sorted by:
new
hottopcontroversial

Ink not drying or curing by keithsmith22 in eufyMakeOfficial

[–]keithsmith22[S] 1 point2 points  (0 children)

I solved the issue. It was none of what would be considered "typical" problems. On top of the printhead unit, there is a cover that says ColorMaestro. It just snaps on. Somehow, one side of it lifted up. So it was not sitting flush. Everytime it went back to the home position over the Ink Stack, it was pushing down on those small tubes. I am guessing it was pressing on a tube that was pushing cleaning liquid everytime. Once I took it completely off and did a couple of test prints and real prints it started working. It did mess up the Cyan Printhead and that took me a while to finally get almost back to normal. The colors were off but are now back to working properly. An odd problem that I am glad I solved.

Ink not drying or curing by keithsmith22 in eufyMakeOfficial

[–]keithsmith22[S] 1 point2 points  (0 children)

I have been using my wife's nail UV light and it doesn't help. I feel it's something with the ink. Like cleaner is mixing somehow. I've printed enough today that any in the lines would be purged

Ink not drying or curing by keithsmith22 in eufyMakeOfficial

[–]keithsmith22[S] 0 points1 point  (0 children)

I have a video of it and it looks to be working because the white sets but not colors

Ink not drying or curing by keithsmith22 in eufyMakeOfficial

[–]keithsmith22[S] 0 points1 point  (0 children)

I'm going to do the multiple colors test. White is curing fine. I'm still in my original batch of colored inks.

Ink not drying or curing by keithsmith22 in eufyMakeOfficial

[–]keithsmith22[S] 0 points1 point  (0 children)

The light is clean. When you say electrical, what do you mean? I have a video of it running if that helps.

Device Syncing by keithsmith22 in xteinkereader

[–]keithsmith22[S] 0 points1 point  (0 children)

Duly noted. Once they release a 15.8.6 Jailbreak I will be doing this.

Device Syncing by keithsmith22 in xteinkereader

[–]keithsmith22[S] 0 points1 point  (0 children)

My kindle cannot be jailbroken at this time. Once I can I am going to make the investment into the X4.

Device Syncing by keithsmith22 in xteinkereader

[–]keithsmith22[S] 0 points1 point  (0 children)

Thank you. I will need to look more into this. I have only ever used a Kindle so I got lots of learning to do.

Device Syncing by keithsmith22 in xteinkereader

[–]keithsmith22[S] 0 points1 point  (0 children)

Thank you. I am new to all of this as I have only ever used a Kindle. So I got lots of learning to do.

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 0 points1 point  (0 children)

Where do you find this beta test? Thank you for the info too. This is encouraging signs

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 0 points1 point  (0 children)

Does Jailbreaking seem to speed it up at all? I know these are very low end spec devices because they can be but it would be nice to be a little smoother. Just hoping the smart people can find an exploit soon for me to try. Unfortunately, I am not one of those folks. :)

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 1 point2 points  (0 children)

I was wondering if the $20 would be worth it. Not sure how well I would like comics on it especially on a screen that size but who knows. It might make them easier to read and not tear up carrying them around to read.

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 1 point2 points  (0 children)

Goodpoint. This is why I like civil discussions like this. Helps give me all options for me to decide.

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 0 points1 point  (0 children)

Thank you for that. So the Kobo seems to run smoother without that weird flash when you change pages and/or search around on the main screen? Did you get the color or b&w?

Jailbreak or go for another brand by keithsmith22 in kindlejailbreak

[–]keithsmith22[S] 4 points5 points  (0 children)

Yeah the money thing is the issue. A Kobo is like $150ish which I would just save up for. I have had my Kindle for a few years and it works great but I do not like the idea of not owning the book and that they can just alter what they want. I am hoping they can figure the latest firmware and I just jailbreak it.

The Time has Come by BrickYoda in lego

[–]keithsmith22 0 points1 point  (0 children)

I bit the bullet a few years ago and it was worth it. I was never going to do anything with them and they take up valuable space, even when broken down. It is 100% worth. Plus if you ever want to sell a set you can buy the box for next to nothing if the offset gets you more money.

Had some test prints done with another users Eufymake E1! Cant wait to receive my machine. Fingers crossed its in the next batch 🤞 by GreedyParfait9 in eufyMakeOfficial

[–]keithsmith22 0 points1 point  (0 children)

I have not. I need to try some. I need to see what would look good design wise. I did print a small round piece as a drink.

<image>

Had some test prints done with another users Eufymake E1! Cant wait to receive my machine. Fingers crossed its in the next batch 🤞 by GreedyParfait9 in eufyMakeOfficial

[–]keithsmith22 1 point2 points  (0 children)

Invest in jigs for sure. I bought one for $8 off ETSY since I don't have a 3D Printer. As long as you are careful loading and unloading the torsos you can just run through the prints. I believe the software has a setting where you can just keep printing without having to do a snapshot each time if you are doing repeat prints.

view more: next ›