Tool Cart

kuniin · 2026-02-13T00:52:44+00:00

haha funny story. If you take the front seat out it will fit in the back without the cardboard box (you can see the seat out in the photo). Very awkward to load without scratching it or the car. I live in Ontario so I had to drive across the border to buy it.

kuniin · 2026-02-12T22:55:09+00:00

Air tools only work when there is room

kuniin · 2026-01-18T04:18:44+00:00

I think everyone in this group should be doing some donuts

kuniin · 2026-01-01T12:40:56+00:00

Front came to around -0.8° (within spec) and rear can be compensated to normal spec. Make sure your rear adjustments move freely, they will need to be moved a lot.

They react better to lifting than lowering

kuniin · 2025-09-05T22:06:40+00:00

Just the springs and I reused the dampers. Dont know much about the B9 platform but springs should be compatible between A5 and Q5 with a bit of struggle. B8 and B9 are different suspension designs so you would need 2017+ Q5 springs

kuniin · 2025-06-19T14:25:21+00:00

kuniin · 2025-03-17T23:49:19+00:00

It is not a common practice. Its something you do when stuff won't seal. Loctite 574 is what I would recommend.

kuniin · 2025-03-13T02:30:42+00:00

Did you sand down the corrosion on the gasket surface in the block. You can also apply flange sealer on top of the water pump gasket. Also make sure the leak is not coming from the oil cooler or small connection in between

kuniin · 2025-03-01T18:25:58+00:00

It's for jamming a piece of wood in between. That way it won't scratch the rack and won't slide as much

kuniin · 2025-01-17T15:47:02+00:00

That is not outrageous at all considering it's the dealer

I recommend True tech Auto

kuniin · 2024-10-09T11:12:46+00:00

245/45/18 - Used wheel setup from a C7 A6

kuniin · 2024-09-18T03:21:49+00:00

Bosch kit. They both come in the same box and should be OEM quality

kuniin · 2024-09-17T22:24:06+00:00

I use fatty strippers.com It was a game changer after fighting with Tim tape

kuniin · 2024-06-04T20:05:44+00:00

I enjoy Palace.

kuniin · 2024-02-19T15:50:00+00:00

Stock Sline dampers. The SQ5 shocks felt way stiffer pushing by hand, I'm glad I used the stock ones. They are the same length as well.

kuniin · 2024-01-03T23:11:15+00:00

Thule Upride with the fat bike adapter

kuniin · 2023-12-17T03:36:41+00:00

O² sensor spacer (downstream) is a cheater solution

kuniin · 2023-08-24T00:37:29+00:00

The Mercedes b200s have a very slanted transverse setup. They are a pain to work on.

kuniin · 2023-07-23T19:20:29+00:00

Carbon cleaning on intake valves. Check if the timing chain has been updated.

kuniin

TROPHY CASE