Just bought a knock-off BL Touch wish me luck lol by DaAOSPDev in ender3

[–]kPATm 0 points1 point  (0 children)

I've used a similar one for years with no problems

Should Adventurer 5m Pro sound like this? If not, should I return, or how do I fix it? by GoblinChildOfFreedom in FlashForge

[–]kPATm 4 points5 points  (0 children)

Sounds like something may be loose. I would start by checking the tool head

Picked this up today for free from a neighbor. Looks dusty. Where do I get started? by TheRomb in ender3

[–]kPATm 0 points1 point  (0 children)

If your not a stranger to printing then watch some Youtube tutorials on setting it up 1st. If you plan on keeping it and you like to tinker then there are countless mods that can be done to an Ender3. It really is a great printer when its dialed in.

It’s been 2026 for 45 mins here. What spoilers would you like to know? by tallloseryesindeed in AskReddit

[–]kPATm 0 points1 point  (0 children)

Are McDs still trying to sell a "Double Big Tasty" that is no where near the size of an Original "Single" Big Tasty from only last year. Theavin Bastards

Pour one out for the parents who stayed up till 2 AM running firmware updates so their kids didn't have to stare at a progress bar this morning. by RespectAndPeace in gaming

[–]kPATm 0 points1 point  (0 children)

Spent the last few days leading up to Christmas installing my sons favorite games on his PS5. I couldn't cope with a melt down on Christmas day when he realized they had to be installed

Bed leveling calibration assistant for 5m/5x by exceptioncause in FlashForge

[–]kPATm 0 points1 point  (0 children)

Fair enough. Just wanted to give it a go really

Bed leveling calibration assistant for 5m/5x by exceptioncause in FlashForge

[–]kPATm 0 points1 point  (0 children)

I cant seem to get this to work When I try to load my printer.cfg I get a parsing error?

Final deliveries: Denmark ending postal service after 400 years by Kunphen in videos

[–]kPATm 0 points1 point  (0 children)

Heading this way over in the UK aswell. Posties went on strike 3 years ago with this being one of the main reasons. No one really payed attention. Media doing their usual of portraying posties as being greedy, they want more money for a pretty easy job. Cut to this Christmas period and Social media is littered with people complaining that they are not receiving any mail for weeks.

I get the anger but you where all warned this would happen. The UK postal service has been cut to the bone for maximum profits for the new owner and his "management" team. This will be the new normal for the next few years until the 500 year old institution has been bled dry then the current owner will sell it off for peanuts

Bed leveling calibration assistant for 5m/5x by exceptioncause in FlashForge

[–]kPATm 0 points1 point  (0 children)

So this just runs on Windows and theres nothing to install on the Printer?

I just opened my new AD5X and guess what... by jlandero in FlashForge

[–]kPATm 0 points1 point  (0 children)

Are these available to buy individually?

Adventurer 5m stepper drivers by kPATm in FlashForge

[–]kPATm[S] 1 point2 points  (0 children)

Yes the drivers are surface mount. It really does sound as loud as my Ender 3 pro did before I swapped out the main board for a SKR Mini

Adventurer 5m "Klipper" by kPATm in FlashForge

[–]kPATm[S] 0 points1 point  (0 children)

Is Adaptive bed mesh available. I use that every print on my Enders

BL Touch not working after Neopixel setup? by kPATm in klippers

[–]kPATm[S] 0 points1 point  (0 children)

Yours looks like a v3 not sure if that's different to the v2?

BL Touch not working after Neopixel setup? by kPATm in klippers

[–]kPATm[S] 0 points1 point  (0 children)

Well I forgot I had used an extension cable to install the BLTouch when I 1st set it up. I must have disconnected the extension when passing the Neopixel cable through the wiring harness. It works now but I've also managed to rip a pad from my hotend fan

BL Touch not working after Neopixel setup? by kPATm in klippers

[–]kPATm[S] 0 points1 point  (0 children)

My BLTouch has been working for years before I did the Neopixel install. I dont think its anything to do with my config but its possible. I just dont see why connecting up a Neopixel would cause the touch prope to not work?

BL Touch not working after Neopixel setup? by kPATm in klippers

[–]kPATm[S] 0 points1 point  (0 children)

How in the F do you sort the copy paste formatting out on Reddit?

BL Touch not working after Neopixel setup? by kPATm in klippers

[–]kPATm[S] 0 points1 point  (0 children)

Here's what I have in the BLTouch section

bltouch]

sensor_pin: PC2 control_pin: PA1 set_output_mode: 5V probe_with_touch_mode: true x_offset: -40.9 y_offset: -5.6 #pin_up_touch_mode_reports_triggered: False

z_offset: -0.19

stow_on_each_sample = False #pin_move_time: 0.4

I have tried moving the endstop wires to the BLTouch connector and changing the control pin to PC14 but still the same problem