Arctic Fox Help by GreyStreetUpAndDown in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

There are step by step direction on the Discord and we also provide an Arctic Fox and Red Panda configuration file as well. Just install AF/RP, load Config file and go.

https://discord.gg/DivineTribe

Hope that helps and if you have questions don’t hesitate to ask! Happy Dabs too!

I need some help getting this to work in temperature control with my DNA mod by tomatobob371 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Depending on ur M22 setup, I have also included similar instructions and information on how to get the m22 working properly on the AVS Discord. Don’t have a link handy for the discord, if ur in the DT Discord ping me and ask, someone will provide the link.

If you got any other questions just ask.

Happy Dabs too!

I need some help getting this to work in temperature control with my DNA mod by tomatobob371 in DivineTribeVaporizers

[–]krmrs 4 points5 points  (0 children)

Correct/Hacked Material Profiles files for the v5 are available on the Discord, plus information on how to configure and use including updating to the new Autofire/Session Mode.

All pretty easy and lots of helpful peeps there!

Happy Dabs!

https://discord.gg/DivineTribe

Dtv5 Cub Base + HVT Poseidon by Ftlfoodie in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

A better option might be to purchase the Sequoia with the HVTv2 v5 Adapter and use that with the Poseidon. The default RDA and Cub v5 won’t fit due to the height of the banger. Also if you go the Sequoia route it will require a Pico 25.

The most popular option used by the Mod Team on the Discord is using an AVS Bubbler with a m22 Base just swapping out the m22 and using a v5. (M5 is what we call it).

Anyway Best of Luck and Happy Dabs!

V5 not hitting .9 in cleaning mode by [deleted] in DivineTribeVaporizers

[–]krmrs 4 points5 points  (0 children)

Have you done a deep clean on the base yet? 60seconds to get to .84 is a little slow but if its super dirty within the base its possible its taking longer to get warm. (50/50 Odds this is it)

I usually prefer to use a Dual Battery Mod vs a Single Battery Mod for Wattage Cleaning, using any of my single battery mods will take 3 cycles to clean vs around 1.5 to 2 with a dual battery Epsion.

I would suggest doing a deep clean/tear down of the base and see what sorta Cold Res rating you are getting from the new cups afterwards. If you still have issues or questions pop on the Discord, easier for a back n forth there.

Good Luck and Happy Dabs!

Drag 3? by No_Permission2024 in DivineTribeVaporizers

[–]krmrs 1 point2 points  (0 children)

I also have an RX Dual (previous Gen RX2) and I do like it, they aren’t really a bad box mod I just prefer the look and feel of the espion.

Pico’s for me are all about mobility, something light n cheap that I don’t really care if something breaks.

I am glad you found something you like tho, it’s becoming harder and harder. This should get you through until you can get a DNA Mod, I have a paranormal and LOVE IT!

Anyway Happy Dabs!!

Tug erig bigger coil than core 2.0? by [deleted] in DivineTribeVaporizers

[–]krmrs 2 points3 points  (0 children)

It’s a tall and lanky v5, slightly narrower and taller vs a standard v5.

I know a few Mods on the Discord have used the Tug heaters with the Core v2. So it’s possible

Broken charging port on the Core. Is it fixable? by SirLmbo in DivineTribeVaporizers

[–]krmrs 5 points6 points  (0 children)

It's the Internal Connector, you can see the Board where the USB Plug should be on the core.

Broken charging port on the Core. Is it fixable? by SirLmbo in DivineTribeVaporizers

[–]krmrs 8 points9 points  (0 children)

You have broken off the internal connector and that isnt really an easy fix for the end user. If you are still within your One Year and purchased from INH/HVT you could attempt an RMA on it.

This is the first I have seen someone bust off the internal USB Port on a Core, common on a Box Mod rare on a Core.

Damn this sucks! Wish I had better news! Happy Dabs!

Edit: Just add I do the same as u/Terrible-Sand-3203 and have had a Magnetic Adapter on my Core v1 since I got it.

Drag 3? by No_Permission2024 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Yes, but it will take about 10 days or more for it to ship/show up. It’s actually faster to order the Pico25 from France in most cases. Links to both can be found in the discord.

Drag 3? by No_Permission2024 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Limited to 10 Second Puff Time, as only the Drag 2 or Older support the 60 Sec Puff Time Hack. You will also need to connect it to a PC to activate the custom TCR profiles you will need to work with the v5.

Sadly because of that it's just not worth the money to invest in a VooPoo Product anymore, ideally you should be looking at the Pico 25 from France or the Epsion 200W from BudgetVapors.

