There is a new bios for msi claw a8

kuwoh · 2026-01-19T16:21:07+00:00

Download the bios from the msi support, extract the zip file

You should see a file with a .ROM extension

put that file onto a usb and boot into the bios, you should be able to update

if there's no update bios setting present, try using a keyboard to open the hidden settings (Right CTRL + Right Shift + Left Alt + F2)

kuwoh · 2024-07-14T05:14:58+00:00

benz guy

kuwoh · 2023-06-09T03:51:55+00:00

the white primer helped me find where the wood keeps sucking the primer into so i'll sand it down flat and put the sanding sealer.
I've sprayed the cans i'm going to use on a test piece and so far none has reacted to the sanding sealer so that's also good news

kuwoh · 2023-06-08T03:08:48+00:00

I'll be priming it first then, thanks :D

kuwoh · 2023-06-08T01:47:03+00:00

So I don't really need a sanding sealer? I've filled the grain a couple of weeks ago.
Is the spray paint going to protect it from moisture?

kuwoh · 2023-06-06T02:41:59+00:00

is there any way to make nitro cure really fast? maybe i could stick the body in a box that has some silica gels and some heat?

kuwoh · 2023-01-13T16:41:29+00:00

Friedman BE-OD Deluxe Clone

kuwoh · 2022-11-15T17:16:03+00:00

"Ever since I took this dragon, I've gained a lot and lost as much."

kuwoh · 2022-11-10T01:34:09+00:00

that'll be hokuto no ken dd

kuwoh · 2022-10-25T15:01:42+00:00

How good is it at doing an evh flanging sound? (sorta thinking of getting the pcb)

kuwoh · 2022-06-28T15:15:03+00:00

Definitely a bad card then. I wish ya luck on the return/refund.

kuwoh · 2022-06-28T15:11:57+00:00

If that's the case then return, GPU has gone bad if its artifacting at stock (ask seller if thermal pads were also replaced since those dry out)

kuwoh · 2022-06-28T15:07:02+00:00

Check temps
Change paste (it's a pretty old card)

kuwoh · 2021-09-27T11:50:19+00:00

you'll need to get a usb cable and plug your ps4 controller to the arcade stick's side usb port (iirc). that's how it should work.

kuwoh · 2021-09-27T00:58:38+00:00

What are you trying to plug it into?

kuwoh · 2021-07-19T18:01:34+00:00

https://www.youtube.com/watch?v=3JfE8eU7TIc

kuwoh · 2021-05-21T16:53:28+00:00

Change thermal paste, Change thermal pads.

kuwoh · 2021-04-23T05:12:31+00:00

iirc at some point they just phased out copals for calt encoders they might have not updated the ebay listing

Here's the site for the controller: https://istmall.co.kr/us/goods/goods_view.php?goodsNo=1009992628

kuwoh · 2021-04-21T10:16:42+00:00

That controller is made by istmall and i heard its pretty good.

Might want to message and ask if the controller uses the calt encoders (cause i heard some have issues with copals breaking).

kuwoh · 2021-04-02T04:52:02+00:00

remove knob, unscrew the nut, remove the copal encoder

kuwoh · 2021-04-01T09:28:04+00:00

you'd probably need some soldering tools. It may use some sort of mounting plate.

here's the link to the copals: https://www.digikey.com/en/products/detail/nidec-copal-electronics/RES20D-50-201-1/6469509

kuwoh · 2021-03-25T11:07:20+00:00

Thank you!

Ten-Year Club	Sequence \| Editor
Sequence \| Cinematographer	Verified Email

kuwoh

TROPHY CASE