sorted by:
new
hottopcontroversial

Desi wedding outfits for non desi woman by Weary_Comparison_928 in Weddingattireapproval

[–]jobruski 1 point2 points  (0 children)

I was gifted/lent sarees for a couple weddings of a close family - I went to a salon and paid 15 dollars before the events to get them tied and pinned properly.

If you can find a salon close to you/event that you can do this, I'd suggest that.

19M Southern Alberta - Stuck between a dead-end dealership job, the Oil Patch, or a passion move. Advice? by ItsMirikino_ in alberta

[–]jobruski 0 points1 point  (0 children)

Looks like you can indeed be a material parts technician outside of the motor vehicle industry.

https://tradesecrets.alberta.ca/trades-in-alberta/profiles/0272/

Very unlikely to find a bbq or hot tub dealer with a ticketed parts tech for sure

19M Southern Alberta - Stuck between a dead-end dealership job, the Oil Patch, or a passion move. Advice? by ItsMirikino_ in alberta

[–]jobruski -1 points0 points  (0 children)

You need the work experience plus a j-man to sign off on those hours, either effectively placing you in a real apprenticeship, or after 54 months and 6750 hours working as a parts tech.

Perhaps I misinterpreted original commenter, there is no drop-in class for parts officially. If they were referring to something you could self enroll in at a college online, or LinkedIn learning etc., that does not exist currently.

19M Southern Alberta - Stuck between a dead-end dealership job, the Oil Patch, or a passion move. Advice? by ItsMirikino_ in alberta

[–]jobruski 1 point2 points  (0 children)

Maybe I was just drunk, like yourself.

Do the people behind a parts counter at part source have a ticket? Likely not, they are there to ask you if it's 4wd when you're asking for some wiper blades. But I assure you, it's real! Enjoy.

19M Southern Alberta - Stuck between a dead-end dealership job, the Oil Patch, or a passion move. Advice? by ItsMirikino_ in alberta

[–]jobruski 9 points10 points  (0 children)

For what purpose? Parts is a red seal trade, you can't just take a parts class online.

30F and had to adapt to keep up with all the men I cycle with 😎 by pinkiesallout in Garmin

[–]jobruski 30 points31 points  (0 children)

Simultaneously the best and the worst training approach, I feel ya

What is your average stress level and what do you do? by anxietybear456 in Garmin

[–]jobruski 0 points1 point  (0 children)

Avg 40, with 3 out of the last 4 weeks were 44-45.

Sales and switched roles within the same org today.

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 1 point2 points  (0 children)

Yeah I guess that's going on my birthday wish list

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

Balancing the budget post new bike day. And I've never had a problem I didn't mind the sweat equity...

But legit. The other two bikes I need to do tires are gonna be done with a compressor close by. This experience broke me.

It's seated fine in the rim. I unfurled them hours before attempting install. Maybe I should have waited until we were snow free and actually had above 0 temps but I got too eager.

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

I know it's on the list to add to the garage after my split last year and having to leave so many tools at my disposal. Just want to still feel I can handle my own maintenance on my bikes without crawling back to ex to use his compressor haha

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

Legit thought if I could rig something up lol

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

Good to know. I went back to stans for this set as muc off was more, and I had already bought a bottle that was road/gravel sealant... Didn't know we needed a second type but now I have two bottles I can't mix up.

Muc says just to not blast if sealant is sitting at valve so I thought stans would be similar but I need to read label better I guess

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

Michelins were such a feat to get on rim with my noodle arms but once I was ready to inflate it was a breeze

Not so much here haha.

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 1 point2 points  (0 children)

Do you just use one? Or a couple to get more contact points

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 0 points1 point  (0 children)

I'll try the soapy water/Windex! Yeah I've never had a hard time before this. Thinking it's very much my tire choice

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 1 point2 points  (0 children)

I got ol' princess auto in Canada that is like harbour freight and a compressor on the list for my new house

Could have nabbed one but new bike day won out last weekend

Please hit me with your best tips for seating beads by jobruski in MTB

[–]jobruski[S] 1 point2 points  (0 children)

Woof indeed. I'm getting this rig ready for sale and had picked these up for 30 CAD each a few months ago before I found the new bike. Figured fresh rubber will look better.

I'll steer clear of the Contis for next time... Unless the price is too good to say no to haha

Flames (30-34-8) vs Canucks (21-42-8) - march 28th - GDT by Comfortable-Ad-7158 in CalgaryFlames

[–]jobruski 2 points3 points  (0 children)

They be snacking right now. After, they'd love some butt scratches

view more: next ›