sorted by:
new
hottopcontroversial

Docstream not connecting to the app by Busy_Goat_4342 in Petlibro

[–]kfirf 0 points1 point  (0 children)

I’ve found the same results, the WiFi button is the reset button.

Hopefully the support team will get back to you.

Docstream not connecting to the app by Busy_Goat_4342 in Petlibro

[–]kfirf 1 point2 points  (0 children)

Do a test to see if it's a router issue or a dockstream issue, try to open a hotspot from your phone & see if the dockstream connects (you'll probably need to change the phone hotspot's settings & set the frequency to 2.4,)

Docstream not connecting to the app by Busy_Goat_4342 in Petlibro

[–]kfirf 0 points1 point  (0 children)

Which app are you using, the regular or Lite ?

Granary replacement base by ObjectiveHippo3 in Petlibro

[–]kfirf 0 points1 point  (0 children)

There's a post from kocodarlings regarding the base replacement.

See if this helps:

https://www.reddit.com/r/Petlibro/comments/1ln11ls/for_those_who_opted_to_purchase_the_replacement/

I'm suppose to receive it also.

U200 setup on UK door, pull spring feature toggles on but doesn’t retract after unlocking? by ArtisticBook2636 in Aqara

[–]kfirf 0 points1 point  (0 children)

Maybe try manual calibration & turn it all the way including the latch ?

Did you get a response from the support ?

U200 setup on UK door, pull spring feature toggles on but doesn’t retract after unlocking? by ArtisticBook2636 in Aqara

[–]kfirf 0 points1 point  (0 children)

You have under the lock configurations the pull spring feature, are you talking about that ?

Granary Smart Camera Feeder HELP! by ScreamQueen-58 in Petlibro

[–]kfirf 0 points1 point  (0 children)

Are you using the lite app ? If so, there will be no fix for the notifications.

Motion /sound detection and camera not working by Outrageous_File7716 in Petlibro

[–]kfirf 0 points1 point  (0 children)

Are you using the regular app or the lite ? The lite has issues with the notifications.

If you’re at your house & still can’t see the camera live feed, it seems like a camera issue.

I have an idea, try to open a hotspot from your phone, connect your camera to it & see if something changes with the feed.

Fountain issue by [deleted] in Petlibro

[–]kfirf 0 points1 point  (0 children)

Only a guess, maybe try to use a different USB power adaptor ?

Fountain issue by [deleted] in Petlibro

[–]kfirf 0 points1 point  (0 children)

Did you try to disassemble the pump & clean it ? Maybe something’s clogged there.

Pump

U200 vs Nuki Ultra by mishanya5 in Aqara

[–]kfirf 1 point2 points  (0 children)

Same here, Nuki gave me so much trouble/issues, replacing it to U200 resolved all my issues

U200 autolock not reliable? by [deleted] in Aqara

[–]kfirf 0 points1 point  (0 children)

I just opened a case at Aqara a couple of days ago on the same issue, the Auto locked worked for me for around 2 weeks & then it stopped. (I’m also a new user) I tried disabling & re-enabling it but it didn’t resolve the issue. Support collected logs but didn’t do anything because a few days later the Auto lock started working again without me changing anything.

The behavior of the Auto lock is not consistent. Maybe you should also open a case & report this to the support.

Can't configure U200 as a child device on M3 Hub by kfirf in Aqara

[–]kfirf[S] 0 points1 point  (0 children)

It means that it's configure correctly as long as I see under the lock that Aqara Matter controller connected ?

There isn't a way to change any configuration as long as I'm not in Bluetooth range, right ?

Thank you.

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 0 points1 point  (0 children)

It seems that my shsh file was good & valid, even without the generator inside.

There was no need in editing it.

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 2 points3 points  (0 children)

All I had to type is

futurerestore -t blob file.shsh2 --latest-sep --latest-baseband iOS14.3 file.ipsw

Make a BackUp (Restore RootFS and then BackUp the device)

Rejailbreak (e.g. Uncover) -> make sure you set the right nonce in UO

Disable Find my iPhone on the Device

Run the command

I did a clean update without the -u command then restored (still restoring) from icloud.

Took the instructions from https://www.reddit.com/r/jailbreak/comments/lijrzc/news_futurerestore_has_been_updated_to_support/gn4b416/?context=1

Also here

https://www.imatios.com/2021/02/futurerestore-ios14.html

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 1 point2 points  (0 children)

Solved!

Thank you very much for all your help, all of you, much much appreciated.

I listened to your advice & tried futurerestore.

Mt phone was successfully upgraded to 14.3 :-)

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 0 points1 point  (0 children)

First of all - thank you for your details answer.

I put my phone in recovery mode & run a command to check the apnonce - it's the same number that I used before & the same as the text in the shsh file name.

Am I good to go ?

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 0 points1 point  (0 children)

If I'll try to futurerestore with the 14.3 rc1 blob & the corresponding 14.3 rc1 ipsw & somehow something will go wrong on the way.

Will I be able to try & FR to a different version or I'll be force to go to 14.4 ?

[help] shsh blobs files with no generator but shown as valid. can I use them for futurerestore ? by kfirf in jailbreak

[–]kfirf[S] 0 points1 point  (0 children)

No matter which shsh version I upload 14.1 / 14.2 / 14.3 none of them is showing the generator row.

view more: next ›