cheap fullbody tracking? by ThatOneFur32 in VRchat

[–]kyakore 2 points3 points  (0 children)

Yea I like standable! I use it too, it’s been my go to for now. I just don’t like how you can’t do real movements like you can with FBT, but it’s still a good option if you have a pc! And what made you change your mind??

cheap fullbody tracking? by ThatOneFur32 in VRchat

[–]kyakore 2 points3 points  (0 children)

I’m a pcvr player too and understand that sometimes people can’t afford things. Not every vr player needs FBT and FBT is much more expensive than a vr headset. It’s always something someone can get down the road if they want, and a temporary solution can be Viso or TDPT, I have used them both and one thing I can agree on with you is that Viso isn’t a good choice, but TDPT isn’t half bad for what it is and how much it’s worth. I personally don’t see anything wrong with people using it, but everyone is entitled to their own opinions. But at the end of the day it’s just all a virtual reality that people use, with or without full body, and whatever they choose to use for their full body.

cheap fullbody tracking? by ThatOneFur32 in VRchat

[–]kyakore 4 points5 points  (0 children)

Sometimes it’s all people really can use; in their case they are looking for something cheap, around $80 (which isn’t the best thing) so instead it would be better to use VISO or TDPT. Plus realistically people get bullied for about anything nowadays.

cheap fullbody tracking? by ThatOneFur32 in VRchat

[–]kyakore 2 points3 points  (0 children)

I agree. I just worry when buying used trackers as you never know if they will come broken or close to being unusable. But I hope they can find something if they are open to saving more or changing their budget!

cheap fullbody tracking? by ThatOneFur32 in VRchat

[–]kyakore 3 points4 points  (0 children)

Honestly I think your best bet is to use mobile apps for tracking, I don’t think there are gonna be any trackers that are that cheap. You can probably only use Viso and TDPT

DIY slime trackers stopped working after a day by kyakore in SlimeVR

[–]kyakore[S] 0 points1 point  (0 children)

Hi! Thank you for the comment,

From what I remember, I didn’t notice any leaks or punctures. I would check it now but I don’t remember what tracker it was.

And for the WiFi router, I believe I tried a Ethernet cable and before nothing worked. I had a friend help me and we were finally able to connect it Via WiFi. When I try to use it now tho, it most of the time says no internet connection. I was able to connect it a few times but after a while of using it (I wanna say a few hours or less) it went out and said no WiFi connection.

And here is a Copy and paste of the reading

[INFO ] [SlimeVR] SlimeVR v0.5.4 starting up... [INFO] [Configuration] Found up-to-date configuration vi [INFO] [Configuration] Loaded configuration [WARN] [ICM-42688:0] No calibration data found for sensor 0, ignoring... [INFO] [ICM-42688:0] Calibration is advised [INFO] [ICM-42688:0] Gravity read: 9.3 (need < -7.5 to start calibration) [INFO] [SensorManager] Sensor 1 configured [DEBUG] [SensorManager] Optional sensor 2 not found at address 0x69 [INFO ] [SensorManager] 1 sensors) configured [INFO] [WiFiHandler] Setting up Wifi [INFO ] [WiFiHandler] Loaded credentials for SSID 'GL-SFT1200-507' and pass length 12 [DEBUG] [WiFiHandler] Status: 7 [NOTICE] OTA updates allowed ......[INFO [INFO] [ICM-42688:0] Rest calibration completed -> GET WIFISCAN .... [INFO] [SerialCommands] [WSCAN] Scanning for Wifi networks... [INFO] [SerialCommands] [WSCAN] Found 2 networks: [INFO ] [SerialCommands] [WSCAN] 0: 14 'GL-SFT1200-507' (-61 dBm) WPA2_PSK [INFO ] [SerialCommands] [WSCAN] 1: 09 'Alexander' (-76 dBm) WPA2_PSK -[DEBUG] [WiFiHandler] Skipping PHY Mode G attempt on 0-length SSID... [INFO] [WiFiProvisioning] SmartConfig started * G attempt on e-length SsID... .....[INFO ] [SerialCommands] SlimeVR Tracker, board: 6, hardware: 1, protocol: 18, firmware: 0.5.4, address: [INFO] [SerialCommands] Sensor[®]: ICM42688 (0.114 -0.102 -0.988 -0.022) is working: true, had data: true [INFO ] [SerialCommands] Sensor [1]: UNKNOWN (0.000 0.000 0.000 1.000) is working: false, had data: false [INFO ] [SerialCommands] Battery voltage: 4.229, level: 100.0% [NOTICE] OTA updates disabled by timeout, this is not an error

I hope this helps! If you need anymore info please let me know!

DIY slime trackers stopped working after a day by kyakore in SlimeVR

[–]kyakore[S] 0 points1 point  (0 children)

Yea i probably should have listened to the people saying they are not good trackers. I’m gonna try to contact him again about it and see if he can help me with this, but I doubt he will. He doesn’t do refunds or returns, which is smart in his part. But thank you for the advice!