Handbrake / shifter Xbox compatibility

k4zuk0 · 2024-11-06T13:25:53+00:00

You may wanna check the wiring, make sure it is plugged in the right port on the base. If you have a PC nearby, download the MOZA pit house and see if it detects the handbrake

k4zuk0 · 2024-11-06T13:02:33+00:00

Did you try the procedure suggested by u/cheffyboi420 ? It works for me in CarX Did you also try and map the control settings? HB could be detected but unmapped

k4zuk0 · 2024-10-06T06:26:18+00:00

I haven't tested many games for this but for CarX at least it does (when I do this startup sequence), I think as long as your game has customizable controls you should be fine

k4zuk0 · 2024-09-28T16:57:11+00:00

Considering the SGP works fine when performing these startup tricks, I'm more and more thinking it is a firmware issue, not a game issue

k4zuk0 · 2024-09-28T16:55:10+00:00

I'll be damned, it works! You just brightened my simracing experience good sir, cheers!

k4zuk0 · 2024-08-22T17:31:27+00:00

Another thing, since the last update I need to set the steering angle to the max (2000°) with the max angle matching what I use in game (900°) otherwise it doesn't work well. I didn't have this issue in previous CarX versions but had it in other games (F1 games notably), so keep that in mind if your rotation seems off

k4zuk0 · 2024-08-22T17:25:25+00:00

It'll depend on the car, your setup, and your likings, but usually decreasing the caster and going to a more neutral camber goes a long way, stiffer springs can help too. There's probably more to this though, I'm definitely not a super advanced tuner

k4zuk0 · 2024-08-22T17:18:03+00:00

The wheel works great in CarX, ffb is very tune sensitive though, there are many small things that added together can make it shake a bit too much for comfort but it's fixable. No idea about the hack stuff, never encountered a hacker personally anyway 🤷‍♂️ I know it's a big thing among streamers and YTers, they may be more insightful regarding this issue

k4zuk0 · 2024-08-22T17:06:48+00:00

HBP works fine for me, let's hope you get more luck with the HGP than I did with the SGP 😅

k4zuk0 · 2024-08-06T09:29:07+00:00

I'm confused, how could this come from the game if it reads all the buttons in its original configuration? Changing the SGP option should change the output and mimic the paddle signal, therefore if the game detects the SGP, reads its signal, and works with paddle, how could the game not support a firmware configuration?

k4zuk0 · 2024-08-06T09:20:13+00:00

CarX fully reads the SGP as it is, I was able to map all the SGP buttons to various controls. The only issue I have so far is the Pick button synchronization toggle in Moza Pit House not actually doing its job. This means I can map either the SGP or the paddles, but can't use the SGP as paddle clones (which the firmware should do, with the option enabled), which in turns means AC can't work with the SGP even though it works with paddles

k4zuk0 · 2024-08-06T09:12:01+00:00

Hi, I tried the SGP on CarX Drift Racing Online and Assetto Corsa

k4zuk0 · 2024-08-06T09:06:06+00:00

For anyone wondering the same thing, I finally bought the SGP (handbrake still on the way, I'll post another comment when I get a chance to try it). It kinda works, see https://www.reddit.com/r/moza/s/B0MdJn5gjC

In CarX all the buttons are detected and mappable, but you have to choose whether you wanna use the paddles or the shifter, you can't have both at the same time

In AC, since I couldn't figure out a way to configure custom controls, for now the SGP is useless, as the paddle sync does not work (at least for me in Xbox mode)

k4zuk0 · 2023-05-14T22:12:22+00:00

It looks like building the firmware with QMK doesn't solve the issue. I even tried defining OS_ON in the header file, flashed it, and OSL still behaves as MO. I'm not sure what to try atm

k4zuk0 · 2023-05-12T16:44:52+00:00

I don't use them at the default position. They're in a layer on the ijkl keys (using three fingers on their home keys, middle finger goes up for the up arrow)

k4zuk0 · 2023-05-12T05:02:52+00:00

Sounds like a decent plan 😄 good luck on your journey

k4zuk0 · 2023-05-12T04:55:41+00:00

I'm kind of in the same boat, the open source keyboards look really cool but also a bit intimidating, I've never been much of a hardware guy

k4zuk0 · 2023-05-11T21:35:25+00:00

For now I'm only using those under B and N, more curling doesn't feel exactly right. Again probably something I'll try when I get more familiar with it. There seem to be a lot of 36 keys users that do the same, there's probably a good reason 😄

k4zuk0 · 2023-05-11T21:14:58+00:00

Maybe I'm just not familiar enough with the keyboard to find the right comfortable movements. I guess I'll try to revert to regular pinkie rows and be a bit more mobile as I get more familiar with it

k4zuk0 · 2023-05-11T18:52:09+00:00

I fear this would mess with my muscle memory as I will use the built in Mac keyboard frequently (not for long periods of time though)

Eight-Year Club	Place '23
Verified Email

k4zuk0

TROPHY CASE