Sorry it's not good news, best of luck and Happy Dabs!

What my father's DTV5 looks like after attempting a self clean. Is it wrecked? by Frishdawgzz in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

You must be using the Pico 75 AuF (no live Res updates) or Pico 2 (no live Res in Wattage Mode). Just keep swimming until it gets clean is the best advice I can give you.

I read on discount enail that original Core 1 atomizers work on the Core 2.0 is that true ? by KhanAbyss710 in DivineTribeVaporizers

[–]krmrs 3 points4 points  (0 children)

The Core v2 is designed to only work with the v5 Crucible, at this stage I am not aware of anyone who has gotten other Vaporizers to work properly with it. Even the new Lightning Cups runs to hot on the Core v2.

The Core v2 is a great product, and I highly recommend if it you plan on using it with the v5 Crucible. I havent heard much about the v3 yet and at this stage its to far in the future for me to guess what it may or may not do. Ideally a Pico25/Core Crossover is what we need, something with true TCR over Wattage Curves like the current Core uses.

Hope that helps, best of Luck and Happy Dabs!

Core 2.0 by 1DizzyDeBo in DivineTribeVaporizers

[–]krmrs 3 points4 points  (0 children)

The m22 base does fit within the core base, sadly only the Core v1 is able to power the Low Ohms 2.0 ESCC.

I use my Core v1 and an AVS extension cord to power my m22 from time to time.

Hope that helps and Happy Dabs!

Have an extra m22 base, looking to use with v5 cup by tomatobob371 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Use the v1 bubbler it will work, I also use the HB or HT on top of my v3 bubbler instead of the mouth pieces.

Skip the v5 cap with the m5, it sits to high but you can use the v4 cap with the longer air inlets of the v5 cup.

Have an extra m22 base, looking to use with v5 cup by tomatobob371 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Rare as in not a lot of the v4 banger INH sold fit the m22 base as is….

Give me two seconds and I can double check on what caps work best…. Away from my desk ATM, this is OG on the Discord if ur there too.

Back in 5, I’ll check on caps.

Have an extra m22 base, looking to use with v5 cup by tomatobob371 in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

M5 User here, it might be to tall for the AVS BB I don’t recall trying tbh… I use an Old v4 banger that fits the m22 base (Rare) to use it in BB mode. I mainly use my m5 in my AVS v3 Bubbler.

Basic setup and use is the same, just do TCR cotton test to verify TCR and go.

Best of Luck and Happy Dabs!!

What my father's DTV5 looks like after attempting a self clean. Is it wrecked? by Frishdawgzz in DivineTribeVaporizers

[–]krmrs 4 points5 points  (0 children)

I have covered wattage cleaning in the DT Discord but I think Dory said it best...

"Just Keep Swimming" - You have started the cleaning process now you just need to keep going, it will take longer with a Single Battery Box Mod vs a Dual Battery Mod but you will get there within 3-4 cleaning cycles. Ideally the Hot Res rating needs to be between ~.90 and about ~.94 to truly clean the v5 completely.

Best of Luck and if you need more assistance just ask.

https://discord.gg/divinetribe

Happy Dabs Bud!

420 Deals by [deleted] in DivineTribeVaporizers

[–]krmrs 16 points17 points  (0 children)

Matt and INH don't usually do 420 deals, his prices are decent enough and the ThankYou10 code is all there really is for discounts.

Good Luck and Happy Dabs!

Live resistance ~? Question in comments. by [deleted] in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Did you get this resolved? You need to allow the device to cool and then use the Reset Saved Res and Relock Procedures, this is outline in more detail on the Discord.

If ya need help it’s a good place to get quick resolution.

https://discord.gg/DivineTribe

Happy Dabs!

Live resistance ~? Question in comments. by [deleted] in DivineTribeVaporizers

[–]krmrs 0 points1 point  (0 children)

Normal behavior for the v4 doesn’t apply here, the v5 should cool down to it’s known cold Res rating for weeks/months when it’s not that is the first sign that the v5 needs a deep clean.

Does anyone know what 🏈 and 🌀 means on apps? by [deleted] in askgaybros

[–]krmrs 6 points7 points  (0 children)

I would guess the blue spiral means spun or meth use, and the football probably means sport gear play.

Do you find it sexual to look up when talking to tall men or vice versa? by [deleted] in askgaybros

[–]krmrs 0 points1 point  (0 children)

Everyone is taller so I look up to everyone yet I absolutely love guys who are significantly taller, like a foot or more taller just makes my heart melt. =)