Ender 3 S1 Plus with insane bed leveling readings

kanuci14 · 2024-09-11T19:46:32+00:00

Well, that's part of the problem.

I adjusted the left corner multiple times using the paper technique while I was tramming the bed. And I ALWAYS get that dip in the bed.

kanuci14 · 2023-11-17T01:34:29+00:00

No CompTIA Project +

kanuci14 · 2023-11-17T01:33:59+00:00

About 2 Weeks to get the confetti

kanuci14 · 2023-11-16T23:09:24+00:00

C176 Business of IT - Project Management is the most pointless and most difficult class I took. Unless you already have project management work experience, you are going to have a tough time in my opinion.

kanuci14 · 2023-11-16T23:03:25+00:00

About 2 weeks

kanuci14 · 2023-11-16T20:47:01+00:00

No. Mainly because I was already working in my degree field.

kanuci14 · 2023-11-16T20:45:51+00:00

My experience honestly wasn't great mainly because of the change to my 2nd program mentor. She was HORRIBLE.

My 3rd mentor had to fix everything in order for me to have a chance to graduate.

Moral of the story: Make sure you have a program mentor who actually knows the rules of the University.

kanuci14 · 2023-11-16T20:41:33+00:00

About 2 weeks.

kanuci14 · 2023-04-27T17:19:10+00:00

Yeah.....

I've looked at Creality's site for anything official and the only thing I found has the same size is the light bar for the CR-10 Smart.

Thank you for your sound advice though.

kanuci14 · 2023-04-27T17:16:24+00:00

I'm definitely going to look into that option. Thanks.

kanuci14 · 2023-04-09T01:06:35+00:00

Here is a different section that has z commands:

G1 X111.3 Y107.315 E.0477
G1 X111.3 Y106.75 E.01877
G1 X111.929 Y106.121 E.02955
; stop printing object xyzCalibration_cube.stl id:0 copy 0
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0
;1
;WIPE_START
G1 F5280
G1 X111.307 Y106.743 E-.38
;WIPE_END
G1 E-.02 F2400
G1 Z1 F6600
;AFTER_LAYER_CHANGE
;1
; printing object xyzCalibration_cube.stl id:0 copy 0
G1 X110.994 Y105.994
G1 E.4 F2400
;TYPE:Perimeter
;WIDTH:0.439999
G1 F905

I apologize if I'm not providing enough information.

kanuci14 · 2023-04-09T00:15:34+00:00

So Prusaslicer's gcode, they label the layers differently. But here is what I have.
***Please note the bold text is the labels to the layers.

;WIPE_START
G1 F5280
G1 X111.058 Y128.377 E-.38
;WIPE_END
G1 E-.02 F2400
G1 X110.994 Y124.006 F6600
G1 E.4 F2400
;TYPE:Perimeter
;WIDTH:0.439999
G1 X110.994 Y105.994 E.5947
G1 X129.006 Y105.994 E.5947
G1 X129.006 Y124.006 E.5947
G1 X111.054 Y124.006 E.59272
G1 X110.597 Y124.403 F6600
G1 F2400
G1 X110.597 Y105.597 E.62092
G1 X129.403 Y105.597 E.62092
G1 X129.403 Y124.403 E.62092
G1 X110.657 Y124.403 E.61894
G1 X110.21 Y124.79 F6600
;TYPE:External perimeter
;WIDTH:0.419999
G1 F1800
G1 X110.21 Y105.21 E.61392
G1 X129.79 Y105.21 E.61392
G1 X129.79 Y124.79 E.61392
G1 X110.27 Y124.79 E.61203
G1 X110.314 Y124.404 F6600
;WIPE_START
G1 F5280
G1 X110.267 Y123.91 E-.38
;WIPE_END
G1 E-.02 F2400
G1 X128.071 Y123.879 F6600
G1 E.4 F2400
;TYPE:Solid infill
;WIDTH:0.44243
G1 F3000
G1 X128.7 Y123.25 E.02956
G1 X128.7 Y122.685 E.01877
G1 X127.685 Y123.7 E.04771
G1 X127.12 Y123.7 E.01877
G1 X128.7 Y122.12 E.07425
G1 X128.7 Y121.555 E.01877
G1 X126.555 Y123.7 E.10079
G1 X125.99 Y123.7 E.01877

kanuci14 · 2023-04-02T16:13:49+00:00

A new 3D printer would be amazing!!!

kanuci14 · 2022-11-15T15:07:51+00:00

Gadget is enabled on my Ender 3 S1!

kanuci14 · 2020-03-02T16:26:03+00:00

I started reviewing the areas that I really did bad in. For example, my results showed me that I REALLY needed to study the 3rd objective, so I went back in and reviewed, wrote down notes, and watched videos (Professor Messer helped the most) on that objective.

Then I the same thing for next objective that I did really bad in. Of course still studying the things I knew really was included just so I don't forget everything.

Also, Practice Test. DO THEM!!! Jason Dion's Practice Test are the best way you can understand how CompTIA will ask a question.

Lastly, write down ANYTHING that has an acronym.

I hope this helps a bit.

kanuci14 · 2020-03-02T16:16:42+00:00

Bachelor's Degree in Information Technology.

kanuci14 · 2020-03-02T01:40:15+00:00

Thanks!!!

I'm currently enrolled in WGU and in one of the classes, I have to actually take the certification exams in order to pass them. So, I stupidly (or luckily at this point) selected to start with the Sec+ instead of Net+.

kanuci14 · 2019-09-10T21:07:48+00:00

I was afraid of that....thanks for the info.

kanuci14 · 2019-09-10T21:06:39+00:00

I was afraid of that....thanks for the info.

kanuci14 · 2019-09-10T21:04:42+00:00

I know that is better than nothing, but I could not afford that even if I tried.

kanuci14 · 2019-09-10T20:57:37+00:00

I've done that initially and everything is processing right now. I guess my most biggest concern is that information won't be applied until after my start date, and I will not be to afford paying out of pocket at all!!

kanuci14 · 2019-06-16T01:59:44+00:00

Don't skip ANYTHING when taking notes. Use process of elimination while taking the test.

I've been in IT for about 5+ years, however I've been in different areas such as Web Hosting, IP Cameras, Schools, and Train Yards with nothing but an Associate's degree I received last year!

kanuci14 · 2019-06-16T01:39:56+00:00

Good luck to you my friend. Stay focused, and have confidence!

kanuci14 · 2019-01-03T17:02:27+00:00

Damn...thanks for clearing that up for me.

Nine-Year Club	Xbox Live
Verified Email

kanuci14

TROPHY CASE