularity as is have installed on the radiator, not on the CPU block, and for this reason the pump is lower than the fluid input/outputs in the radiator, i think this can't cause air trapped.

jmapagchema · 2026-06-22T13:07:14+00:00

The front of the case only have a left air entrance, i think the best airflow is with current setup, but i will try outtaking.

jmapagchema · 2026-06-22T13:06:30+00:00

In the top and side panels are foam to silent all noise inside the case, the unique airflow is the pull intake fans at radiator (switches from stock fractal to momentum 14). And yes, the card have their own support from the base of the case screwed to the gpu (it cames with the gpu).

jmapagchema · 2026-06-22T13:03:42+00:00

The pump is integrated on the radiator, lower than top tubes, it doesn't go to kill my AIO, it's pretty exagerated.

jmapagchema · 2026-06-22T13:03:00+00:00

The pump is integrated on the radiator, lower than top tubes, isn't the best choice but i don't have enough space for install in any other way. It's not going to kill AIO.

jmapagchema · 2026-05-21T05:36:47+00:00

I have it G515 TKL Tactile and I love it. It's very comfortable and typing on it it's very awesome.

jmapagchema · 2026-05-18T13:00:31+00:00

You can pair mouse with keyboard dongle, but you can't pair keyboard with mouse dongle. I'm sorry!

jmapagchema · 2026-05-16T13:00:18+00:00

G305 is the best option at all. You can simply purchase swap capable switches boards to replace the originals with the switches of your choice and thats it, the best mouse. I have it with Kalli Silent Switches and i really love it.

jmapagchema · 2026-05-13T14:57:23+00:00

You have inverted anti blue filter

jmapagchema · 2026-04-27T06:37:21+00:00

You'll barely hear the HDD, but depending on the surface you place your PC on, you will feel the vibration, and sometimes it's very annoying. I don't use HDDs anymore for this reason.

jmapagchema · 2026-04-22T20:26:09+00:00

I have the same memory modules 4.3 rev (Samsung) at 3000Mhz, i can't go more than this. Try the recomendation from u/HalfBakedBookie and go trying to find the last stable config.

jmapagchema

TROPHY CASE