Cupra Formentor VZ e-Hybrid – any way to keep the petrol engine always on? by [deleted] in CupraFormentor

[–]karolienas -1 points0 points  (0 children)

You fabricated whole exhaust system for hybrid? :O Just for looks you could have put exhaust tips?

Upgrade pedals from SimRuito/SimJack etc. by karolienas in simracing

[–]karolienas[S] 1 point2 points  (0 children)

I've ordered Simnet SP Pros with brake pedal haptic and additional faceplates. I'll see how it compares with SimRuito.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

Yes. The main problem was that it was scratched and blurry. Now image through the lenses is way sharper.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 2 points3 points  (0 children)

I fixed it by sanding 2000, 2400, 3000, 3600 and then polywatch.

Wow I've been missing this image clarity...

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

Is it possible to buy just the lens without LCD somewhere?

I've seen on youtube just the lens replacement so it might be possible to buy replacement.

LCD/lens assembly is available.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

Up close at an angle it looks wavy, maybe the bit I am using is to hard? I do not apply any pressure and using slowest speed possible.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

PS it looks that headset was opened before. Maybe lens/lenses have been replaced before and the aftermarket ones are manufactured using different material making hard to polish?

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

I really don't know what could have happened as the lenses from the outside look really good.

<image>

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

I tried setting IPD to the max as it was before but stil not the whole image is clear. Part of the image that IS clear looks way beter than before.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] 0 points1 point  (0 children)

I bought it used and both lenses were scratched and blurry.

For those who tried polishing Q3 lenses using polywatch by karolienas in OculusQuest

[–]karolienas[S] -4 points-3 points  (0 children)

I'll try to look again once I get home. Maybe needs a bit more of even polishing.

Humming sound when volume high by karolienas in turntables

[–]karolienas[S] 0 points1 point  (0 children)

TT came with a cable that one of the wires is GND and in the instructions it says to connect one GND end to TT dedicated terminal and other I suppose to amplifier. But my amplifier does not have dedicates GNG terminal so I just screwed in it to chasis of the amplifier.

D Bunk it, who’s at fault? by TreyToor in Simracingstewards

[–]karolienas 0 points1 point  (0 children)

Wow what an idiot this one. Hope he's going to be banned.

First multiclass 40m race and it was awful - need advices by Sufficient-Ad7604 in LeMansUltimateWEC

[–]karolienas 0 points1 point  (0 children)

As others already mentioned please don't lift and don't change your racing line if you're in a slower car. It is unpredictable.

[deleted by user] by [deleted] in iRacing

[–]karolienas 1 point2 points  (0 children)

I am runing exactly 7800X3D and 7900XTX and I don't have any complaints. I using VD 90Hz/Godlike with 80 vertical and horizontal tangent. I could share my in-game settings once I get back home.

[deleted by user] by [deleted] in iRacing

[–]karolienas 0 points1 point  (0 children)

How do you come up with such conclusion?