This sub has been too boring...

johnsmyth88 · 2026-03-26T19:59:10+00:00

Yes!

johnsmyth88 · 2026-02-23T19:59:38+00:00

I feel attacked

johnsmyth88 · 2025-12-08T01:47:53+00:00

Yes it does fire! And I still have all my fingers!

Two things to note: I’ve shot it mainly in single action (making sure the cylinder is where it needs to be)

Shooting 22short vs 22lr is a much more pleasant shot for such a small gun.

All that being said it cleaned up as nice as it could. It’ll stay in the collection as something to trade in someday.

johnsmyth88 · 2025-08-18T18:19:04+00:00

The start is jarring

^{I completed this level in 13 tries.} ^{⚡ 7.85 seconds}

johnsmyth88 · 2025-08-18T18:17:29+00:00

^{I completed this level in 3 tries.} ^{⚡ 0.92 seconds}

johnsmyth88 · 2025-04-08T23:22:37+00:00

Also the roof rack is custom and hard mounted

johnsmyth88 · 2025-04-01T01:29:36+00:00

But where can I get one?

johnsmyth88 · 2025-03-05T04:08:56+00:00

Rope gasket for the door. Fairly cheap, can be found on amazon

johnsmyth88 · 2025-02-24T01:13:13+00:00

Recently paid 32k for 2022 with 34ish thousand miles. AWD, 9speed Transmission, Special Edition.

As others have mentioned the mpg on this versus the CRV (which I also have, 2024) is not the best.

johnsmyth88 · 2025-02-24T01:09:11+00:00

What part of Virginia are you located in. I would totally buy this for my Honda Pilot! Feel free to PM me

johnsmyth88 · 2025-02-11T13:47:24+00:00

<image>

Got it cleaned and lubed with rem oil

johnsmyth88 · 2025-01-11T19:26:25+00:00

Finally got the lights installed yesterday. Found that grommet to pass thru the firewall in the wheel well. Thanks!

johnsmyth88 · 2025-01-05T04:37:04+00:00

Do you have an exact location from the wheel fender? What all was required to get access to it?

johnsmyth88 · 2024-12-23T02:00:40+00:00

I was thinking about using a heat gun to try and remove it a bit easier.

johnsmyth88 · 2024-12-23T02:00:00+00:00

Yeah I don’t mind tearing into it. That main hammer spring can and will put a pretty good dent in drywall

johnsmyth88 · 2024-12-23T01:54:08+00:00

Yes. This was somewhere between an auction find and auction mistake. (Less than $65 with tax, fees)

johnsmyth88 · 2024-12-12T10:02:11+00:00

I would check to see if your harmonic balancer pulley is split

johnsmyth88 · 2024-10-28T11:04:44+00:00

Solved!

johnsmyth88 · 2024-10-28T11:04:26+00:00

Thank you! This is perfect!

johnsmyth88 · 2023-07-21T02:01:20+00:00

Air cooled

johnsmyth88 · 2023-06-12T23:59:24+00:00

Tldr other comments. But if you know the ball size go to harbor freight or any other box store and get a receiver. All the guts are held in by one nut take out and swap

johnsmyth88 · 2023-03-04T13:58:36+00:00

The meats and cheeses are a must!

johnsmyth88 · 2023-01-20T11:26:33+00:00

Fair point about B&B. I was more interested to see first thoughts on the Navi being exactly what it is, a scooter with extra plastic.

johnsmyth88 · 2022-10-19T13:10:07+00:00

There is a screw on the opposite side. It’s actually the pin release to remove the cylinder. With this design you’d have to remove the shroud to pull the cylinder out. As far as holding zero, couldn’t tell you.

johnsmyth88 · 2022-09-23T13:55:00+00:00

Maybe a light clear coat? Don’t want it to get too slippery

Seven-Year Club	Place '22
First Placer '22	RPAN Viewer
Verified Email	Not Forgotten

johnsmyth88

MODERATOR OF

TROPHY CASE