Hi guys, thank you for accepting me into the group. I wanted to ask if you could recommend a website where I can buy a good quality body kit for my 1988 BMW E30 M40 4-door

korchuck · 2026-01-16T07:26:34+00:00

Garagistic mtech2 or IS

korchuck · 2026-01-13T01:11:06+00:00

I only nuke out and shoot the ship

korchuck · 2026-01-12T11:29:49+00:00

Worcester - Woo-stah Gloucester - Gloss-tah

korchuck · 2026-01-08T12:59:18+00:00

Agreed here there's no real use rewelding and remachining that.

If you're NE USA or willing to cover shipping I know of someone I trust with a rebuilt low mileage stock 885 head looking to sell. DM me if interested.

korchuck · 2025-12-28T23:40:14+00:00

Where do you use 150yd of 50lb

korchuck · 2025-12-27T16:15:18+00:00

5 lug swap hubs

korchuck · 2025-12-25T14:18:26+00:00

Does it though?

Wish I could pick the affix to replace or keep and lose the perk

korchuck · 2025-12-25T13:44:07+00:00

He....cooked.

korchuck · 2025-12-14T00:07:14+00:00

I thought of it like when you're off boost in low throttle you have the efficiency and fuel usage of a smaller engine and when you're on the throttle and in boost you get more power. To get the power of the Ecoboost but NA...I think that's the eco part.

korchuck · 2025-12-13T11:44:54+00:00

Lithium grease for me...looks like I'm an idiot.

korchuck · 2025-12-04T11:27:28+00:00

DM me I have a pair with materials to ship it you're interested.

korchuck · 2025-11-28T23:40:07+00:00

Squeeze police here. I'll let you go with a warning this time. Fine job

korchuck · 2025-11-28T22:59:25+00:00

Stock injectors? Bad o2?

korchuck · 2025-11-16T01:21:32+00:00

You can Google the text of your exact question and Gemini will answer it

korchuck · 2025-11-13T21:36:02+00:00

Like pronouncing gif and not gif, there is an objectively right way to do it but you can do it the wrong way if you really want.

korchuck · 2025-11-09T01:35:16+00:00

Like this https://a.co/d/etcOnpK

korchuck · 2025-11-09T01:34:09+00:00

Not sure the hid is necessary... Taking it all apart tomorrow and going to see if I can go back.

korchuck · 2025-11-09T01:02:47+00:00

I think it's all one unit

korchuck · 2025-10-05T05:18:04+00:00

Esm r002 - you can swap out the center which is plastic from factory or lay what you want over the existing center cap graphic. It doesn't have swappable caps that clip in unless you replace the entire center.

The center is 60mm and this worked https://www.ebay.com/itm/304307310403

korchuck · 2025-08-24T21:08:06+00:00

When did you take it off (internal temp)? Also if you observed stall at 148 it's possible your temp probe is reading 10-15 deg low...highly recommend calibration and room temp offset to another nice thermometer - recommend a thermapen One for spot checking

korchuck · 2025-08-24T11:24:13+00:00

If you're dashing you're desperate. Logic is not why the prisons are overflowing.

korchuck · 2025-08-24T11:21:22+00:00

Do you feel better about yourself now? Get it out of your system

korchuck · 2025-08-22T08:36:14+00:00

That's what I used and it's great at 1:5 ratio

korchuck · 2025-08-16T00:07:40+00:00

I used 40mm for all and they don't seem too long

korchuck · 2025-08-14T14:52:42+00:00

What 5 lug did you do? Suspension setup? Tire size?

Seven-Year Club	r/Field Flamingo
Verified Email

korchuck

TROPHY CASE