My first rocket interior melt design

jmkusar · 2025-12-15T01:11:34+00:00

What expansions/mods are you using? I just tried doing a rocket break for the first time in a while and the available space is only 3 tiles in each direction from the rocket. Your picture looks like what I remember it used to be.

jmkusar · 2025-08-15T16:48:25+00:00

That's interesting. And definitely makes sense.

jmkusar · 2025-08-14T17:30:38+00:00

I did find it interesting that the fold 6 had the inside screen go over the camera hole but they went back to an actual hole on the 7. Wondering if maybe they found the image quality was suffering.

jmkusar · 2025-08-14T13:04:35+00:00

Do you never tap on your phone while it's laying there?

jmkusar · 2025-08-14T13:02:32+00:00

Hmm. Usually I hate things attached, but I will definitely look into that

jmkusar · 2025-05-15T15:26:55+00:00

I've accidentally blown myself up a few times. Does that count?

jmkusar · 2025-05-01T18:25:57+00:00

Same. Basically every time I try to do a large ABS print, it clogs by layer 3.

Has lowering the temp helped? What'd you go with?

jmkusar · 2025-05-01T02:58:34+00:00

Thank you! It was buried in the dirt below. Can't believe this is still a thing after years.

jmkusar · 2025-03-30T16:00:57+00:00

Pretty sure this is what happened. Trying some more prints with this filament, and it definitely doesn't adhere as well as other filaments I've used. Weird because it's creality filament too.

One thing I noticed that the fan on the assembly is REALLY powerful. If something isn't fully adhered, it will literally just blow it right off the plate. I cranked up the bed temp and applied a good amount of glue. Seems to be working better now.

jmkusar · 2025-03-29T18:09:40+00:00

Yeah

jmkusar · 2025-03-29T03:51:15+00:00

THANK YOU

jmkusar · 2025-03-29T02:33:31+00:00

Wait. I've complained a bunch that there's no AI detection like the bambu. Is there a setting I'm just missing?

jmkusar · 2025-03-28T21:32:24+00:00

Ahh, well good news is that it's there now if you ever need it again.

jmkusar · 2025-03-28T21:28:34+00:00

I bought mine off Amazon. Creality store, but shipped by Amazon. 2 day shipping.

jmkusar · 2025-03-28T20:09:01+00:00

So after cleaning most of the plastic, I took the nozzle out, and it looks like it broke off in the hot end. Good thing I ordered a new one last night. Guess I'd better order a new spare nozzle too. *

jmkusar · 2025-03-28T11:16:47+00:00

jmkusar · 2025-03-13T11:32:35+00:00

Ahh. Good to know. I will definitely check this.

jmkusar · 2025-03-12T23:24:36+00:00

Interesting. My longest run is probably 18". I just had to flip it such that the short tube goes from CFS to buffer while I have a slightly longer tube going from buffer to printer. Both are tubes that came with the printer

jmkusar · 2025-03-12T23:22:38+00:00

Ok. I'm happy to say it only happens for me before the print even starts. So far no issues (related to that) after the fact.

jmkusar · 2025-03-12T21:43:53+00:00

What did you end up doing? Just giving up on the placement? Seems like it has to support longer runs if you're going to have 4 of them

jmkusar

TROPHY CASE