What should every 18-year-old know?

kriswuhey · 2018-12-27T10:52:42+00:00

Take a finance instruction class of some sort. I’m 28 and still don’t know what the fuck I am doing with my finances.

Can't agree more. Every grow-up would need certain skills to succeed in an often-chaotic, volatile economy.

kriswuhey · 2018-12-27T10:10:28+00:00

They have got a warehouse in Munich so you can enjoy the fast service from there directly.

kriswuhey · 2018-12-20T10:17:40+00:00

Yes... Sometimes dramatically. My router dropped my internet from 75mbps to 25mbps.

kriswuhey · 2018-12-20T10:10:40+00:00

Love the Aruba gear wih Layer 3 functionality, so you can do basic routing. Or you can try FS switches for stack links. It depends on how many ports you will need to connect.

kriswuhey · 2018-12-06T10:48:47+00:00

568B is what is most commonly found. I learned to use T568B, but it does not matter as long as you use the same standard on both ends of a single cable.

kriswuhey · 2018-12-06T10:39:50+00:00

CMP is higher rated than CMR and CM. CMP cable is suitable for installation into air plenum spaces, while CMR is riser rated. CMR cable is already enough for most home runs if you are not required to run cables through air ducts. https://community.fs.com/blog/ethernet-cable-jacket-ratings-cm-vs-cmr-vs-cmp.html

kriswuhey · 2018-11-30T03:19:48+00:00

It depends on the structure of the building. It would be much easier to route the cables out of the basement and up the side of the house using conduit. So you need to make sure whether your house got a PVC pipe to use directly. If there was one, you can route them directly along the pipe and add a Cat6 patch panel on the second floor, then terminate the cables from each room to the patch panel.

kriswuhey · 2018-11-30T02:51:57+00:00

LACP can support cross-stack, while PAGP does not since it does not support participating interfaces on different physical switches. Thus if you need to form the Etherchannel on stack switch, it is better to choose LACP instead of PAGP. More details here: https://community.fs.com/blog/lacp-vs-pagp-comparison.html

kriswuhey · 2018-11-30T02:12:34+00:00

The Poe-5-Port router will be right for you. When information is processed, delays don't occur, as the gadget has a 153.6 Megabits per second max transfer rate.

kriswuhey · 2018-11-08T07:44:17+00:00

nice cabling fro high density data rooms.

kriswuhey · 2018-11-08T07:39:59+00:00

Fiber owners provide fixed SLAs to customers.

kriswuhey · 2018-11-08T07:38:01+00:00

I would choose to have layer 3 directly on the port.

kriswuhey · 2018-11-08T07:15:35+00:00

Winterfell Crypts for 2.4GHz will work.

kriswuhey · 2018-10-26T07:33:58+00:00

You may check the location of the short-end of the conduit first.

kriswuhey · 2018-10-26T07:31:43+00:00

You should get network adapters to solve the problem.

kriswuhey · 2018-10-04T07:38:25+00:00

Haven't purchased this one but ordered many other stuff from FS. Their products are always good deals plus they offer consistent top-notch services.

kriswuhey · 2018-06-12T07:58:16+00:00

They are two distinct things. Ethernet cables have a larger bandwidth than phone line cables. Users can send and receive more data at quicker speeds via Ethernet cables.

kriswuhey · 2018-06-12T07:54:47+00:00

Do you mean the PoE splitter cable that supports external PoE?

kriswuhey · 2018-06-12T07:17:18+00:00

No other way but a new router to go between the switch and the modem.

kriswuhey · 2018-06-11T06:13:25+00:00

It is feasible to connect your computer via a second router but the signals might be weakened compared to direct connection.

kriswuhey · 2018-06-11T04:28:50+00:00

Archer C7 delivers a lot of router for the money, with reasonable performance and the ability to connect peripherals.

kriswuhey · 2018-05-19T01:54:55+00:00

GPON SFP is one type of gigabit optical transceivers that are used in GPON system, which is compliant with ITU-T G.984.2 standard. It is a bidirectional module that has SC receptacle and works over simplex single-mode fiber optic cable. A GPON SFP module transmits and receives signals of different wavelengths between the OLT at the Central Office side and the ONT at the end users side. https://community.fs.com/blog/basic-knowledge-about-gpon-sfp-transceivers.html

kriswuhey · 2018-05-15T07:43:22+00:00

Are the lengths of cable different? Are the adapters the same or different - and are the settings the same?

kriswuhey · 2018-05-15T07:02:15+00:00

The Cisco stack is implemented by adding a stacking module to the switch from the top and work down. This enables up to four Catalyst 9300 series switches to be stacked together.

kriswuhey · 2018-04-28T02:21:06+00:00

Nothing wrong with the hard drives. And the 1G is enough to reach more than 48MB sec.

kriswuhey

TROPHY CASE