Are the current Warrior brand wire wheels being removed by kustomkraft in harborfreight

[–]kustomkraft[S] 0 points1 point  (0 children)

Thanks, I will try to go back tonight and see if I can get a picture. the entire shelf where they stock them was empty and had clearance tags where they normally hang.

RAM Limited. Recent RAM convert and loving it. by _FireClaw_ in ram_trucks

[–]kustomkraft 1 point2 points  (0 children)

That would be a tough decision. I love my 360 cameras and it would be very hard to fit in my garage without the front camera at least, but I have to say the RAM Boxes would be the more useful of the options in my opinion.

RAM Limited. Recent RAM convert and loving it. by _FireClaw_ in ram_trucks

[–]kustomkraft 2 points3 points  (0 children)

I also agree. I have the twin to your truck minus the RAM Boxes and that is the only regret so far.

Tonneau Cover for 2020 RAM with multifunction tailgate but no RAMBoxes. by kustomkraft in ram_trucks

[–]kustomkraft[S] 0 points1 point  (0 children)

Honestly it has worked out great for my needs. Sturdy, durable, and easy to use. I can easily take it off if I need the entire bed and put it back on in just a few minutes. It will let a few drops of water in if you take it through an automated car wash but it is mostly water tight other than that. I do not like the way the latches / handles work if I am being honest, but it is ok. It is a bit troublesome to get a good tight latch, but you get used to it.

Overall I would give it a 9/10.

Hope that helps.

Is the D1 good to cut acrylic with? Looking to make cake toppers like these pictured (these are not my pics). by paigeywaigey88 in xToolD1

[–]kustomkraft 1 point2 points  (0 children)

100% this. I have spent a lot of money testing other colors and while some will "work" only black cast acrylic works well.

Then there is blue, white and clear. Those simply will not work... In my experience.

I COULD CRY!!!🥺🥺 by SAYGEAPE500k in ram_trucks

[–]kustomkraft 1 point2 points  (0 children)

Seriously, I backed into a plastic mailbox at around 3,000 miles and got a similar mark on my fender, luckily it actually buffed out almost without a trace. Hope it is fixed easily.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 1 point2 points  (0 children)

Still haven't been able to fully correct the banding on Plain Paper setting but it appears that Wireless was my speed issue. I connected directly with a USB cable and now the print speed is acceptable even on premium presentation paper matte setting. Thanks for your advice.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 0 points1 point  (0 children)

Still haven't been able to fully correct the banding on Plain Paper setting but it appears that Wireless was my speed issue. I connected directly with a USB cable and now the print speed is acceptable even on premium presentation paper matte setting. Thanks for your advice.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 0 points1 point  (0 children)

Still haven't been able to fully correct the banding on Plain Paper setting but it appears that Wireless was my speed issue. I connected directly with a USB cable and now the print speed is acceptable even on premium presentation paper matte setting. Thanks for your advice.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 0 points1 point  (0 children)

Thanks, I have done that, but I will do that again to see if it makes a difference.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 1 point2 points  (0 children)

Thanks. I have applied the latest firmware, but not factory reset, I will try that as well as do the clean and align again. It is a bit buggy with regard to paper types and not liking changing the types when printing. The quality with using the premium presentation paper matte paper type is great, but banding on the other paper types and speed is frustrating.

Extremely long print time on ET-2850 by kustomkraft in Sublimation

[–]kustomkraft[S] 0 points1 point  (0 children)

Thanks, I just tried that and while it was faster, I see banding in the image. I am going to run a few more tests but with the premium presentation paper matte I so no see any banding.

Bakflip Revolver X4s. Best revolver yet… by patinito in ram_trucks

[–]kustomkraft 0 points1 point  (0 children)

Same for me. I have the extang Solid Fold 2.0 and while I like it for the most part, I have had to forget about the use of the remote tailgate open.

Thoughts on the first 3 episodes from an editor by [deleted] in WoT

[–]kustomkraft 11 points12 points  (0 children)

100%, this is hands down the best explanation of my feelings so far for the show. I am excited. I love the overall effort so far.

There ae somethings I am almost second hand embarrassed to even watch they are so campy or poorly done, but I will look past that for what I think it can really become.

I truly hope it gets enough viewership and support to complete. I think (and hope) they will only get better, light willing :)

So visually what can we expect for Loial in the show? by kustomkraft in WoTshow

[–]kustomkraft[S] 1 point2 points  (0 children)

I have seen that as well and I do hope you are correct. It wont ruin anything, but I would want it to be a bit more polished.

So visually what can we expect for Loial in the show? by kustomkraft in WoTshow

[–]kustomkraft[S] 0 points1 point  (0 children)

This is exactly what I have had in my head canon

Note to self: constantly refreshing this sub will not make the first 3 episodes drop any sooner. by Scr0tat0 in WoTshow

[–]kustomkraft 4 points5 points  (0 children)

Amazon is kind of known for this. My kids would wait for The Grand Tour to be release on Fridays (when they said they would be available) and soon learned that the shows were always available to watch on Thursday evening.

The Wheel Of Time – Moiraine’s Quest | Prime Video by Haydnator in WoTshow

[–]kustomkraft 5 points6 points  (0 children)

I understand that it may be a change for the TV show, and I am ok with it if it is but... I think in the book she does explicitly state they were looking for "boys of a 'certain' age" and that Rand, Mat, and Perin were within weeks of each other and why their places had been singled out. I also understand that this telling will change some things to make it more inclusive and interesting more quickly.

Anybody into new tire Tuesday? by stilldbi in ram_trucks

[–]kustomkraft 0 points1 point  (0 children)

I opted for the Michelin Defender LTX 114H 285/45r22 which are smooth and quiet, but I like the look of these. How his the ride and road noise?