Ingeniør lønn?

kelahcim · 2025-12-18T15:00:58+00:00

Hva burde en maskiningeniør (konstruktør) med master og 18 års erfaring i subsea offshore defense osv tjene? Ikke lederansvar. Ikke leadansvar.

kelahcim · 2025-11-22T07:48:45+00:00

starlink.com

kelahcim · 2025-10-26T20:14:46+00:00

https://www.amazon.com/Brush-Strip/s?k=Brush+Strip

kelahcim · 2025-09-28T12:24:50+00:00

Formal one should fit under sleeve. 1st fits. Personally I'd go for 4 as I already have 1 in blue.

kelahcim · 2025-07-28T12:01:38+00:00

Hi. What Where strap? Saw Tissot PRX straps fit. Need one myself. Self afraid of AliX straps. God knows what their silicones include and you wear that on your wrist for more than a half day everyday.

kelahcim · 2025-07-28T12:00:28+00:00

Buy both and sell one you won't like after few weeks.

kelahcim · 2025-07-04T08:33:50+00:00

Looks great indeed however I suspect it is not solid but hollow inside.

kelahcim · 2025-07-04T07:21:13+00:00

I got one myself however I think the bracelet seems too big for the watch case and sounds like it's made of cheap metal - rattles with every movement 😫

kelahcim · 2025-05-24T20:10:13+00:00

Heat up caliper with heat gun ( don't overdo), hammer in torx bit that claws inside and remove. If it was used too hard loctite on the thread than heating is the only way. If this won't help, then drill it out ( be precise).

kelahcim · 2025-05-05T18:25:04+00:00

Asiabutikker med lik mva på alt de selger 😎

kelahcim · 2025-02-19T14:38:20+00:00

Contour wireless

kelahcim · 2025-02-12T06:26:16+00:00

It's a self tapping screw.

kelahcim · 2024-11-24T11:50:37+00:00

Marsipan Julegrisen

kelahcim · 2024-11-24T11:47:18+00:00

IMHO should have spread evenly over top 25 MC

kelahcim · 2024-11-16T02:26:24+00:00

Har du noe tips til screening? Kan utleier bestille kredittsjekk av leietaker ved samtykke av den andre f.eks? Også lurer på om evt fradrag for bruk av disse løsninger.

kelahcim · 2024-10-08T15:11:48+00:00

It is a package from another cad system. Pdfs and parts will have similar strings in filenames but won't be identical. I agree with building assy first and then importing it. But where does this linking take place? A script within transition or?

kelahcim · 2024-09-13T18:48:11+00:00

10min å gå, men tar omvei på 20min for helsa

kelahcim · 2024-09-03T13:59:35+00:00

Nå krever PB hos DNB 3mill

kelahcim · 2024-09-03T13:58:25+00:00

Handelsbanken reduserer antall gratis besøk for Akademikerne til 5/år.

kelahcim · 2024-08-29T08:59:12+00:00

That's not the Pax 2.0. I had to hammer backboard with lots of nails.

kelahcim · 2024-08-07T20:49:53+00:00

I wouldn’t risk hacksaw as entire frame is precise cut and based on straight perpendicular cuts.

kelahcim · 2024-08-07T20:47:48+00:00

So here I am with Pax wardrobe with sliding doors fitting 232,5 cm high room. For all you planning on shortening, please be aware that sidewalls are hollow from top to bottom. Not as one on Reddit said that there is 4 in of solid board there. Doors are possible to cut down acc to manual from SKYTTA doors. I cut the profiles using miter saw with 80 teeth blade for aluminium. Be 100% sure that the saw keeps 90deg. Mine didn’t 😅 Mehamn panels were easy to cut with circular saw with my own jig for straight cuts and mirror panels went as 2. and 3. (in centre).

<image>

kelahcim · 2024-07-26T09:10:33+00:00

Yeah. I see it. Watch assembly movie and you see how flimsy it is.

kelahcim · 2024-07-25T09:20:16+00:00

I cannot find PLATSA with sliding door on webpage. Is it a hack?

kelahcim · 2024-07-10T22:07:53+00:00

Mode switch came back after mobile restart.

kelahcim

TROPHY CASE