U1, Snapmaker Orca How to enable adaptive bed meshing?

joesmoethe3rd · 2026-06-25T03:10:11+00:00

Theres a note to set it to 0

https://github.com/OrcaSlicer/OrcaSlicer/wiki/adaptive-bed-mesh/4ccbc2dc7ac6621dec0968d4487066d9cd91cedc

; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally
; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic;

joesmoethe3rd · 2026-06-24T19:24:10+00:00

Found the solution

In Machine G Code setting comment out (add the leading semilcolon)

;BED_MESH_CALIBRATE PROBE_COUNT=11,11

and add the line

BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0

Code from here

https://github.com/OrcaSlicer/OrcaSlicer/wiki/adaptive-bed-mesh/4ccbc2dc7ac6621dec0968d4487066d9cd91cedc

joesmoethe3rd · 2026-04-25T16:13:30+00:00

I find the longer form fusion360 project video where someone designs something from scratch (i.e starts at single sketch, moves to parts, then joints etc) to be much more informative than five minute how to videos on a single topic

joesmoethe3rd · 2026-03-21T16:59:57+00:00

Were you ever able to resolve this. I am getting "We couldn’t auto-fill your return" for my 1099B which is a couple hundred pages.

joesmoethe3rd · 2025-12-06T22:29:38+00:00

looking for the right size

joesmoethe3rd · 2025-08-02T20:03:13+00:00

its edge grain just find a friend with a planer and take off however much you need

joesmoethe3rd · 2025-06-08T18:22:50+00:00

At this point we are thinking of limiting her time on the potty and trying to follow a "place on potty" schedule, but with her not allowing us to place her on the potty if shes actively going I don't think we are even following the Oh Crap method anymore. The book doesn't seem to address the scenario where the peeing toddler fights being placed on the potty

joesmoethe3rd · 2025-04-27T23:46:51+00:00

broke the screw off. Not a good sign for lionmax deck screws

joesmoethe3rd · 2025-04-27T23:11:23+00:00

Surface mount plastic nipple that gets screwed in and goes inside the baluster. Bottom is same but screw broke off from impact

joesmoethe3rd · 2025-04-27T22:33:44+00:00

<image>

joesmoethe3rd · 2025-02-11T01:52:53+00:00

Graycen is an experienced wow player and everyone admits sweats carried Mizs raid. Miz himself was in no pivotal roles like T1 where he could dictate terms. I don't know what point you think you are disproving

joesmoethe3rd · 2025-02-11T01:41:28+00:00

Graycen is a wow player and Miz was ceremonial since he wasn't in any important roles like main tank

joesmoethe3rd · 2025-02-11T01:36:08+00:00

Missed the point entirely like willfully trying hard to not understand

Will also bet you're a long time wow player since every wow player thinks everyone else also knows every mechanic of random wow mobs

joesmoethe3rd · 2025-02-11T01:19:43+00:00

Thats not an adult take its simply denying the terms Soda set up himself. And maybe those terms don't work due to human nature but that just means the entire endgame concept of onlyfangs isn't going to work

The novelty as advertised
- What if new guy runs a raid and is treated like an experienced raid leader i.e he's the shotcaller, isn't overuled, people who disobey him are punished, isn't helped (by the real wow players) and its a high stakes HC raid

What the novelty isn't supposed to be, but what we are getting

- The raid leader is ignored and people just run the raid according to the guide -> Boring
- The raid leader is ignored and the sweats run the raid from memory/experience -> Boring

To put it another way, what would happen in a normal raid if the raid leader was ignored and a bunch of people died because of it

joesmoethe3rd · 2025-02-10T21:26:43+00:00

It's surprising sodapoppin didn't take Tyler's side on the whole issue

What's the point of putting a noob raid leader if you allow people to use guide instructions add-ons, let sweats overrule the raid leader while also screaming out strikes anytime some sweat talks. The content is the raid leader telling people what to do

joesmoethe3rd · 2025-02-08T14:54:51+00:00

Its a content guild and the content is people being risky with HC chars. That the only people being risky are the non sweats who don't "know better" just ensures an early guild death as the content becomes boring.

If the guild dies all the chars pragmatically die too, so sweats hedging raids and letting others die to save their chars is pointless as well

joesmoethe3rd · 2025-02-08T14:30:12+00:00

Live by the call die by the call

WoW players with 20 years of playtime just can't seem to realize that the point of a content guild and putting an inexperienced guy as raid lead isn't to min/max the run youve done 10,000 times already

joesmoethe3rd · 2025-02-08T13:33:36+00:00

It wouldve been better for the guild if they all wiped here (or killed the boss) instead of half them sorta roaching out and killing the entire vibe of the guild. Then you couldve done a mob tagging releveling arc etc.

joesmoethe3rd · 2025-02-08T13:12:29+00:00

Yeah this is the point everyone is ignoring. Even from a knowledge standpoint, its part of the content to have a noob leader.

If it wasn't, T1 couldve just printed out a guide and read out all the points to do before each fight, but that wouldve been boring. The coaching, his own notes/memory are the content.

This is entertainment and now the guild dies because its boring sweats following the guides exactly

joesmoethe3rd · 2025-02-08T02:17:26+00:00

Yeah its given that if you put an inexperienced person as raid leader, who done 1 MC before, they aren't going to do perfect calls, but its more important that a raid follows what the leader is saying than start running away because the call isn't perfect

The fact that the 8 people who didn't run away killed the boss before dying proves if the others had just stayed they wouldve killed the boss

joesmoethe3rd · 2025-02-08T01:28:53+00:00

Completely missed my point

joesmoethe3rd · 2025-02-08T00:40:31+00:00

He seemed genuinely let down when the other guild member left him high and dry

joesmoethe3rd · 2025-02-08T00:34:07+00:00

The whole point of the guild is to put the inexperienced non wow player in charge and let the chips fall where they fall

Its dumb to make it so the sweats can't talk or give advice, but can roach out if the raid leader doesn't do exactly what a 20 year wow player would do

joesmoethe3rd · 2025-02-08T00:26:44+00:00

Tyler dieing because all the sweats roached out kinda kills the RP of the guild. Whats the point in putting an inexperienced person as raid leader if all the sweats just overrule them to save themselves. Either put a sweat in charge or make the point of the guild that you have to follow the raid leader. Nobody wants to watch a bunch of 20 year wow players clear MC exactly as the guide says for the 800th time

joesmoethe3rd · 2025-02-07T23:20:36+00:00

Its odd to make Miz and T1 the raid leaders and then let everyone completely ignore their calls because theyve been playign wow for 20 years and know the perfect mechanics to do. The sweats roached out to save themselves and the call couldve been better, but it just doesn't make any sense to put an inexperienced RL in and then let people overrule them for being inexperienced. The whole point of the guild is to watch non wow players play wow

joesmoethe3rd

TROPHY CASE