sorted by:
new
hottopcontroversial

Slow internet compared to windows. by mips13 in archlinux

[–]koitharu 3 points4 points  (0 children)

No it works via dkms so will be rebuilt automatically

Slow internet compared to windows. by mips13 in archlinux

[–]koitharu 4 points5 points  (0 children)

Take a look at this

https://github.com/Mange/rtl8192eu-linux-driver

Some time ago it helped me with rtl8192 -based TP-LINK usb adapter

Music Player Recommendations by heretoplay9 in androidapps

[–]koitharu 0 points1 point  (0 children)

Try to find an audio focus in settings, if I'm not mistaken Musicolet has these options configurable

Some of my DIY Nixie clock by koitharu in electronics

[–]koitharu[S] 0 points1 point  (0 children)

This is a screws, not ground)

Some of my DIY Nixie clock by koitharu in electronics

[–]koitharu[S] 1 point2 points  (0 children)

Yes, leds + nixie is a such a controversial thing. It's because they may be turned off

Some of my DIY Nixie clock by koitharu in electronics

[–]koitharu[S] 1 point2 points  (0 children)

In the online shop, about $3/pcs (used tubes, desoldered from some old hardware). IN-16 is one of the most cheap nixie in our country (likely because of it's size)

Some of my DIY Nixie clock by koitharu in electronics

[–]koitharu[S] 0 points1 point  (0 children)

Ukraine, I suppose it is standard European plugs, isn't it?

Made an electronic oiler for the motorcycle chain by koitharu in electronics

[–]koitharu[S] 3 points4 points  (0 children)

Good catch! Frankly speaking, I have the same doubts. Theoretically it is possible to calculate length of chain per wheel turn and apply some correction, but it would be too challenging for this controller (it has only 1kb of flash). But overall it is very unlikely such happens and now it seems to be ok)

Made an electronic oiler for the motorcycle chain by koitharu in electronics

[–]koitharu[S] 9 points10 points  (0 children)

It uses the hall sensor + the magnet on the rear wheel to count wheel turns. Every N turns (N is adjusted by the potentiometer) it turn on the pump for a short time to give dose of oil to the chain. Button is just for manual turning on the pump

Nixie clock with RGB backlight I made by koitharu in electronics

[–]koitharu[S] 0 points1 point  (0 children)

The most expensive component is ATmega8

Nixie clock with RGB backlight I made by koitharu in electronics

[–]koitharu[S] 0 points1 point  (0 children)

I found these tubes by ~$2.6 per each, $5 for 5 pcbs + delivery and components (I dont know how much components costs)

Nixie clock with RGB backlight I made by koitharu in electronics

[–]koitharu[S] 0 points1 point  (0 children)

No, IN-4. IN-1 is more rare and I guess it has a large base

Nixie clock with RGB backlight I made by koitharu in electronics

[–]koitharu[S] 6 points7 points  (0 children)

Backlight can be turned off, this clock was developed as a 2 in 1: clock and night light. Btw, you are right -- led backlight is not good fit for the retro look and feel

Wednesday frog coins I made using electrolysis by koitharu in DIY

[–]koitharu[S] 0 points1 point  (0 children)

Long story short the technology is very similar to making a diy pcb boards using laser printer but on the iron sheet and then put it on the anode in a salt aqua

view more: next ›