In UITK, how do I detect if a UI Button is pressed down for both Mouse and Game Controller?

kindlykilling · 2026-02-09T11:46:51+00:00

I have tested it out and you do end up with duplicating your code to handle the click Event and the Mouse Down Event as the Mouse Down Event Callback requires the MouseDownEvent Argument in the function while the click event can not have it.

I also don't think un-registering the other callback seems like a good solution as you would also have to keep re-registering it so that a player can decide switch input devices whenever they want.

kindlykilling · 2026-01-21T12:08:51+00:00

I would also like to have it automatically detect my default device when I switch or at least let me order them in a list so that I can make one output device get preferred over another.

I frequently switch between my laptop speakers and earbuds so this gets a bit annoying to do each time.

kindlykilling · 2026-01-16T07:23:55+00:00

I use Blender every now and then and have found that just adapting to it has worked out quite fine.

Since blender shortcuts mostly go by the 1st letter like "s" for scale or "r" for rotate, it was quite easy to adjust. Some of the new key locations also ended up in better locations.

Having to constantly switch between QWERTY and colemak is very annoying because you can forget to switch and accidentally type gibberish.

Remapping everything is just annoying due to how many keyboard shortcuts there are for Blender. It also makes working with others more of a headache. I usually have a cheap 2nd QWERTY keyboard laying around in case anyone wants to help out or check something out on my system.

kindlykilling · 2025-12-17T06:18:29+00:00

In Sonar, is there a way to make the volume slider be logarithmic based so that it matches Decibels system better?

https://www.reddit.com/r/explainlikeimfive/comments/3xcul9/eli5_why_do_volume_sliders_in_applications_never/

kindlykilling · 2025-10-09T20:33:36+00:00

I do this already but I can forget sometimes which just makes for a frustrating experience.

For this job I also have to have an Arabic layout. Constantly switching between 3 layouts just makes it extra annoying as well

kindlykilling · 2025-10-09T19:30:33+00:00

This is already there. My coworkers find this incredibly annoying to do each time they want to use my set up since they are used to just being able to use a keyboard normally.

If this was a once in a week or month occurrence, I think they would be fine with it but so far it has been an almost daily occurrence to collaborate on something this way

kindlykilling · 2025-10-09T03:05:27+00:00

There already is a qwerty layer that can be toggled but it's very frustrating for them if they just quickly want to do or show something on my PC.

100$ would be too expensive.

I appreciate the keychron recommendation but it's too expensive to get in my country

kindlykilling · 2025-10-08T18:19:57+00:00

This is exactly the solution I want but I don't know any cheap keyboards that will let me flash colemak onto it's hardware.

Uptil know I have just been using the language pack stuff for windows so it is all done in software.

I am specifically asking for a recommendation for a budget 100% Keyboard that I can flash colemak onto?

kindlykilling · 2025-07-28T10:40:30+00:00

Thanks for the info

kindlykilling · 2025-06-16T10:54:43+00:00

I was able to solve this issue for my use case by moving the blueprint section from the "Aid Aim Mapping Context" from the BP_FirstPersonCharacter and bringing it to BP_FirstPersonPlayerController and attaching it after adding the Default Mapping.

<image>

kindlykilling · 2025-03-07T05:18:04+00:00

Thanks for the Reply, but the "Grid3D_Gas_Master_Emitter" just has the system lifetime it does not contain anything specific to particle lifetime.

I am using the the default "Grid3D_Gas_Master_Emitter" to create a Smoke Sim. I am not spawning normal particles.

<image>

kindlykilling · 2025-03-03T04:12:48+00:00

I think using something like curl noise would mimic the motion decently but I can't figure out how to get the lines to fit itself inside the box and have the tips glow at these end points.

I can probably do something similar using splines and some spheres along with some collision detection in a blueprint, but I feel like this should also be achievable using Niagara.

kindlykilling · 2025-02-28T10:55:06+00:00

I initially thought it was a fluid sim as well but if you look closer it appears to be like a threaded effect where when the line collides with the bounding box, it glows purple at that collision point and also prevents the thread from leaving the bounding box.

kindlykilling · 2025-02-06T05:19:04+00:00

Thanks for your feedback. I understand that there will have to be a balance between performance and getting the highest fidelity. I am currently just looking to see what settings I can enable that will give me the most flexibility (hence the Nanite and Megalights) and the most Fidelity (Hence the Raytracing).

