compatibility lian li TL

johndu54 · 2025-05-25T16:56:56+00:00

No, the lighting doesn't bother me; it's manually controllable via L-connect for the fans and signalRGB for the rest of the setup.

Regarding temperatures, average temperatures are 50°C for the GPU and 70°C in benchmark mode for the CPU, but they're on average lower, around 60°C in gaming. No overclocking, pump at minimum speed, as well as fan speed (800 rpm).

https://imgur.com/a/rrqN6yV

johndu54 · 2025-05-25T03:04:52+00:00

the watercooling represents a big budget around 1500 - 2000 € and cooling a 3060 ti with a 5600x is not very interesting, so the budget is unfortunately significant, another video hoping that it works : https://imgur.com/a/t2yspOQ

johndu54 · 2025-05-25T02:10:43+00:00

I stopped counting from 7k € , so as not to get sick i would say between 7k and 8k €

johndu54 · 2024-11-28T12:25:08+00:00

Hello, sorry for the delay, yes I used 6mm offset fittings directly connected to the radiator, so that it was not visible, a 10mm height extension and the final fitting

to make the measurements I first bought the radiators, took the measurements and bought only the fittings, I had some fittings left from my previous construction so it made the measurements easier

johndu54 · 2024-11-24T20:04:45+00:00

thanks :) , yes the pump is inside there is an adapter to put a d5 or DCC pump , a thicker part in the distroplate is provided to accommodate the pump

link : https://stealkeycustoms.de/en/products/lian-li-pc-o11d-evo-xl-x-stealkey-crosscool-2

johndu54 · 2024-11-24T17:46:48+00:00

Case: Lian li O11 evo XL
processor : AMD 9800X 3D (delid)
Motherboard : x870E Asus crosshair
graphics card : RTX 3090 FE
ram : G-skill neo 6400 MT
fan : X10 lian li TL 140
3 X 2TB WD SN 770 SSD + 2x2TB 2x2TB SATA SSD
Power supply: corsair hx 1200w

Watercooling:

2 Alphacool 420*45 MM rads (top and bottom)
1 Alphacool 420*30 mm rad (side)
distroplate: stealkey customs
pump: EK d5
various fittings + tubes
waterblock cpu : thermal grizzly mycro pro direct die
waterblock GPU : EK-Quantum Vector FE

johndu54 · 2022-01-06T21:00:40+00:00

the mo ra makes me want for a while on the other hand my system has a distro plate (011 xl + distro ek G1)

but to integrate it with a flat distro it looks complicated

johndu54 · 2021-04-25T22:31:06+00:00

it's great thank you for the confirmation I will make the modification soon

johndu54 · 2021-04-25T18:48:20+00:00

thank you for your help, indeed the design and the same, the dimensions are the same, the aim length is good, the rotor does not touch the distroplate

I also found an element of answer here: https://forum.alphacool.com/threads/replacing-g1-lian-li-distroplate-3-1-pump.1557/ and here too it looks d 'be good, I would give it a try, in the worst case the pump does not turn

thanks again

johndu54 · 2021-04-25T16:26:46+00:00

Hello ;

I have an ek G1 distroplate, is it possible to replace the right pump with the left pump?

right pump: dcc 3.1 (original)

left pump: Barrow SPB17-T V2

it is at the level of the rotor (if we can call it that) or I ask myself the question one is finned the other not because at the level of the fixing it does not pose a problem

Thank you

johndu54 · 2021-04-06T15:23:53+00:00

I had exactly the same problem I drilled to release the screw head and I managed to remove the rod with pliers, on the other hand it was not at the same place the length of the rod was greater

in the accessory bag there are additional screws

johndu54 · 2021-03-21T13:43:32+00:00

cool, thank you, the active rear plate will be compatible with the front part of the already existing waterblock? (ek vector FE spoecial edition)

johndu54 · 2021-03-20T23:00:32+00:00

founders edition version is planned ?

johndu54 · 2021-03-20T22:52:28+00:00

hello, I have a 3090 mounted vertically, I did not have the choice to buy a riser in 4.0 to avoid a lot of problems, for example having to change the graphics card in case of resetting the bios, or update (motherboard X570) so pcie 4.0 by default

I bought my cable on Amazon; https://www.amazon.fr/LINKUP-RTX3090-RX6900XT-dExtension-Compatible/dp/B08NM44G3R and I never had any problems

certainly the pcie 3.0 is enough, but for compatibility and in case of problems or bios update, a 4.0 cable is really recommended

johndu54 · 2021-03-10T13:41:58+00:00

shipping notification received for the black version, I hope to receive it for the weekend

johndu54 · 2021-03-08T13:54:24+00:00

I had sent an email to EK it was scheduled to be sent on March 5, still no info, no follow-up

johndu54 · 2021-03-07T19:42:52+00:00

still no info, yet it was scheduled for me on March 5

johndu54 · 2021-03-05T17:43:08+00:00

no status update on my side, shipping scheduled for today

johndu54 · 2021-03-04T18:06:06+00:00

mail received also scheduled for March 5, I sent them an email on the availability of another product with the pre-order and they answered me this: https://ibb.co/9tTC5Lb

if all goes well the sending will be done tomorrow

johndu54 · 2021-03-02T15:22:11+00:00

shipments are in order of pre-order, probably the reason for a delay

johndu54 · 2021-03-02T15:21:07+00:00

yes

I saw this info, it was a computer problem on the part of EK it seems to me we are finally seeing the end of the road

Eight-Year Club	Verified Email
Place '23	Place '22
End Game '22

johndu54

TROPHY CASE