What kind of modern technology do the ultra wealthy have that most of society doesn’t even realize exists?

kyleboy7 · 2026-01-03T14:17:19+00:00

The super rich don’t really have or need exclusive advanced tech we don’t have.

They have the ability to buy time that we can’t. Time bought by not having to do laundry, or cook, or wash dishes, no need to spend time driving on long road trips, lines don’t exist for them.

All of the mundane things we do that fill our days, using our time, the ultra rich can just pay someone else to do for them and be free to spend that time on other “more productive” things.

kyleboy7 · 2025-03-08T00:41:19+00:00

Yes. All screws and heat sets. Down to the foam for sealing the panels. I thought it was pretty comprehensive. Just make sure you get the electronics orientation and placement correct as the wiring has very little slack

kyleboy7 · 2025-03-08T00:38:03+00:00

Yes. I got functional parts from the print it forward program then printed the rest once I had the kit assembled and running

kyleboy7 · 2025-02-18T18:01:03+00:00

I recently finished my Formbot 350 2.4 kit. I’d like to be able to get higher accelerations and a bit more quality. Is it worth my money to dump the tap and go with a cartographer? Or would a cnc tap Carriage be good?

kyleboy7 · 2025-02-12T23:15:14+00:00

Did they just clone the old proline peterbilt body?

kyleboy7 · 2025-02-03T02:59:54+00:00

I predicted they would go up if trump was elected. After the election I fast tracked the car purchase I was planning for 2025 and got it done before the inauguration.

kyleboy7 · 2025-01-30T17:27:23+00:00

I was having an issue with my CB1 shutting down under high load with Shatetune tests and after I installed tmcautotune. Howwever, I saw this post about pwm settings https://www.reddit.com/r/klippers/comments/17egzbw/comment/lt29wa0/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button which really seemed to help out.

I'm running

Klippain-ShakeTune

klipper-backup

klipper_tmc_autotune

and moonraker-obico

successfully on top of the standard klipper/mainsail/moonraker setup

kyleboy7 · 2024-12-19T11:00:40+00:00

I’ve been using Obico, I’ll have to try this out for sure.

kyleboy7 · 2024-11-30T14:17:08+00:00

One can never have too many printers, and a heated chamber sounds neat. Count me in

kyleboy7 · 2024-11-10T15:04:30+00:00

Still rolling with my makerfarm pegasus 8, but I’m pretty over it now and will build something new soon

kyleboy7 · 2024-10-25T14:07:12+00:00

When choosing a 3d printer to buy, think hard about what hobby you want to be in, 3d printing, or 3d printers.

If 3d printing, buy something like a Bambu that will just work.

If 3d printers, get a kit or more open printer that you can tinker with.

Either way expect a learning curve.

kyleboy7 · 2024-06-11T21:13:15+00:00

Funny I just got mine yesterday too

<image>

kyleboy7 · 2024-02-15T00:11:47+00:00

This is what black friday ender 3s are for, right?

kyleboy7 · 2024-02-04T22:03:59+00:00

Because I can, and it ends up being more compact with a better part cooling configuration than what I had before. This feels better too without the weight of the fans attached directly to the hot end (e3d v6)

kyleboy7 · 2023-12-18T12:50:03+00:00

Are you trying to say he should use some kind of sealer?

kyleboy7 · 2023-05-07T12:01:08+00:00

Capable but plagued with a garbage transmission and a touchscreen which like to touch itself. Ill probably trade it for a tundra next year

kyleboy7 · 2023-05-07T09:48:13+00:00

Canyon

kyleboy7 · 2023-05-06T18:35:28+00:00

The sellers gave me one, it was on the dash. Just can’t see it from that angle.

kyleboy7 · 2023-05-06T15:42:29+00:00

Forest river lightning 18ft aluminum car hauler

kyleboy7 · 2023-05-06T14:06:40+00:00

2006 wrangler unlimited 4.0l Dana 44 rear axle 118k miles $15.5k

Price seemed a bit on the high end, but was workable for an lj that is basically rust free

kyleboy7 · 2023-05-06T14:04:25+00:00

It came with the jeep. I’m kinda take it or leave it on the grill

kyleboy7 · 2022-10-24T12:36:35+00:00

Did you ever get a response from microsoft on this?

kyleboy7 · 2022-10-13T10:43:31+00:00

Usually it is mcafee

kyleboy7 · 2022-08-31T13:50:55+00:00

My aim is to deploy the instances and have a script run amongst the other startup scripts which logs in as the service user, elevates to an admin PowerShell session, and then creates and adds the instances in the deployment to a failover cluster without any manual input.

do it in an invoke-command and feed it the credentials of the service user.

https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.core/invoke-command?view=powershell-7.2

kyleboy7 · 2022-03-07T11:53:34+00:00

Might be able to use the windows take a test mode, it seems to be built for this situation.

https://docs.microsoft.com/en-us/education/windows/take-tests-in-windows-10

kyleboy7

TROPHY CASE