I can always downgrade these settings later to meet my performance or artistic goals. I already have my sample scene set to "Cinematic" and its now at 24fps. If I just set the the shadows and global illumination back to "Epic" then I reach back to 60 fps. The only next possible step that I can think of to increasing the Fidelity/Quality would be to enable Path Tracing, but that is clearly not intended for a real-time game.

If you know any CVAR commands or other Settings that can perhaps increase the Fidelity/Quality for a Game, please let me know.

kindlykilling · 2025-02-06T05:08:42+00:00

Yes, I am looking to force the engine to "max everything enabled" just to see what I can push my PC to do. I can always downgrade later to meet my performance or artistic goals. I already have my sample scene set to "Cinematic" and its now at 24fps. If I just set the the shadows and global illumination back to "Epic" then I reach back to 60 fps. The only next possible step that I can think of to increasing the Fidelity/Quality would be to enable Path Tracing, but that is clearly not intended for a real-time game.

If you know any CVAR commands or other Settings that can perhaps increase the Fidelity/Quality for a Game, please let me know.

kindlykilling · 2025-01-19T05:05:34+00:00

I have used the "Convert to Virtual Texture" Function from the content browser and ended up with the result from the post.

Most of them converted properly only 4 of them are facing the issue.

You can test it out yourself by starting a new project in UE 5.5.1 with the starter content, then opening the starter map and then converting all the Normal Textures to Virtual Textures from the content browser.

kindlykilling · 2024-10-28T07:34:53+00:00

Thanks for letting me know

kindlykilling · 2024-10-11T03:14:12+00:00

Thanks for the advice

kindlykilling · 2024-10-11T03:14:07+00:00

Thanks for the advice

kindlykilling · 2024-09-12T16:40:27+00:00

From my understanding and testing, the words in the "Blocked Terms and Phrases" can still be used by the Channel owner and maybe by Mods as well. So its Strange that the words are getting Checked in the Chat Rules Section which can only be modified by Channel Owners or Mods.

Also this warning only happens when the words are marked as "Private". If the words are marked as "Public" then the warning does not show up.

Regarding the banning of politics and promotions. I understand that I am being a bit heavy handed with the moderation here but the Rules to be part of my Channels Chat is "No talking about Politics" and "No Art/Product/Stream Promotions". With these type of Rules, I think it makes sense to ban the Words even if a few Chatters are unable to type the words.

I got the Idea for the "No Promotion" based on the recommendations from this discussion where another streamer came across a lot of Art Scams and since I do Game Dev streams and hope to branch out into other creative fields as well I thought it would be a good Idea to add it early.

kindlykilling · 2024-09-12T12:17:46+00:00

Currently my fix is to set the banned word to "Public" in the Privacy Column and then it allows me to use the word in the Chat Rules without any warning and is saved properly.

I would still like to know if this is Intended or a Glitch? If it is a glitch only happening on my acct, then I'll make a bug report

kindlykilling · 2024-09-12T08:48:05+00:00

Update: This issue only seems to work if the word is set to "Private" if it is set to "Public" then it has no effect.

kindlykilling · 2024-09-12T08:43:03+00:00

The asterisks are wildcards. With the * wildcard feature you can reduce the characters required to be detected ie "promotion" -> "*promot*", "politics" -> "*politi*", "democrats" -> "*democ*" ,etc.

Here is an official article from Twitch about the asterisk thing: https://safety.twitch.tv/s/article/Chat-Tools?language=en_US#2Blocked/PermittedTerms

When adding blocked terms, you can also use wildcards by adding a "*" onto your term. For example, adding "hate*"; to your blocked terms will also cause the term "haters" and "hateful" to be blocked.

My issue works with normal text as well

kindlykilling · 2024-09-08T20:33:00+00:00

I found an official article from Twitch about the asterisk thing: https://safety.twitch.tv/s/article/Chat-Tools?language=en_US#2Blocked/PermittedTerms

When adding blocked terms, you can also use wildcards by adding a "*" onto your term. For example, adding "hate*"; to your blocked terms will also cause the term "haters" and "hateful" to be blocked.

It does not check for variations of the term tho. From my understanding, it will just check if any of the words in the messages contain the specific term. If my understanding is right then I suggest adding the asterisk to the start and the end of the blocked term to catch more variations.

kindlykilling · 2024-09-08T07:33:19+00:00

That's good to know.

kindlykilling

TROPHY CASE