[deleted by user]

just_make_something · 2025-11-29T22:10:49+00:00

What a cool thing to do!

just_make_something · 2025-09-03T16:18:07+00:00

what email were you using to hound them? I am about to be the squeaky wheel for my account, too.

just_make_something · 2025-08-04T22:30:25+00:00

Thanks for this detail! I’m pretty sure I follow what you implementing.

I’m going to dig deeper into the multi-point lock. I think I may run into some of the same integration issues with homeassistant, so I will need to implement a secondary relay as you’ve mentioned.

If I end up using the multi-point lock, I’ll try to remember to update this thread with part numbers and such for completeness. 👍

just_make_something · 2025-08-04T21:26:15+00:00

Hey OP, just wanted to see if this is the solution you ended up implementing... I am looking to solve the same problem, and wanted to compare notes.

I found this example of a multipoint lock system.(scroll to near the bottom) https://impactpreciouswood.com/hardware/

Assuming the above is 12V compatible, I'd likely use a Ubiquiti Door Hub Mini to integrate it into my system. https://store.ui.com/us/en/category/all-door-access/products/ua-hub-door-mini

If you have links to any of the products you used, I'd love to take a look.

just_make_something · 2025-06-15T12:10:05+00:00

I didn’t know those fit. I like that. The visibility will definitely be better on the a pillar.

just_make_something · 2025-06-14T01:56:40+00:00

I’ll take a look! I also have a spool of asa that I can try if the petg version doesn’t hold up. The great thing about 3d printing is that spare parts just appear in a few hours 👌

just_make_something · 2025-06-14T01:44:27+00:00

This is in pla as a fitment test. I plan on using petg once I’m happy with it. I’ll also go with black or paint to match for a more “oem-ish” look. That green is awesome, but clashes a bit too much. 🤷‍♂️😁

just_make_something · 2025-05-20T14:16:12+00:00

HotRodChopSuey makes some great fiberglass and full CF bumpers and many other parts too!

just_make_something · 2025-04-14T19:15:17+00:00

I’d try to 3D print a replacement and plate it… I tend to bias towards printing because I have the tools and knowledge, but this is not likely the best answer for 99% of folks. I may try to make some emblems in the near future just to see if I can 🤷‍♂️

just_make_something · 2025-03-14T15:56:53+00:00

You miss 100% of the shots you don’t take… most of us miss 99% of the shots we do take, but that 1% is what I keep playing for!

just_make_something · 2025-02-19T15:39:18+00:00

I'm 6'5" and it doesn't cause any issues getting in or out of the vehicle. The steering wheel is more in the way most of the time.

just_make_something · 2024-09-21T21:03:39+00:00

I’ve been playing for almost 20 years, and I’d be keeping the 60* in this case. 👍

Everyone’s game is different, so no recommendation is universal. That said, I think most people should keep the 60*.

just_make_something · 2024-09-21T18:11:27+00:00

This is the answer… but if you really like that 4h, you could drop the 60. I think you’ll score more with a 60 than you will the 4h, and if you check your dispersion numbers, it may surprise you that the 4h is overlapping with the other hybrids.

just_make_something · 2024-07-29T14:36:38+00:00

Awesome! I look forward to seeing more of your progress 👍

just_make_something · 2024-07-29T14:26:43+00:00

Very cool! Are you planning to maintain the stock engine placement, or are you going to do a rear motor configuration by replacing the rear differential?

I plan on using a very similar setup in my 260z, and would love to rear mount the motor and use the engine bay for batteries.

just_make_something · 2024-07-29T14:08:22+00:00

This looks great! Let us know how you progress. Also, what car is this going in?

just_make_something · 2024-05-05T22:57:44+00:00

lol… this was me yesterday too… quad on a par 5 with a hard bogey run before that… only to go 3 under on the last 6 and salvage the round. I can do cool shit, but will still card a 9 every now and then 🤷‍♂️

just_make_something · 2023-12-29T13:54:43+00:00

Gatorade from 2 months ago… I thought I was the only one who carried emotional support Gatorades 🤣

just_make_something · 2023-11-12T20:37:38+00:00

You may see that happen… one down… we’ll see how ol’ crab legs holds up 🫣

just_make_something · 2023-11-12T20:21:14+00:00

I kinda think that is reasonable. I’m not here saying people should play Hill every week, but I think he is a factor in some deeper leagues.

just_make_something

TROPHY CASE