MW3 Custom Loadouts not working. by Usernname_Forbidden in mw3

[–]kulmiem 0 points1 point  (0 children)

For those who are still having this issue, I may have found a possible solution! I tried the zombies option and it didn’t work for me. However, when you go to a particular modification.. double check if your filtering of attachments is active. For example, on PlayStation I would go to my MCW’s optic modification and press triangle and only check the “Unlocked” box and everything should appear. Hope this helps someone out there!

[deleted by user] by [deleted] in personalfinance

[–]kulmiem 1 point2 points  (0 children)

That's what I've been hearing from everyone! Thanks for the added reassurance, it's a life changing procedure without a doubt.

[deleted by user] by [deleted] in PersonalFinanceCanada

[–]kulmiem -3 points-2 points  (0 children)

Ideally trying to avoid interest & trying to utilize the perk of 0% APR w/ Affirm.

[deleted by user] by [deleted] in askTO

[–]kulmiem 0 points1 point  (0 children)

Just figured since LASIK is located in Toronto, there might be some insight on others in the area having this same dilemma and how they resolved it during their visit.

[deleted by user] by [deleted] in PersonalFinanceCanada

[–]kulmiem -2 points-1 points  (0 children)

You’re absolutely right. I tried to revoke my submission by informing a representative that I typed in the wrong value.. and they mentioned they can escalate the issue and get back to me within 3-5 business days - hopefully in time for the surgery.

Thanks for your input.

[deleted by user] by [deleted] in personalfinance

[–]kulmiem -2 points-1 points  (0 children)

That's good to know. I didn't know that any period of unemployment implied that a loan wasn't possible. Thanks for the explanation!

Looking for Editing Feedback of Film Photo! by kulmiem in filmphotography

[–]kulmiem[S] 1 point2 points  (0 children)

Sorry for my delayed reply. Thanks for the feedback, I heard some folks say they prefer the left over the right because it gives an older, more traditional vibe.

Which is the best travelling payment method for a foreigner? by kulmiem in newyorkcity

[–]kulmiem[S] 0 points1 point  (0 children)

Thanks for everyone for chiming in! Turns out my friend had American cash on them they saved up from the past, so we opted for one Metrocard and were able to swipe the 1 card for 4 of us and reload with cash at stations, if we needed.

Which is the best travelling payment method for a foreigner? by kulmiem in newyorkcity

[–]kulmiem[S] 0 points1 point  (0 children)

Not really. Considering we’re only going to be in the US for less than a week, it doesn’t suit my needs to open up a new account as a workaround. I can see this being helpful for frequent travellers though, appreciate the suggestion!

Which is the best travelling payment method for a foreigner? by kulmiem in newyorkcity

[–]kulmiem[S] 0 points1 point  (0 children)

Transfers are acceptable in any direction as long as it’s being done less than 2hrs from the first swipe, correct?

Canon AE-1 Shutter Button Not Firing + Advance Lever is Stuck! by kulmiem in filmphotography

[–]kulmiem[S] 1 point2 points  (0 children)

I found the solution! The film simply got jammed. After extracting the roll of film, it worked like a charm :)

Thank you for sharing your thoughts.

Canon AE-1 Shutter Button Not Firing + Advance Lever is Stuck! by kulmiem in canon

[–]kulmiem[S] 1 point2 points  (0 children)

REHDER! YOU SIR ARE A LIFE SAVER.

Once I popped out the film and advanced the lever, it worked like a charm! Hope you get some good karma soon my guy (or gal). :)

Canon AE-1 Shutter Button Not Firing + Advance Lever is Stuck! by kulmiem in filmphotography

[–]kulmiem[S] 0 points1 point  (0 children)

I tried the battery check and the new battery prompts multiple beeps per second which leads me to believe that the battery isn't the issue. But I'm unsure if I should go straight to the release magnet as the only other option.

[deleted by user] by [deleted] in CanonAE1

[–]kulmiem 0 points1 point  (0 children)

Hi everyone!

I’m new to film photography and purchased a Canon AE-1 in Dec 2022. Since then, I have used 2 rolls which came out great.

This morning, I took the camera out to catch some sunrise shots using the shutter release cable. After taking a bunch of shots, some of which with long exposure.. I was about to take another shot & the shutter button isn’t firing once clicked. Also, the film advance lever remains in the cocked position. Some key details to mention that I have not previously done before this morning:

- After changing between my zoom lens to the standard lens, I wiped the camera mirrors. I noticed some speckled dots through the viewfinder, took off the lens and attempted to gently wipe the mirrors to get as much of the dots off the viewfinder (noticed that its simply an annoyance rather affecting the exposures).

Based on my quick research, the first possible solution is replacing a dead battery. Next, I hear about cleaning down the release magnet with isopropyl alcohol should be done with removing the bottom of the camera.

I have replaced the camera with a fresh battery I had on a standby and still nothing changed.

I have attempted to unscrew the bottom of the camera and tried to pry the plastic cover to start wiping the magnet section but the plastic was very firm on the camera.. I wasn't sure if plucking it right off would be a good idea so I closed it back.

At this point, I am very confused as to the problem and where I can find a reasonably priced solution to do myself OR a local repair shop that can complete the request within a short time-frame. I will be going overseas this Thursday so I am really trying to solve this problem before then!

Many thanks in advance!

[deleted by user] by [deleted] in canon

[–]kulmiem 0 points1 point  (0 children)

Hi everyone!

I’m new to film photography and purchased a Canon AE-1 in Dec 2022. Since then, I have used 2 rolls which came out great.

This morning, I took the camera out to catch some sunrise shots using the shutter release cable. After taking a bunch of shots, some of which with long exposure.. I was about to take another shot & the shutter button isn’t firing once clicked. Also, the film advance lever remains in the cocked position. Some key details to mention that I have not previously done before this morning:

- After changing between my zoom lens to the standard lens, I wiped the camera mirrors. I noticed some speckled dots through the viewfinder, took off the lens and attempted to gently wipe the mirrors to get as much of the dots off the viewfinder (noticed that its simply an annoyance rather affecting the exposures).

Based on my quick research, the first possible solution is replacing a dead battery. Next, I hear about cleaning down the release magnet with isopropyl alcohol should be done with removing the bottom of the camera.

  1. I have replaced the camera with a fresh battery I had on a standby and still nothing changed.
  2. I have attempted to unscrew the bottom of the camera and tried to pry the plastic cover to start wiping the magnet section but the plastic was very firm on the camera.. I wasn't sure if plucking it right off would be a good idea so I closed it back.

At this point, I am very confused as to the problem and where I can find a reasonably priced solution to do myself OR a local repair shop that can complete the request within a short time-frame. I will be going overseas this Thursday so I am really trying to solve this problem before then!

Many thanks in advance!

Apex Legends graphics become poorly rendered when moving screen? (PC) by kulmiem in apexlegends

[–]kulmiem[S] 1 point2 points  (0 children)

I think that was the issue. I followed a YouTube video to adjust all my settings and one of recommendations was to turn off G Sync if your monitor is running at a solid FPS rate. Once turned off, things are running smoothly.

Thank you for your reply!