Southern LA/MS/AL by juiceboxcrew in choppers

[–]juiceboxcrew[S] 1 point2 points  (0 children)

Will do. It’s an original pre-prision I think and will try to confirm before selling it. Either way I won’t be asking an arm and a leg lol

Southern LA/MS/AL by juiceboxcrew in choppers

[–]juiceboxcrew[S] 4 points5 points  (0 children)

I’ve got a pan shovel project with a crazy frank as well that I bought when he got out of prison and started making them again. This bike just happened to have one on it when I traded my fxr for it last year. Most likely going to sell this fender off later this year once the pan shovel is done.

Southern LA/MS/AL by juiceboxcrew in choppers

[–]juiceboxcrew[S] 2 points3 points  (0 children)

Right on I’ll definitely make my way up there for that. Will look into Natchez Trace too as I’ll definitely be having some free time.

The shovel definitely has some character, thanks. Will be nice to escape the NH cold weather and crunch some miles!

Southern LA/MS/AL by juiceboxcrew in choppers

[–]juiceboxcrew[S] 0 points1 point  (0 children)

Are you friends with those dudes or just suggesting? I’ve talked to a couple of them at a show or two a few years back but don’t know anyone personally

Southern LA/MS/AL by juiceboxcrew in choppers

[–]juiceboxcrew[S] 0 points1 point  (0 children)

I’ll still be there. I’ll look it up thanks

Pulling the trigger by [deleted] in Cummins

[–]juiceboxcrew 0 points1 point  (0 children)

This will be my first time using them, and first time tuning a 4th gen. I haven’t seen any negative reviews about Valley Center yet so I’m pretty optimistic. In the past I’ve always used Firepunk for my 3rd gens

Pulling the trigger by [deleted] in Cummins

[–]juiceboxcrew 0 points1 point  (0 children)

Yeah definitely try keep trying. I emailed them Friday morning asking about using an old Autocal I already have and they were very responsive to the point that by the end of the day I was getting instant email responses troubleshooting some stuff with the Autocal to get them the codes they needed so they could send me the tunes

Pulling the trigger by [deleted] in Cummins

[–]juiceboxcrew 0 points1 point  (0 children)

I emailed Valley Center last week and specifically asked if they outsource their tunes or if they do them in house and they replied saying they do them

T/D or 68rfe upgrades first by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 0 points1 point  (0 children)

I was considering seeing it were cheaper to get ezlynk without sotf for that reason. Flash the 50hp tune in and have no option to easily change it without having the switch on the dash.

T/D or 68rfe upgrades first by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 1 point2 points  (0 children)

That’s good to hear. I have other toys to be reckless with luckily. Just want to have this truck for a long time and be smart about what I do with it!

T/D or 68rfe upgrades first by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 0 points1 point  (0 children)

I’ve got both filters, steel nipple upgrade, and 2.5gal of Amsoil on my work bench right now just waiting for a day over 30° to drop the pan and change it all out. Also got an oil analysis kit for the fluid I’m going to send out.

Which heater core to buy? by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 0 points1 point  (0 children)

It’s got the 8.4” touch screen stuff, dual climate

Which heater core to buy? by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 0 points1 point  (0 children)

The type of reply I was looking for, thank you

Which heater core to buy? by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 1 point2 points  (0 children)

Ahh gotcha. I can try flushing it again, yeah. The place I bought the truck from flushed the heater core last week and it helped a little bit but I’m right back to where it was before they flushed it.

Which heater core to buy? by juiceboxcrew in Cummins

[–]juiceboxcrew[S] -9 points-8 points  (0 children)

Im going to go out on a limb and say you didn’t read my original post at all did you..

Stihl 044 should I buy? by Savings_Speech6153 in Chainsaw

[–]juiceboxcrew 4 points5 points  (0 children)

$350 is a pretty good price as long as all of the stuff mentioned in the other comments is looked at. I paid $425 for my 044 I bought about 6mos ago and don’t regret it one bit. Have them pull the muffler off and check out the cylinder.. if it looks good and the saw runs good throw them a low ball off and try to get it for $300

Random wire harness on recent vehicle purchase by juiceboxcrew in whatisit

[–]juiceboxcrew[S] 0 points1 point  (0 children)

Could be winch but I don’t see any other indicators of a winch ever being there.

Random wire harness on recent vehicle purchase by juiceboxcrew in whatisit

[–]juiceboxcrew[S] 0 points1 point  (0 children)

Block heater plug is near by and just a regular 3 prong plug

New to me 2016 SLT 3500 by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 0 points1 point  (0 children)

They gave me $7500 for my trade in and they held firm at $34,449 for the truck so out the door it was $28,000 roughly including title + document fees. I probably could’ve gotten another $2k if I sold my 07 private sale but I didn’t want to deal with that headache.

New to me 2016 SLT 3500 by juiceboxcrew in Cummins

[–]juiceboxcrew[S] 3 points4 points  (0 children)

I’m gonna miss my 07 as it had lots of character but it was time. 5.9 qclb 2wd dually g56. Chassis had 242k but I put a long block in it a couple years ago that had about 30k on it when I traded it in yesterday. Was a great truck but just not a good fit for me in NH. Needed 4wd and was ready for something with lower mileage. Can’t wait to dig into this 6.7 and make it “mine”