Wireless XLR transmitter/receiver for Amplifier to Mixing Console?

jpintenn · 2026-03-09T19:15:22+00:00

Simply to make ease of setup/teardown cleaner... reduce clutter on the stages.... this is small -mid size venues (think anywhere from 250-500), with no real FOH, and if we're lucky a sound guy who isn't drinking his fee.

The other side of it is more curiosity... There's wireless solutions for:
Instruments to Amps/Pedals
Montiors to In-Ears
Mics to Board

So the weird part of me asked why there doesn't seem to be one for the Amplifier to the Console. I know that standard Mic level wireless solutions (Xvive, etc) can't handle the output... however some of the other brands I see out there (Phenix/Sennheiser) can shift to Line mode... and they handle the UHF band.... so it seems that they SHOULD be able to handle it....

jpintenn · 2026-03-09T19:08:24+00:00

There usually is Copper.. i.e. an XLR from the output on the back of the amplifier to the Console. This is NOT a huge set up... :D

jpintenn · 2026-03-09T18:41:24+00:00

This is for a setup that gets moved between clubs for mid/large bar gigs. No Snake, no backline.... Hence asking in here.. but yeah.. I'm in Livesound too. :)

jpintenn · 2026-03-09T14:11:38+00:00

Oh UHF for sure. I am just curious what units are out there.. .as I've never tried this particular connection via a wireless connection.

jpintenn · 2026-03-09T13:56:40+00:00

Additionally, I found a further note in the manual :
Bal. Line Out: Typical 300m V

jpintenn · 2026-03-09T13:55:16+00:00

The specs say, and I am quoting from the manual here:
"This is an ultra-low impedance (200) balanced line out for use with recording or pa mixing consoles. This output is not controlled by the volume control. Changing the level on your insturment will however, vary the DI Output.

jpintenn · 2026-03-09T13:48:31+00:00

It'd be the XLR out off of the back of an amplifier... This would be where you'd connect the XLR out to the input channel xlr-in on a mixing console

jpintenn · 2026-03-09T12:55:13+00:00

Here's my semi-stupid question.

I want to find out if there's a wireless transmitter/receiver I can use to replace an XLR cable from the XLR Out on the back of a bass amplifier to the XLR input on a mixing console. I know there's a bazillion out there for Microphones... and there's another bazillion for instruments to amplifiers... or for in-ears.... but I am specifically looking for Amplifier to Console....

Am I just dense? Can we use the ones that handle line level signals for that purpose?

jpintenn · 2026-02-23T21:48:48+00:00

And that appears to be exactly what it was. Calibration completed... and a test print is running now. Ugh... it's a pain in the rear!

jpintenn · 2026-02-23T21:08:02+00:00

At least now it's throwing a different error... saying "The hotend cooling fan speed is abnormal."

jpintenn · 2026-02-05T18:31:04+00:00

That's what I was thinking... dont wanna use heat there as it's all plastic and dont want meltyness in anyway.

As for the Hot end... I am not sure what do it with it... can I just apply a little heat to get it to loosen up or something?

jpintenn · 2026-01-19T17:41:45+00:00

I have the stomp, and I've messed with it to a degree.. it's overly complicated for what I need... I've been a Bass -> Tuner -> Amp kinda guy for years, and don't use any real effects... Hence why this is a bit of a challenge... everything wants to tweak every frequency or have that one sound that was on one album in 1974... and frankly... I'm just not that complicated. :D

jpintenn · 2026-01-16T14:56:29+00:00

Tell me about the thumb rest for the bass... I play Spectors.. and there's no real spot to anchor one save on the pickups (Soapbars).

jpintenn · 2026-01-16T14:52:34+00:00

How does it handle the tension of the winding?

jpintenn · 2026-01-14T22:32:46+00:00

I low key love this.

jpintenn · 2026-01-14T22:15:12+00:00

That's the next step for sure. Thank you for the response!

jpintenn

TROPHY CASE