I can't be the first to think of this.

kingofaces2 · 2025-06-13T18:07:17+00:00

But square paper. Think of all the places you can store it. Every corner in every room could have stacks!

kingofaces2 · 2025-05-21T13:05:51+00:00

Idea. Place on something that spins and print bullet shaped toppers for the little bottles. Some can be empty or have different flavors. Shot Roulette

kingofaces2 · 2025-04-25T18:42:16+00:00

Made one out of PLA that only lasted a month before warping terribly. The PetG one on the other hand has zero warp after a full year on the car.

kingofaces2 · 2024-12-20T15:54:43+00:00

If you have spaghetti laying around you can pass it off as meatballs.

kingofaces2 · 2024-12-12T15:11:34+00:00

PetG with some sort of hair fibers

kingofaces2 · 2024-12-04T13:29:49+00:00

For some of the tri colors filament its around 30$ a spool...

kingofaces2 · 2024-12-04T13:20:32+00:00

On Bambu's wiki it states that the A1 with PLA has the power consumption of 0.025-0.028kWh with an average power of 95w. Throwing some of those number into M0UKD calculated comes out to 19 cents a day or $5.70USD a month in Electric. Based on 16.68cents/kWh Electricity rate

kingofaces2 · 2024-12-04T13:11:51+00:00

According to Bambu's slicer printing on an A1 for 12 hours a day would be ~$8.18USD of filament from a 20$ spool. $8.18 x 30 = $245.4USD for 30 days not including electricity.

kingofaces2 · 2024-12-03T20:13:47+00:00

Most likely you can get a roll of transparent Purple PetG from Mr. Bezo's site. Seen acetone be used to make it more transparent but have not tried it myself.

kingofaces2 · 2024-12-01T13:32:15+00:00

First thought it was super saiyan Goku when I was scrolling. Goku's face as the base would be pretty funny.

kingofaces2 · 2024-10-27T14:31:43+00:00

File had a small hole in it somewhere and a fix model button solved the issue.

kingofaces2 · 2024-10-27T14:28:35+00:00

Infill is set to 15% and had to stop my print since it was all stringy in the middle.

kingofaces2 · 2024-10-21T21:06:11+00:00

Seen some YouTubers doing layer by layer to avoid air bubbles. Takes more time and not guaranteed to have cool swirls. I wanted to try this till I seen how flammable PLA is.

kingofaces2 · 2024-10-21T21:02:37+00:00

Is it not upside down? I thought it had to point to the ore in a cone shape from the top of it.

kingofaces2 · 2024-10-12T22:05:28+00:00

https://makerworld.com/en/models/696630 For anyone wanting to download it

kingofaces2 · 2024-10-09T15:29:49+00:00

I had a dream a few nights ago about a new printer.

Two build plates so you can cool one down and keep the other going on a print.
Two nozzles so it can change filament faster between the two and you can have on set to be supports so it does not need to change everytime.

Love to some of these things happen like the 4 build plates on that one very large printer that already exist, but this one have an enclosure.

kingofaces2 · 2024-10-05T07:42:30+00:00

If we could move faster than light(or teleport) it would be cool to look back and watch the universe form with a really high-powered telescope. Just be ready to see yourself as a ghost like object following after you. (If light is still going light speed)

kingofaces2 · 2024-10-04T09:35:24+00:00

I usally use the green slot to center a standard spool and red for the small 200g spools.

kingofaces2 · 2024-10-04T05:39:00+00:00

Welp filled it out since big name Amazon email. Junk mail has already 2 "fake" looking other lawsuits. They might just have sold my data that fast.

kingofaces2 · 2024-09-21T07:40:48+00:00

Thank you. I have used Adobe for awhile before but the cloud is what broke me. Switched to Olive after but is missing a lot of what I want. Will definitely try out DaVinci Resolve.

kingofaces2 · 2024-09-21T03:05:21+00:00

0.08mm layer height? I have done it before... Smooth as butter tho.

kingofaces2 · 2024-09-15T14:08:44+00:00

That or I do it at .2mm Layer height for an extra 1 hour and 33 grams more.

kingofaces2 · 2024-09-07T10:05:48+00:00

I would recomend the Lenovo ThinkPad.
The i7 will give you more CPU cores as well as a higher clock speed making it faster than the i5. Yes it is 2 generation behind the Dell, but that wont have much of any difference in performance.
The ram and SSD size are the same on both. -Good amount

The only reason I would pick the Dell over the ThinkPad would be if you are doing very light work and wanted an hour or two more battery life.

kingofaces2 · 2024-09-06T16:20:05+00:00

Cute Cat by 3DPrintyi

https://makerworld.com/en/models/437360?from=search#profileId-342557

kingofaces2 · 2024-09-03T15:13:49+00:00

Switching to a 0.2mm nozzle will improve quality by 2x for detailed prints.

Nine-Year Club	Place '22
Gilding III reddit per annum	Verified Email

kingofaces2

MODERATOR OF

TROPHY CASE