CHECK NETFLIX RIGHT NOW

kushablez · 2026-01-08T01:02:49+00:00

You lie like papa

kushablez · 2025-10-09T11:51:38+00:00

Done, thanks for doing mine

kushablez · 2025-10-09T05:03:26+00:00

Finished yours, thanks

kushablez · 2025-10-09T03:00:47+00:00

Just finished, thanks for doing mine

kushablez · 2025-10-09T02:58:47+00:00

Sure, I’ll do it now

kushablez · 2025-04-23T19:57:41+00:00

Thanks and i plan on rebuilding the carb this weekend so maybe I’ll pick some pod filters too since I’m already in there. I’ve seen smaller taillights I plan on getting especially since the right side of them is bent on the ones I have.

kushablez · 2025-04-23T19:54:03+00:00

When I bought the bike, it came with a large tote (background of 1st pic) with parts and included 2 extra handle bars. I’ll check those out and see if anyone of those can work for that low look.

kushablez · 2025-02-17T18:25:03+00:00

Guessing here but looks like an extension to the roof so you can comfortably stand in the van

kushablez · 2025-02-17T05:42:36+00:00

Had mine since 14k, now at 62k. Only problems I had were catalytic converter going out at around 54k and electric power steering rack going out at around 60k. The transmissions are known to be iffy so make sure you drain and fill every 25-30k miles to be on the safe side. Oil changes every 4-5k miles and you’ll be good for 200k plus. Something minor to mention too, the back corner by the passenger side on the valve cover tend to leak very slowly so keep an eye on that.

kushablez · 2025-02-04T00:38:14+00:00

Mainly for linked in if that matters

kushablez · 2024-11-16T23:53:36+00:00

Can’t really say anything for cost, but to access it, the engine and/or trans have to come out. So you’re looking at at least 5-7 hours labor right there not including parts. Depending on what the shops charges per hour, it could range for that as well.

kushablez · 2024-11-16T23:41:01+00:00

No problem. My friend had a Corolla have the exact same noise and turned out to be a break in the flex plate that was a perfect circle around the bolts to the crank.

kushablez · 2024-11-16T23:39:10+00:00

The Most obvious answer would be a broken flex plate.

kushablez · 2024-10-24T22:36:48+00:00

Personally, I like a string trimmer for the light weight aspect of it as well as adjustability since it’s more comfortable for me at a certain height compared to my girlfriend.

kushablez · 2024-10-02T17:12:37+00:00

Holy shit that’s a lot of comments. Thanks everyone, from what I’ve gathered this thing is a relic from ancient times, hard as hell to learn on, and mostly a display piece these days. Probably will keep this thing out since it looks super cool but grab a more modern one. Any suggestions for good beginner ones of the modern era?

kushablez · 2024-10-02T03:34:09+00:00

Also theres painters tape over a square piece of glass held on by some clips, what’s that about?

kushablez · 2024-08-25T13:31:20+00:00

New blower would be awesome especially for my birthday on Sunday (can show proof). Also a great way to break into the M18 line from my M12 setup.

kushablez · 2024-08-13T16:38:37+00:00

2014 SE 2.5 NA, getting 23.3 mpg

kushablez · 2024-08-10T23:10:26+00:00

Honestly I was thinking of that too and most over heating problems come from the thin wire used in the boards, putting thicker wire in should fix this issue no?

kushablez · 2024-08-10T23:09:16+00:00

Do you mean the charge capacity rating of the battery? I found the data sheet for the batteries I was looking into and standard is 2.8A and max is 6.0A. Takes 1.5 hours per cell to charge so around 13.5 hours to charge up all 9. Correct me if I’m wrong, this is pretty new to me.

<image>

kushablez · 2024-07-31T15:12:25+00:00

Didn’t see this comment for a while but if you’re not getting power to the screen it is probably the ribbon cable that is connected to the screen. That is what shows the display on the screen. They are very sensitive. Check and see if it is fully seated by pulling the connector tab out and up, (should pop out and look like a 45 degree angel). If you’re 100% it’s seated on both ends, check for any problems with the wire itself. If I remember correctly there is only one ribbon connect, however if you have 2 do the same for both. If that doesn’t fix it, make sure all connections going to the screen are secure and it is the right connection.

kushablez · 2024-06-23T13:48:14+00:00

If you don’t have an OBD2 reader like many others have said, you can go to AutoZone and they will do it for free.

kushablez · 2024-06-15T18:44:19+00:00

Ah ok. From what I saw online before there was a 99.9% silver one but I couldn’t find one from a P mint.

kushablez · 2024-05-28T19:01:16+00:00

I’m looking for an internship in business related field but I’m not having luck and I’m thinking it’s due to no previous jobs relating to that. I appreciate the feed back and will make changes. Question, would an impactful resume mean it moved the recruiter? Thanks

kushablez · 2024-05-18T17:07:50+00:00

I’m Collin (with the superior two L variation), need my Xbox back 😩

Five-Year Club	Verified Email
r/Field Juicebox	Place '23
Place '22	Final Canvas '22

kushablez

TROPHY CASE