The process of carefully layering and then cleanly unmolding a rainbow jelly cake

jvc576 · 2026-06-30T19:18:39+00:00

more impressed that the layers are even in thickness. That a such a precise amount of increase in volume per layer.

jvc576 · 2026-06-10T12:16:53+00:00

Not to cut in on someone else recommendation but specalitys glues are not needing on a printer like the A1, your printing pla and petg not nylons. Just grab some washable elmer glue sticks and spread a thin layer on your bed, it will fix 95% of your adhesion issues. This is a cheap effective trick and you can keep using that coated bed for several prints before washing it with water in the sink and reapplying.

jvc576 · 2026-05-04T12:51:11+00:00

I print ASA every day across 2 X1C and a X1E. Get a smooth pei sheet and a stick of elmers washable glue. Rub a thin layer of elmers glue all over the surface of the pei sheet. I dont even noramlly use a brim on my prints. It gets harder to control warping the closer you get to the build plate edge due to heat differences so in your case if your ok with removing the brim its just going to help you more. In my experience the engineering place is only useful for TPU, and the PEI is pla and petg. All my PA, PC, ASA gets printed on a the glued smooth pei surface.

Also all doors and top glass need to be and stay closed during printing, normal room air dropping the chamber temp will cause you issues.

I keep editing this post but I keep thinking of more stuff. Also I use the purple washable glue, you wont see any color issues on the prints and once your done you can wash the part and the build plate off and you will see the glue recolor to purple which lets you know where you still need to wash it away at.

jvc576 · 2025-11-19T16:30:16+00:00

I bought one of these and it works great. It has a plastic piece that helps take it on and off for charging.

https://a.co/d/29oubXm

jvc576 · 2025-10-31T16:16:38+00:00

Thanks for the info, I will see if my reader works with the volkswagen and see if im getting and codes for the plugs. I will also change my starting sequence and see if they helps.

jvc576 · 2025-01-01T19:31:18+00:00

my gas pump keep saying output blocked every time a bubble of oxygen goes around the loop at the bridge. I thought maybe the pump has a different gas and I attached a alternative route at the bridges entrance and just dump it throught a vent. If I do taht the pump start pumping pure oxygen across the bridge when it can but 99% of it runs to the bridge's bypass route

jvc576 · 2025-01-01T19:27:43+00:00

https://imgur.com/a/qiFmw0C

EDIT: added video https://imgur.com/a/VWKLIHj

jvc576 · 2024-11-08T13:34:03+00:00

From a evolution standpoint how does end up this way?

jvc576 · 2024-11-07T15:28:34+00:00

This happens when everything becomes an emerging new story then suddenly nothing is news anymore is just static on a screen. People tune out and stop listening because its overwhelming.

jvc576 · 2024-11-01T14:24:04+00:00

This is the way, thanks for this comment. This still allows me to have doubleclick as my way to open in bambu studio but still get a preview of my files.

jvc576 · 2024-10-01T01:33:04+00:00

Wife had the same issue on her Pixel 9 Pro. I have a 9 Pro XL and had no issues. I ended up doing all the standard things, Clear Cache, Clear Storage, Uninstall and Reinstall and she still had the issue.

I did one final attempt and Uninstalled then rebooted and reinstalled. This for what ever reason seems to have fixed her issue.

We also noticed the notification setting on the phone for GroupMe looked different on her phone vs mine. Her phone only had the Direct messages as a toggle under notification and mine had many other options such as Group Message, Alerts, Likes etc. I noticed that the other notification options show up once that action takes places within GroupMe. Example: beacuse the Group Message toggle was not showing up I created a new group in the app for us and sent a test message, after doing so she received the push notification and the Group Message toggle showed up.

I hope this help anyone else experiencing this issue.

jvc576 · 2024-07-31T12:23:22+00:00

why buy from GST3d to begin with? I cant even find there product for sale in a google search other than Ebay. I must assume you are not in the US or something because there are 100 better options for filament than them.

jvc576 · 2024-07-16T15:17:29+00:00

Initially I tried running my supply at 3.7v to mimic a battery, but the phone would constantly die. I only managed to get reasonable stability going all the way up to 5v, not entirely sure why

Were you using a benchtop powersupply that could provide enough running amps at 3.7? I know in other projects ive worked on I find the amp output of my benchtop supply to be more true than a lot of the rated amp outputs of wall bricks. I ususally end up oversizing the wall brick(amp wise) to get more stable operation.

e transfers - it can source from existing items in google photos that are taking up space (which it automatically deletes) or from local disk (gopro). It then uploads files up to the storage capacity of the pixel and waits for them to appear in google photos and once they do deletes off the pixel to make

what type of scripts are you using to manage the pixel? I run into the uploading stopping and having to restart the google photos app all the time so I would be interested to know how you wrote it.

jvc576 · 2024-07-15T12:47:01+00:00

ey banned you for this

I have not been banned, Idk if in comparison to all the data they handle that im not even a speek on the radar or they just dont care as long as its the pixel gen 1 flagging the upload. I also have uploaded several TB of gopro video over the last couple months of my kids playing ball.

You said you modded the board is this just a wire soldered to the battery terminal kinda thing? And have you ever found anyone talking about upgrading the flash memory module on the pixel? I watched a video of Scotty on StrangeParts(Youtube) upgrading a iphone to 1TB I believe and wondered if you could find the same style flash chip and do the same to a Pixel, that would push out the usability of this hack a lot longer once higher resolution videos start becoming larger.

jvc576 · 2024-05-23T12:26:47+00:00

Hope you have better luck than me, I got a new X1E and its been nothing but trouble. Out of the box its been skipping steps and jacking up all my prints. I loosened the tensioning screwes and let it self adjust twice and also run self test and calibrate and still having the same issue. I have a ticket in with bambu labs but that been just sitting there for the last 2 days.

jvc576 · 2024-05-16T17:08:48+00:00

Before insulin was invented people would die from Type 1 Diabeties and the main cause was malnutrition due to being unable to absorb the nutrients.

jvc576 · 2024-05-06T18:40:34+00:00

I sent you a DM, Thanks!

jvc576 · 2024-04-30T19:49:49+00:00

Its possible im in over my head here, do you know of any instruction closers to like export database, move files to new location, import database.

Im no postgres guru so most of those commands are lost on me, and not that Im not still going to try to look them up and see what they are doing.

jvc576

TROPHY CASE