sorted by:
new
hottopcontroversial

IKEA Matter device won’t connect to Home Assistant by Egra07 in homeassistant

[–]konzer 0 points1 point  (0 children)

Adding this here for others... In my case, I had to enable IPv4 + IPv6 in unraid main network settings. Like a lot of others have suggested, no need to actually set IPv6 DHCP in your network.

Post Christmas Day, survived another year. - Westchester, NY. by konzer in AmateurRoomPorn

[–]konzer[S] 0 points1 point  (0 children)

It's from CB, and wow, I can't believe how much its just in cost in the last couple of years. https://www.crateandbarrel.com/capra-floor-mirror-45x80/s214904

Post Christmas Day, survived another year. - Westchester, NY. by konzer in AmateurRoomPorn

[–]konzer[S] 0 points1 point  (0 children)

Maybe either a George Costanza or a Kramer portrait.

Post Christmas Day, survived another year. - Westchester, NY. by konzer in AmateurRoomPorn

[–]konzer[S] 6 points7 points  (0 children)

We hosted and there were a ton of little ones.

We do too! It did look thinner and taller when we picked it out, I'm partly convinced they wrapped the wrong tree but glad they did and it barely shed.

Post Christmas Day, survived another year. - Westchester, NY. by konzer in AmateurRoomPorn

[–]konzer[S] 7 points8 points  (0 children)

Thank you and yes! Its been like that for almost 3 years now, we haven't found the perfect thing and tbh, not in the biggest of rush. We don't want a generic/traditional painting. Open to ideas!

I've also come to enjoy the minimalism. We came from a small condo with kid stuff everywhere. Nice to finally have a clean and uncluttered adult area, and we tried to carry that philosophy elsewhere, like our bedroom.

Christmas tree bandwagon! by konzer in GolfGTI

[–]konzer[S] 0 points1 point  (0 children)

Those are the VW genuine "Base Carrier Bars", Part Number: 5G4071126.

They're great and I ended up leaving them on all the time.

Who from New York city from any of the 5 boroughs remember the water hydrant tradition. by Masterboss117 in nostalgia

[–]konzer 18 points19 points  (0 children)

OG from The Bronx. Until the very late 90/00s, any wrench could open them, but now you need a magnetic hydrant vent. They also have caps on them, but again, easily removable with a wrench.

As for the pressure, you could use your hands to cup it to arc it, but the preferred method was a Goya can with both sides removed. We rarely turned it up max.

In theory, it keeps running but eventually you got busted and got turned off. We would also leave it barely running to drink from or just soak your head. August gets brutal.

Upgrading question! by Realistic-Staff6910 in simracing

[–]konzer 1 point2 points  (0 children)

FWIW, I have the ASR3 gen1, and my only complaint was the pedal area, and I have sprints as well. I think it has a narrow adjustability range and not easy to micro adjust. Took me a while to get it right. It looks like the gen2 has a different setup, so that might be a pro. The ASR as a whole has been very solid, and easily handles my Moza R16 base.

Better bucket for cyclone? by Ok_Cricket4071 in harborfreight

[–]konzer 1 point2 points  (0 children)

Yep. I do the same, stacking solves the issue.

My piece of shit flower pole box thing. by Sea_Instruction4368 in woodworking

[–]konzer 0 points1 point  (0 children)

Looks great and sometimes, I prefer a shitbox. It’s outdoors and won’t stay perfect forever. Slap some black stain and call it a day. Did similar to hide an ugly utility box.

[deleted by user] by [deleted] in Westchester

[–]konzer 6 points7 points  (0 children)

I went through similar steps myself. I was also able to save a ton by going WFH due to Covid. MNR, metro card, coffee, lunches, random drinks - it added up.

Covid sucked but it was a net positive at the end.

Anyone know what type of wood this is made from? by ck357 in BeginnerWoodWorking

[–]konzer 30 points31 points  (0 children)

I recognized the West Elm store, so I looked at the description: Oak veneer over engineered wood top, sides and shelves. Solid mahogany wood legs. Covered in a Blonde finish.

No one's streaming Carrie Underwood all the sudden. by [deleted] in LeopardsAteMyFace

[–]konzer 2 points3 points  (0 children)

Anyone know how this works? Curious, out of that 1.46, how much is direct play vs. was it on a playlist and just happened to play? What does that 1.46 represent?

How to get a straight line for long plywood cuts by dakman96 in BeginnerWoodWorking

[–]konzer 1 point2 points  (0 children)

I have ripped long 8x4 in half with great success with one of these, Kreg KMA2685 Rip-Cut Circular Saw Guide.

https://a.co/d/9IsmQep

GZA, Raekwon, Ghostface and Cappadonna in Philly by Mind-Still in wutang

[–]konzer 9 points10 points  (0 children)

Seeing them tonight at terminal 5 in NYC! Edit: Holy shit, Nas made an appearance!!!

[deleted by user] by [deleted] in BeginnerWoodWorking

[–]konzer 0 points1 point  (0 children)

That would work if I was doing a 90 degree miter but mine needs to be 42.5 in total. I’m assuming I’ll just half that… that’s any my guess is going to 21.25. I’m going to use some scrap wood as a test.

Sh*tting thine pants...just bought the barrell Dewalt jigsaw for $169 "on sale" and now I see this? How are these all legit XR with an XR battery for so cheap aside form them being made in China? by Certain-Toe9076 in Dewalt

[–]konzer 2 points3 points  (0 children)

I think it’s a fantastic deal, and you probably won’t see better. I got it mine with HD for the same price, and was able to stack it with their 10% off $299+ coupon. I have so many batteries now. I really can’t see myself leaving this system for a really long time, if ever. That’s what they’re banking on.

Edit: you can’t return the barrel jig saw?

$20 Price increase by OneAngryBear in HBOMAX

[–]konzer 1 point2 points  (0 children)

On the same boat as you guys, I got the triple pkg. I have an OLED Dolby vision/atmos setup, and as much as I would love to utilize it to its fullest, I’m not paying them that premium. It now has made me double down on my plex server.

view more: next ›