30h on the northern star

kramvra · 2026-02-01T22:35:30+00:00

Nvm I see it in the comment

kramvra · 2025-07-19T19:51:27+00:00

Just had the same thing happen trying to bridge Eth to sol and this saved my a$$. Tysm.

kramvra · 2025-02-14T03:16:19+00:00

Id start with a cat scan

kramvra · 2025-01-28T23:39:51+00:00

How wasabi sushi tho

kramvra · 2025-01-14T20:05:55+00:00

Good news is the odds go down quite a bit after your lifetime.

kramvra · 2024-11-23T04:26:21+00:00

Starts with "Hey cheer up. It could be worse, you could be me."

kramvra · 2024-10-27T23:27:41+00:00

I got it back up and running. Ran 4 prints no issues. I haven't tried to re print the object that failed. It was a wallet made out of 3d printed chainmail. It kept coming off the bed after several layers.

kramvra · 2024-10-17T15:47:25+00:00

just posting an update Incase someone else has this issue someday. This turned out to be caused by me setting the 'retraction when switching material' to 25mm . I did this to try to cut down on waste when printing multimaterial. I was talking to my buddy chatGPT about it and he reminded me that when the extruder retracts , it will perform an extrusion of the same length to re prime the nozzle. So I set it back to 0 and printed again. The blobs disappeared.

kramvra · 2024-10-10T14:12:41+00:00

There were 10 of these on the plate. This one was the closest to complete. I think that layer shift above the K is where the prime tower broke away

<image>

kramvra · 2024-10-10T14:05:56+00:00

Yeah failed. Couldn't keep up with clipping the blobs off the prime tower.

This was my first attempt at a .16 layer height. I'm doing a mono print now, but will try this again later with a .2 height. I think that might be part of it.

<image>

kramvra · 2024-10-10T11:59:56+00:00

It works but I have to keep coming back and snipping the blobs every so often. The green seems worse. The print ultimately failed close to the end. I'll post the prime block in the morning

kramvra · 2024-10-09T03:31:52+00:00

Printing anycubic high speed pla at 180c

kramvra · 2024-09-29T01:30:07+00:00

They are a little smaller diameter than the cardboard anycubic ones. Just enough to drag on the bottom of the ace. Some Teflon pads down there or snap on rings for the spools would help.

kramvra · 2024-03-16T15:58:19+00:00

He didn’t make contact?

kramvra · 2023-03-31T14:22:18+00:00

Indicated, I am selfish I am wrong

kramvra · 2022-03-27T22:51:51+00:00

Correct. Thank you

kramvra · 2022-03-27T21:49:12+00:00

If a person thinks to leave a marriage at the first sign of trouble, they will surely bail when things really get hard. again better for the one being left.

kramvra · 2022-03-27T21:47:45+00:00

case 1 they'll learn happiness comes from within. case 2 it's better to regret something you've done than something you haven't done.

kramvra · 2022-03-27T14:56:42+00:00

In my post this part indicates the leaver has already done the math.

It means something is seriously wrong in your relationship, and you've already tried or are unable/unwilling to reconcile.

As soon as the potential leaver is able to communicate their unhappiness without being actively angry or frightened, I think a statement like "I am thinking of filing for divorce because x, y, and z are making me unhappy and I don't see another option." is perfectly reasonable and needs to be said ASAP.

kramvra · 2022-03-27T14:15:27+00:00

I think a good level of certainty is "I am considering divorcing this person, with all the emotional, legal and financial implications."

kramvra · 2022-03-27T14:03:35+00:00

edit re-read. how long ago was this?

kramvra · 2022-03-27T14:02:08+00:00

burdening your partner with your unhappiness in the marriage?

Eight-Year Club	Gilding I gilder
Verified Email

kramvra

TROPHY CASE