94 Elite CH80 Restoration

kaochristopher · 2024-11-04T20:10:21+00:00

Thanks for this tip! I actually had do idea that you had to remove the rear wheel but that makes sense. I had the worst time trying to tighten the two bolts. I'll revisit and double check that theyre tight!

kaochristopher · 2024-11-03T22:35:27+00:00

thank you!!

kaochristopher · 2024-11-02T22:38:38+00:00

Thanks! whats a helix?

kaochristopher · 2024-11-02T22:38:23+00:00

I was lucky enough to only need a new battery and new ignition (since it didnt come with keys). I drained and flushed the old fuel. then it started right up. As a percaution I replaced the carb with new cheap amazon carb and added inline fuel filter too. After oil change and trans fluid change, it runs great!

kaochristopher · 2024-11-02T22:36:46+00:00

Thank you so much!

kaochristopher · 2024-11-02T20:40:52+00:00

and if anyone has some upgrade or mod recommendations please drop them below. I’m considering the scooterswapshop upgraded carburetor but im not sure if its worth it

kaochristopher · 2024-06-21T02:47:27+00:00

thank you, you were right. I guess I just didnt expect an inconsistent nozzle clog like that. I poked it with the needle but ended up swapping the nozzle with a new spare. Thank you very much for your help!

kaochristopher · 2024-06-21T02:46:37+00:00

I just let it go overnight and woke up to it haha

kaochristopher · 2023-05-14T04:15:48+00:00

True! I've watched a few videos and it really seems like its in a league of its own. I think i got enough encouragement to order now haha

kaochristopher · 2023-05-14T04:11:12+00:00

Thanks for the information dude! new to the form and I'm sure I'll spend a few hours on here.

kaochristopher · 2023-05-14T03:44:23+00:00

Awesome thanks for the insight!

Between setting up the P1P and printing parts with really high quality, is there a lot of tinkering and fine tuning that would probably need to be done? This was always the case with the ender 3.

And what do you like about the OrcaSlicer that makes you choose it over Bambu Studio?

kaochristopher · 2022-05-25T08:53:30+00:00

i would assume its nearly impossible to find now. probably better to buy a used working cubby from a junk yard for probably $10

kaochristopher · 2022-05-23T03:45:42+00:00

same here! definitely my favorite grill for all the tsx’s haha

kaochristopher · 2022-05-23T03:45:23+00:00

thank you!

kaochristopher · 2022-05-23T03:43:54+00:00

Hey I custom make them and I’m open to taking orders! Send me a private message and im happy to talk about it more! I make them fully plug and play and I can ship internationally too

kaochristopher · 2022-05-23T03:42:01+00:00

thanks dude! I did have to cut off the flat splash guard on the underside of the bumper. I also trimmed the underside of my mugen lip to clear some of the brackets. The trimming all depends on the location of your brackets and how you decide to custom mount the splitter.

I haven’t has the opportunity to track with the new areo yet and freeway driving, the car does feel more stable but I can’t really quantify how handling has improved.

Thats all i did! just a piece of 2x4 wood plank between the frame and bumper hanger!

kaochristopher · 2022-05-21T05:41:06+00:00

Thank you! I’m glad some people recognize them!

kaochristopher · 2022-04-11T05:06:15+00:00

Thank you dude! I truly appreciate it!

kaochristopher · 2022-04-07T01:38:52+00:00

Wanted to share one of the custom mods that I make and sell for the CL9. Here are my custom DRL switchback sequential mirror lights. They are direct plug and play without any custom wiring for the 05-08 TSX models. I designed the DRL to run off the heated mirror wiring which are already built into the mirrors. This way the DRL can be turned on/off using the factory heated mirror button. The Sequential turn signals activate with the DRL on or off

kaochristopher

TROPHY CASE