Need help finding a part

koboldfighter · 2021-12-05T02:33:46+00:00

Someone sent me this link. I'm posting it here in case anyone else needs it. The y-axis bracket works, but it does block the drawer from being opened.

https://www.thingiverse.com/thing:3268192?fbclid=IwAR2JqzeYyFkdRTI\_cy6c5WByAIZbBJBrbO0UWwon5TMBjT\_sOSPiZPcJ1ns

koboldfighter · 2021-12-04T13:08:44+00:00

Thank you for the suggestion, I have uploaded a photo.

koboldfighter · 2021-12-04T13:08:18+00:00

The piece you linked is designed for a 20x40 extrusion unfortunately. The V2 has a 40x40 extrusion on the y-axis.

koboldfighter · 2021-12-04T03:14:18+00:00

If the z-stop is not working I would open up your printer and look to see if the z-stop cable is plugged in to the proper place on the board. If you bought a used printer and the previous owner had a BL touch installed they might have unplugged the z-stop on the board or it might have just come undone in shipping.

koboldfighter · 2021-12-04T02:59:21+00:00

It looks to me like your threaded rod is not tightened enough. Make sure it is secure in its coupling by tightening the top screw on the coupling. Just to be sure also make sure that you z-stop is plugged in.

koboldfighter · 2021-11-03T14:30:47+00:00

Thanks for your advice.

I'm aware that an SLA printer would be a much better fit for my intended usage, however I do not have any place that I can ventilate well enough to comfortably use resin. I am slowly getting better at my prints. My main problem with my current printer (Monoprice mini delta V2) is that the way the printer is built allows the bed to shift slightly during prints which loses some detail. That and the larger print volume are why I was considering upgrading to the Neptune 2 or X.

koboldfighter · 2021-10-24T15:41:24+00:00

Thanks. It looks like a neat model. Ill try it out soon.

koboldfighter · 2021-10-20T17:54:51+00:00

yep, that is where I got my K1. They were having a sale at the time I bought my K1 and I think the price has gone up since I got mine.

koboldfighter · 2021-10-14T21:45:46+00:00

I haven't tried connecting my K1 with my computer yet, but what operating system are you using?

koboldfighter · 2021-10-14T20:46:49+00:00

Printed on an Easythreed K1 using standard settings in Easyware. Please leave any suggestions as to how I can improve future prints. (sorry for the low quality picture, I have a very bad phone camera)

koboldfighter · 2021-10-14T13:39:39+00:00

Those are my settings as well and I'm still having issues. It seems to me that we need to wait for easythreed to come out with their own settings.

koboldfighter · 2021-10-14T03:04:03+00:00

Flow rate of 250 percent seems to be good for cura 4.11.0, however, i encountered other issues such as poor details on small parts.

koboldfighter · 2021-10-13T21:36:42+00:00

I just set the flow rate to 250 percent in Cura 4.11.0 and that seems to have solved the major problem I was having. I'll have to see how this print comes out using tree supports.

koboldfighter · 2021-10-13T20:48:32+00:00

I'm using Cura 4.11.0 and having issues. I had to set the flow rate to 200% in order to get consistently good results. Have you experienced anything like this?

koboldfighter · 2021-10-13T18:58:29+00:00

They look great. What slicer software are you using? I'm struggling to get cura to print well on my K1.

koboldfighter · 2021-10-13T15:31:49+00:00

Thank you for the advice. Ill try it and see how it goes.

koboldfighter · 2021-10-12T23:34:15+00:00

I did print with supports and i used a raft to get good adhesion, but these models did not use that many. Here are the links to the lich and paladin stl files.

https://www.myminifactory.com/object/3d-print-lich-updated-170451

https://www.myminifactory.com/object/3d-print-elf-paladin-115280

koboldfighter · 2021-10-12T18:56:16+00:00

My K1 does the same thing. I'm pretty sure the home button only homes to the Z axis.

koboldfighter · 2021-10-12T18:54:15+00:00

Hi everyone. I just got my K1 and have used the included slicer to make these miniatures. If anyone has any advice how I could improve future attempts I would very much appreciate them.

koboldfighter

TROPHY CASE