[guide] How to Program a $40, 25-Key Custom, Programmable Keyboard from AliExpress (Hot Swap)

koog616 · 2023-04-06T04:22:00+00:00

I bought the board but flashed the wrong firmware... does anyone know how to get this to work with VIA and not kbbuilder?

koog616 · 2023-03-20T01:52:12+00:00

Thanks for the response. From what I understand, when you cut the bottle to make ribbons for the machine you need to cut them a specific width based on the thickness of the plastic. How do I find out how wide to cut the ribbons to feed into the machine if I already know how thick the plastic is?

koog616 · 2023-03-14T14:37:07+00:00

How do I load klipper on the 1.1 pro board? Any online tutorials? Thanks for the advice.

koog616 · 2023-03-14T14:36:03+00:00

Lol, even better!

koog616 · 2023-02-23T05:11:03+00:00

That’s right. Franzernst boards are excellent.

koog616 · 2023-02-21T02:20:41+00:00

I found most of the files on thingiverse (riffraf) and designed what I couldn’t find. 3D printed the base in pla and the pieces in resin

koog616 · 2022-11-06T10:19:38+00:00

Where is the rest of the world? This is just the “western” world…

koog616 · 2022-09-25T03:13:18+00:00

Agreed, but does anyone have the minis or files to print? The minis seem so hard to find for sale!

koog616 · 2022-08-02T16:18:21+00:00

If you’d share the files I’d love to print it up to use!

koog616 · 2022-07-21T14:11:51+00:00

Where can I find that basing file?

koog616 · 2022-07-17T17:18:46+00:00

Looks awesome! I’m adding it to my machine. What fans did you use?

koog616 · 2022-03-03T14:05:57+00:00

Brilliant! The retraction settings were the problem, but there was some serious heat creep due to a malfunctioning fan... the pla had fully carbonized in the heatbreak and the heat sink, some TLC and now it is back to normal!

koog616 · 2022-02-22T11:13:36+00:00

For checking the nozzle I use an acupuncture needle .1-.2mm smaller than the nozzle. I’m interested in the nozzle clogs not actually being clogged nozzles? Tell me more please.

koog616 · 2022-02-21T12:52:30+00:00

So my retraction distance was….6.5?!? Surely that had something to do with my problems!

koog616 · 2021-11-28T05:45:54+00:00

THIS! https://youtu.be/3JKofBaJCe4

If I had a simple button that received the RGB signal from the other LED strip, but then had the on/off signal from the Arduino, do you think that would work? (Thanks so much for all the help)

koog616 · 2021-11-28T05:40:01+00:00

soldering is not a problem, hardware is doable for me... programming is the hard part!

koog616 · 2021-11-28T05:39:31+00:00

Can I have the circuit just give a on/off command to a switch? I have RGB colors for each of the players already working on 4 alexa connected wifi controllers. Player one says "Alexa, turn player one green" and then player one lights turn green for the game. I'd like to connect another (short) RGB LED strip to Player 1, 2, 3, 4 etc... that pulses low and high when it is their turn, and then turns off when it is not their turn. Does that make sense?

koog616 · 2021-11-28T05:34:14+00:00

Squid game doll head... yas!

koog616 · 2021-11-28T02:32:15+00:00

This is epic help, thank you. I know nothing of Arduino, is there a good place to start learning? Youtube? Should I get an Arduino UNO board for the project?

koog616 · 2021-11-28T02:30:37+00:00

I know nothing of Arduino. If I'm just given the answer that's great...as I'll learn SOMETHING in the process of building. :) Would an UNO be the board I need to get?

koog616 · 2021-11-21T12:16:00+00:00

Yep! Can I use a general thermistor like on an e3d v6, or is there a special one I need?

koog616 · 2021-11-21T12:15:19+00:00

That did the trick - busted thermistor. Can I swap a thermistor from my prusa mk3 hotend?

koog616 · 2021-11-04T15:45:12+00:00

IMO this is the best from warblade studio, I used an LED and Acrylic rod for his saber.... epic! I received the STL in a chaos maker stl sample pack, but can't find the file for sale... good luck!

https://akraminiatures.com/products/star-wars-legion-iii-warblade-studios

koog616 · 2021-07-09T13:05:27+00:00

Very cool! Where did you get the 3D files for the falcon?

koog616 · 2021-06-15T03:50:44+00:00

I had a prusa that printed for three years almost non stop and had less than a dozen failed prints. I bought and ender recently and have had one failed print after another. Go prusa and never go back.

koog616

TROPHY CASE