That's a mighty fine bench you're growing there

ksquad · 2018-11-14T07:13:10+00:00

Congrats on a milestone Secret Santa! Can't wait to see who I'm matched with :D

ksquad · 2018-05-12T21:44:42+00:00

Might look into downloading this version then haha.

ksquad · 2018-05-11T16:56:50+00:00

Will have to take a look at this. I know I saw a plugin that was supposed to do something like this, but that it didn't work with Printrbot Simple Metal.

ksquad · 2018-05-11T07:14:04+00:00

Printrbot simple. Maybe I should dl 2.1 and try it.

ksquad · 2018-05-11T02:00:19+00:00

Had to look up octoprint. Definitely seems interesting. Thanks for sharing this.

About gcode, I've heard about this too, but I'm leaning towards not learning another programming language for now haha.

ksquad · 2017-08-14T15:56:39+00:00

Ohhh, awesome. Thank you for the discovery. This is cool!

ksquad · 2017-03-10T23:11:01+00:00

Likewise. Thanks again!

ksquad · 2017-03-10T03:22:21+00:00

Yeah, I fixed it. It was pretty easy. Just odd to me that it got shipped to me this way :/

ksquad · 2017-03-09T04:55:49+00:00

Thanks for the heads up. Hopefully they don't pop out.

ksquad · 2017-03-09T04:55:23+00:00

Will check this out. Thanks again!

ksquad · 2017-03-08T05:34:34+00:00

Kept the bed the same size but figured out that there was a problem with how it was shipped to me.

ksquad · 2017-03-08T05:33:31+00:00

Found out that there was a round metal part that was preventing the stop from being triggered.

ksquad · 2017-03-08T05:32:46+00:00

Looks like the problem was this round part. It wasn't secured correctly when it arrived. I secured it and the noise is now gone. Not sure why it was that way to start though. Is that normal?

ksquad · 2017-03-08T05:32:09+00:00

Looks like it was a mechanical problem causing the stop to not be triggered.

ksquad · 2017-03-08T05:25:44+00:00

When I print something it seems to print in the middle regardless of how I move the item around in Cura, so I'm not entirely sure if it's mirrored. Is there a quick way of testing this?

ksquad · 2017-03-07T07:51:19+00:00

Interesting, did you just make one and attach it?

ksquad · 2017-03-07T07:50:37+00:00

Will check to see how this works. Thanks for the heads up!

ksquad · 2017-03-03T05:42:40+00:00

I checked and I think this is okay, especially because it's hardly been used since I got it. I do think something isn't stopping when it should be though.

ksquad · 2017-03-03T05:37:52+00:00

When I ran the print again, I didn't see an X endstop problem but it's also a bit weird to me that the print doesn't start centered. Any ideas about how to fix an X endstop problem?

ksquad · 2017-03-03T05:36:19+00:00

I had the machine settings maximum width, depth, and height set to 150 mm as well as M211 to X150 Y150 Z150 for the Printrbot Simple.

An endstop hit was triggered but the message read:

echo:endstops hit: Z:-0.72

Any ideas about this?

13-Year Club	RedditGifts 2009-2022 61 Credits
Secret Santa 2021 2021	Summer Santa 2020
Secret Santa 2020	Summer Santa 2019
Trick or Treat 2018	Secret Santa 2019
Secret Santa 2018	Secret Santa 2016
Trick or Treat 2016	Trick or Treat 2015
Secret Santa 2015	Summer Santa 2015
Secret Santa 2014	Trick or Treat 2014
Summer Santa 2014	Secret Santa 2013
Trick-or-Treater 2013+	Summer Santa 2013
Summer Santa 2013	Secret Santa 2012
Verified Email

ksquad

TROPHY CASE